DOI QR코드

DOI QR Code

The Intrinsic Safety Evaluation of Solar Photovoltaic Cell

태양전지셀의 본질안전 방폭성능 평가

  • 이춘하 (호서대학교 소방방재학과) ;
  • 지승욱 (호서대학교 소방방재학과) ;
  • 김시국 (호서대학교 소방방재학과)
  • Received : 2011.04.05
  • Accepted : 2011.05.18
  • Published : 2011.07.31

Abstract

Now the world will regulate the CO2 emission due to environmental issues. For an alternative plan photovoltaic system is watched. So, photovoltaic system is trend of big city and it is mandatory for renovation of construction. Oil & gas filling station existed in city is suitable to found the photovoltaic system. But the general photovoltaic system in oil & gas filling station is difficult to found because it is classified into hazardous area. This paper evaluates intrinsic safety evaluation of solar cell for making basic data to found for the photovoltaic system on hazardous area. The intrinsic safety characteristic is evaluated by short-circuit ignition test using IEC type spark ignition test apparatus and temperature rising test. The result of short-circuit ignition test, propane-air mixture gas is exploded on condition that 4 solar cells(9[V], 90[mA]) are connected serially under insolation 800[W/$m^2$]. So, if a larger solar module will be used at oil & gas filling station than we were tested, it needs explosion proof. As the result of rising temperature test, the temperature rising due to short circuit is not so much, but when the temperature rises due to radiant heat, it demands careful consideration for environmental influence.

Keywords

References

  1. 김지산,김성인, "스마트 그리드", 키움증권 산업분석자료, 2009.
  2. 서울특별시 환경정책과, "서울특별시 친환경 건축 기준", 2007.
  3. 노동부고시, "사업장방폭구조전기기계.기구.배선등의 선정.설치 및 보수등에 관한 기준", 제1993-19호, 1993
  4. API RECOMMENDED PRACTICE 500, "Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2", SECOND EDITION, 1997.
  5. 이춘하 외, "방폭시험평가 방안에 관한 연구(I)", 한국기계연구소 연구보고서 UCN 19901328-D, 과학기술처, 1990.
  6. 정국삼, "산업안전공학개론", 동화기술교역, pp.79-170, 1987.
  7. KS C IEC 60079-11, "방폭 기기-제11부:본질 안전 방폭 구조 "i"", 2007.
  8. E. C. Magison : "Electrical Instruments in Hazardous Locations, Third Edition", Instrument Society of America, pp. 37-116, 1990.
  9. KS C 8528, "결정계 태양 전지셀 출력 측정방법", 2005.
  10. 박지홍, "결정질 태양전지의 I-V 특성과 연결방법에 따른 PV 모듈의 출력예측 및 해석", 박사학위논문, 건국대학교, 2009.