Abstract
Shimmy is a self-excited vibration in lateral and torsional directions of a landing gear during either the take-off or landing. It is caused by a couple of conditions such as a low torsional stiffness of the strut, a free-play in the landing gear, a wheel imbalance, or worn parts, and it may make the aircraft unstable. This study was performed for an analysis of the shimmy stability on a small aircraft. A nose landing gear was modeled as a linear system and characterized by state-equations which were used to analyze the stability both in the frequency and time-domain for predicting whether the shimmy occurs and investigating a good design range of the important parameters. The root-locus method and the 4th Runge-Kutta method were used for each analysis. Because the present system has a simple mechanism using a friction to reinforce the stability, the friction, a non-linear factor, was linearized by a describing function and considered in the analysis and observed the result of the instability reduction.
쉬미는 항공기의 이착륙 시 랜딩기어가 주행도중 측방향 및 조향방향의 진동이 발생하는 현상이다. 쉬미 현상은 스트럿의 낮은 강성, 랜딩기어 내부의 유격, 휠의 불균형이나 마모된 부품 등으로 인해 발생하며, 항공기의 안정성을 저하시킨다. 본 연구는 소형항공기의 쉬미 안정성 검토를 위해 수행되었다. 수치해석을 위하여 소형항공기의 전방 착륙장치를 선형시스템으로 모델링하고 상태방정식을 수립하였다. 근궤적 기법을 이용한 주파수 영역 해석과 4차 Runge-Kutta 방법을 이용한 시간영역 해석을 통해 쉬미 현상을 예측하였고 주요 변수의 설계범위를 검토하였다. 현 착륙장치는 와셔의 압축력을 이용하여 조향 방향 마찰을 가함으로써 쉬미현상을 저감하는 기법을 채택하고 있으므로 마찰을 기술함수를 이용하여 선형화시키고 상태방정식에 적용하여 해석을 수행함으로써 쉬미의 발생이 저감되는 결과를 확인하였다.