Abstract
Nitric acid and hydrofluoric acid are used for acid pickling in zirconium alloy tubing manufacturing process. Nitrate and fluoride in the wastewater were treated by chemical coagulation and SOD (Sulfur Oxidation Denitrification) process. This study is investigated the effect of fluoride concentration and the optimal condition for SOD process. The limited fluoride concentration for SOD process was below 20 mg F-/L. The adjusted pH and alkalinity by NaOH and $NaHCO_3$ was shown to be more effective for removal of nitrate compared with using NaOH. Furthermore, the microbial activator mixed trace elements and ingredient for alkalinity did not only supplement with alkalinity but also enhance the growth and proliferation for sulfur-oxidizing bacteria. As a result, the inorganic industrial wastewater was successfully treated by the microbial activator in SOD process without continuous addition of seed sludge. Finally, SOD process was shown to remove nitrate in industrial wastewater and to contribute the microbial activator for activation of sulfur-oxidizing bacteria.
지르코늄합금 튜브 제조공정은 튜브 산세 시 질산과 불산을 사용하고 있어 세척 시 발생되는 폐수의 주요 오염물질인 질산성질소와 불소성분을 제거하기 위한 폐수처리는, 1차 화학응집처리에 의한 불소성분 제거공정, 황산화탈질반응을 이용한 SOD (Sulfur Oxidation Denitrification)공법에 의한 독립영양탈질공정, 그리고 2차 화학응집처리공정으로 구성되어 있다. 본 연구에서는, 처리공정에서 불소의 농도가 황산화탈질공정(SOD)의 탈질반응에 미치는 영향과 황산화탈질반응을 유지하기 위한 최적 운전조건을 검토하였다. 황산화탈질 반응은 불소농도 20 ppm 이하에서 거의 영향을 주지 않았으며, NaOH로 pH를 조절하는 것보다 NaOH와 $NaHCO_3$를 혼합하여 pH와 알칼리도를 조절해주는 것이 질소제거당량을 높여주는 효과가 있는 것으로 나타났다. 또한, 황산화탈질미생물에 필요한 미량원소와 알칼리성분이 혼합된 미생물활성화제가 알칼리도를 보충해줄 뿐만 아니라 황산화탈질미생물의 성장과 증식에도 영향을 주었으며, 그 결과 무기계 산업폐수처리 시 필요한 주기적인 미생물 식종 없이 운전이 가능한 결과를 얻었다. 이상의 결과를 통해, 황산화탈질공법(SOD공법)이 산업폐수의 질산성질소제거에 매우 유용한 공법임이 확인되었으며, 미생물활성화제가 황산화탈질미생물의 활성화에 기여함이 밝혀졌다.