DOI QR코드

DOI QR Code

도시개발에 따른 국지 바람장 분석

An Analysis of Local Wind Field based on Urban Development

  • 송동용 (상지대학교 환경공학과)
  • 투고 : 2010.10.25
  • 심사 : 2011.02.10
  • 발행 : 2011.04.30

초록

A numerical study with Envi-met model is experimented to investigate the characteristics of wind pattern in Gangwon innovation city. In all case, most conditions such as wind speed, temperature, and surface are considered as the same, but wind direction is the only different factor. The wind directions considered in this study have a meaning of prevailing wind direction. When the prevailing wind with the direction of $247^{\circ}$ blows into the city, the ventilation passage toward the outside of city is formed and the stagnation of air is not expressed. In case of having the direction of $270^{\circ}$, most evident ventilation passages are composed. When the inflow wind direction is the north, $0^{\circ}$, there is some possibility of stagnation phenomenon. The case where the representative wind direction of three kind will flow with development, in compliance with the building is caused by with screening effect of some and shows a true stagnation phenomenon, wishes in the park and flowing water and the greens area to be for a long time formed and the wind direction is maintained.

키워드

참고문헌

  1. 기상청, 1999-2008, 기상연보.
  2. 박명희,김해동, 2006, 고층건물에 의한 기류변형과 열환경 변화에 관한 수치 모의, 한국지구과학회, 20, 8-214.
  3. 박문수,박순웅, 2000, 복잡한 지형에서 대기 난류의 특성, 한국대기환경학회 학술대회 논문집, 2, 194-196.
  4. 송창근,이보람,정관영, 1998, 3차원 바람장 모델을 이용한 비씨물질의 확산 및 농도 추정, 한국기상학회 학술대회 논문집, 348-350.
  5. 정우식, 2007, 아파트단지 환기경로 파악을 위한 주풍향별 바람장 분석, 한국환경과학회지, 467-477.
  6. 주현수,김석철,반지영,최순심, 2006, 도시지역에서의 바람길과 대기질 영향에 관한 연구, 한국환경정책. 평가연구원, 35-71.
  7. 홍정혜,김유근, 2000, 지표면 변화와 인공열이 바람장에 미치는 영향에 관한 수치 시뮬레이션, 한국대기 환경과학회지, 511-520.
  8. Bruse M, 1998, Development of a microscale model for the calculation of surface temperatures in structured terrain, MSc Thesis, Inst. Geo. Univ. Bochum.
  9. Launder B. E. and Spalding D. B., 1974, The numerical computation of turbulent flows, Comp. Methods Appl. Mech. Eng. 3, 269-289. https://doi.org/10.1016/0045-7825(74)90029-2