DOI QR코드

DOI QR Code

The Measurement and Investigation of Fire and Explosion Properties for Cyclohexane

사이클로헥산의 화재 및 폭발 특성치의 측정 및 고찰

  • Ha, Dong-Myeong (Department of Occupational Health and Safety Engineering, Semyung University)
  • 하동명 (세명대학교 보건안전공학과)
  • Received : 2011.01.24
  • Accepted : 2011.04.07
  • Published : 2011.04.30

Abstract

For the safe handling of cyclohexane, the explosion limit at $25^{\circ}C$ and the temperature dependence of the explosion limits were investigated. Flash point and AIT(autoignition temperature) for cyclohexane were experimented. By using the literatures data, the lower and upper explosion limits of cyclohexane recommended 1.0 Vol% and 9.0 Vol%, respectively. Moreover lower flash points of cyclohexane recommended $-20^{\circ}C$. It was measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for cyclohexane, and the experimental AIT was $255^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of cyclohexane is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

사이클로헥산의 안전한 취급을 위해서 $25^{\circ}C$에서 폭발한계와 폭발한계 온도의존성 그리고 하부인화점을 고찰하였다. 또한 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 노말헵탄의 폭발하한계는 1.0 Vol%, 상한계는 9.0 Vol%를 추천하였고, 하부인화점은 $-20^{\circ}C$를 추천하였다. ASTM E659-78 장치를 사용하여 발화온도와 발화지연시간을 측정하였고, 여기서 측정된 최소자연발화온도는 $255^{\circ}C$였다. 그리고 노말헵탄의 새로운 폭발한계 온도의존식을 제시하였으며, 제시된 식은 문헌값과 일치하였다.

Keywords

References

  1. Meyer, E., "Chemistry of Hazardous Materials", 2nd ed., Prentice-Hall, (1990)
  2. Kline, A.A., C.R. Szydlik, T.N. Rogers and M.E. Mullins, "An Overview of Compiling, Critically Evaluating, and Delivering Reliable Property Data AIChE DIPPER Project 911 and 912", Fluid Phase Equilibria, 150-151, 421-428, (1998) https://doi.org/10.1016/S0378-3812(98)00342-2
  3. Albahri, T.A., "Flammability Characteristics of Pure Hydrocarbons", Chemical Engineering Science, 58, 3629-3641, (2003) https://doi.org/10.1016/S0009-2509(03)00251-3
  4. Britton, L.G., "Two Hundred Years of Flammable Limits", Process Safety Progress, 12(10), 1-11, (2002)
  5. Ha, D.M., "The Compatibility of MSDS through the Investigation of the Combustible Properties for MEK", J. of the Korean Society of Safety, 23(3), 36-41, (2008)
  6. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, NFPA, (1991)
  7. SFPE, "SFPE Handbook of Fire Protection Engineering", 2nd ed., SFPE, (1995)
  8. Babrauskas, V., "Ignition Handbook", Fire Science Publishers, SFPE, (2003)
  9. Stephenson, S.M., "Flash Points of Organic and Organometallic Compounds", Elsevier, (1987)
  10. Lenga R.E. and K. L. Votoupal, "The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III", Sigma Chemical Company and Aldrich Chemical Company Inc., (1993)
  11. Lide, D.R., "CRC Handbook of Chemistry and Physics", 75th ed., CRC Press, (1994)
  12. Dean, J.A., "Lange's handbook of Chemistry", 14th ed. McGraw-Hill, (1992)
  13. Lees, F.P., "Loss Prevention in the Process Industries", Vol. 2, 2nd ed., Butterworth-Heinemann, (1996)
  14. 柳生昭三, "蒸氣の爆發限界", 安全工學協會, (1979)
  15. Zabetakis, G.M., "Flammability Characteristics of Combustible Gases and Vapors", US Bureau of Mines, Bulletin, (1965)
  16. Hustad J.E. and O.K. Sonju, "Experimental Studies of Lower Flammability Limits of Gases and Mixtures of Gases at Elevated Temperature", Combustion and Flame, 71, 283-294, (1988) https://doi.org/10.1016/0010-2180(88)90064-8
  17. Ha, D.M., "Prediction of Temperature Dependence of Lower Explosive Limits for Paraffinic Hydrocarbons", J. of the Korean Institute for Industrial Safety, 15(3), 71-77, (2000)
  18. Flick, E.W., " Industrial Solvent Handbook", 3rd. Ed., Noyes, Data Corp., Prak Ridge, New Jersey, (1985)
  19. Smyth, K.C. and N.P. Bryner, "Short-Duration Autoignition Temperature Measurement for Hydrocarbon Fuels Near Heated Metal Surfaces", Combustion Sci. and Tech., 126, 225-253, (1997) https://doi.org/10.1080/00102209708935675
  20. Sheldon, M., "Understanding Auto-ignition Temperature", Fire Engineering J., June, 27-32, (1984)
  21. Zabetakis, M.G., A.L. Furno and G.W. Jones, " Minimum Spontaneous Ignition Temperature of Combustibles in Air", Industrial and Engineering Chemistry, 46(10), 2173-2178, (1954) https://doi.org/10.1021/ie50538a047
  22. Hilado, C.J. and S.W. Clark, "Autoignition Temperature of Organic Chemicals", Chemica Engineering, 4, 75-80, (1972)
  23. Gmehing, J., U. Onken and W. Arlt, "Vapor-Liquid Equilibrium Data Collection", 1, Part1-Part7, DECHEMA, (1980)
  24. Zabetakis, M.G., G.S. Scott and G.W. Jones, "Limits of Flammability of Paraffin Hydrocarbons in Air", Industrial and Engineering Chemistry, 43(9), 2120-2124, (1951) https://doi.org/10.1021/ie50501a041
  25. Semenov, N.N., "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J., (1959)

Cited by

  1. Risk Assessment by Means of Measurement of Combustible Characteristics for n-Nonanol vol.26, pp.2, 2012, https://doi.org/10.7731/KIFSE.2012.26.2.084