Abstract
Three dimensional modeling for seafloor topography is essential to monitoring displacements in underwater structures as well as all sorts of disasters along the shore. MBES is a system that is capable of high-density water depth measurement for seafloor topography and is in broad uses for gathering 3D data and detecting displacements. MBES data, however, contain random errors that take place in the equipment offset and surveying process and require systematic researches on the correction of wrong depth measurements. Thus this study set out to propose a post-processing technique to eliminate an array of random errors taking place after equipment offset correction and basic noise correction in the MBES system and analyze its applicability to seafloor topography modeling by applying it to the subject area.
해저지형을 대상으로 한 3차원 모델링은 연안에서 발생하는 각종 재해와 해중 구조물에 대한 변위탐지 모니터링을 위해 반드시 필요하다. MBES는 해저지형에 대한 고밀도 수심측량이 가능한 시스템으로서 3차원 자료 구축이나 변위탐지 등에 폭넓게 활용되고 있다. 그러나 MBES 자료에는 장비 옵셋과 측량과정에 발생한 랜덤 오류를 포함하고 있어 오측심 자료의 보정에 대한 체계적 연구가 필요하다. 따라서 이 연구에서는 MBES 시스템의 장비 옵셋 보정 및 기본적인 노이즈 보정 후에 발생하는 다양한 랜덤 오류를 제거하기 위한 후처리 기법을 제안하고자 한다. 또한 연구지역에 적용하여 해저지형 모델링에의 적용 가능성을 분석하였다.