참고문헌
- EG & G Services Parsons, Inc., U.S. Department of Energy Office of Fossil Energy, "Fuel Cell Handbook 5th", 2000, 3-1 - 3-8
- A. Hermann, T. Chaudhuri, P. Spagnol, International Journal of Hydrogen Energy, "Bipolar Plates for PEM fuel cells: A review", Vol. 30, 2005, 1297-1302 https://doi.org/10.1016/j.ijhydene.2005.04.016
- S. Mahabunphachai, O. N. Cora, M. Koc, Journal of Power Sources, "Effect of manufacturing processes on formability and surface topography of proton exchange membrane fuel cell metallic bipolar plates", 2010, 5269-5277
- X. P Niu, B. H. Hu, I. Pinwill, H. Li, Journal of Materials Processing Technology, "Vacuum assisted high pressure die casting of aluminium alloys", Vol. 105, 2000, 119-127 https://doi.org/10.1016/S0924-0136(00)00545-8
- Y. C. Kim, C. S. Kang, J. I. Cho, C. Y. Jeong, S. W. Choi, S. K. Hong. J. Mater. Sci. Technol, "Die Casting Mold Design of the Thin-walled Aluminum Case by Computational Solidification Simulation" Vol. 24, No. 3, 2008, 383-388
- ASM handbook, casting Metal Park, Ohio: ASM international, 1989, 785-91
- N. Kawagoishi, H. Nisitani, T. Toyohiro, N.Yamamoto and T. Tsuno, Trans. Jpn. Soc. Mech. Eng. Part A, "Influence of Microstructures on the Crack Growth Behavior of Small Fatigue Cracks in Squeeze-Cast Aluminum Alloys", Vol. 60, No. 570, 1994, 358-363 https://doi.org/10.1299/kikaia.60.358
- J. Park, X. Li. Journal of Power Sources, "An experimental and numerical investigation on the cross flow through gas diffusion layer in a PEM fuel cell with a serpentine flow channel", Vol. 163, 2007, 853-863 https://doi.org/10.1016/j.jpowsour.2006.09.083
- R. Boddu, U. K. Marupakula, B. Summers, P. Majumdar, Journal of Power Source, "Development of bipolar plates with different flow channel configurations for fuel cells". 2009. 1083-1092
- I. Ohnaka, MARUZEN, "Introduction of Compute Heat and Solidification Analysis", 1985, 167-208
- D. H. LEE, C. G. KANG, S. K. LEE, Journal of the Korean Foundrymen's Society, "Prediction Defect of Automotive Components by Filling and Solidification Analysis, Vol. 20, No. 3, 2000, 159-166
피인용 문헌
- Effect of stamping load variation on deformation behaviour of stainless steel thin plate with microchannel vol.227, pp.8, 2013, https://doi.org/10.1177/0954405412462673
- Forming of Metallic Bipolar Plates by Dynamic Loading vol.21, pp.1, 2012, https://doi.org/10.5228/KSTP.2012.21.1.5
- 진공 다이캐스팅 공법의 사출조건에 따른 연료전지용 분리판 성형 해석 및 제조 공정 vol.31, pp.5, 2011, https://doi.org/10.7777/jkfs.2011.31.5.274
- 금형 충전 해석을 이용한 연료전지 분리판 진공 다이캐스팅 금형 설계 방안 및 실험 검증 vol.32, pp.2, 2011, https://doi.org/10.7777/jkfs.2012.32.2.065
- Layout Design and Die Casting Using CAE Simulation for Household Appliances vol.11, pp.21, 2011, https://doi.org/10.3390/app112110128