초록
위성 카메라전자부의 화소간 불균일성 응답의 보정을 위한 4종류의 이득과 오프셋 보정계수에 대하여 다루었다. 이들에 대한 비교분석을 위해서 CCD를 광검출기로 하는 카메라전자부를 새롭게 제작하고, 이를 이용하여 얻은 영상 데이터에 대하여 이들 4종의 보정계수를 이용하여 보정을 실행한 후 각각의 보정 성능을 비교하였다. 일반적으로 보정성능은 기준 영상을 얻기 위하여 사용된 빛입력 레벨의 개수에 따라 달라지게 된다. 쉽게 예상될 수 있는 바와 같이, 2 레벨의 빛입력 기준영상만을 이용하여 얻은 보정계수의 경우 보정계수를 계산하기가 쉽다는 이점을 갖고 있지만, 보정성능은 상대적으로 떨어진다는 것을 확인할 수 있었다. 이에 비해 보정계수를 구하기 위하여 사용된 기준영상의 빛입력 레벨의 개수가 2보다 큰 값으로 늘어날 경우, 보정성능은 개선되었다. 하지만 각각의 보정계수들간의 보정성능 상에는 큰 차이가 없는 것으로 평가되었다.
Four kinds of gain and offset correction coefficients that are used to correct the nonuniformity between pixels are discussed. And their correction performance has been compared by performing image correction. using the correction coefficients calculated, on the real image data obtained from a newly fabricated camera electronics system. The performance of the correction coefficients depends in general on the number of the light input levels used to obtain the reference image. The result shows that, as expected obviously, when only two light input levles are used to obtain the reference image, even though its correction coefficients are relatively easily calculated, the correction performance is relatively poor. And with the number of light inputs increased to a value of larger than two, the correction performance is improved. It is noted, however, no Significant performance difference is found between the different correction coefficients employed.