참고문헌
- Ruschak, K. J., "Limiting Flow in a Pre-metered Coating Device," Chem. Eng. Sci., 31, 1057(1976). https://doi.org/10.1016/0009-2509(76)87026-1
- Higgins, B. G. and Scriven, L. E., "Capillary Pressure and Viscous Pressure Drop Set Bounds on Coating Bead Operability," Chem. Eng. Sci., 35, 673(1980). https://doi.org/10.1016/0009-2509(80)80018-2
- Sartor, L., Slot Coating: Fluid Mechanics and Die Design. PhD Thesis, University of Minnesota(1990).
- Gates, I. A., Slot Coating Flows: Feasibility, Quality. PhD Thesis, University of Minnesota(1999).
- Lee, K. Y., Liu, L. D. and Liu, T. J., "Minimum Wet Thickness in Extrusion Slot Coating," Chem. Eng. Sci., 47, 1703(1992). https://doi.org/10.1016/0009-2509(92)85018-7
- Carvalho, M. S. and Khesghi, H. S., "Low-flow Limit in Slot Coating: Theory and Experiments," AIChE J., 46, 1907(2000). https://doi.org/10.1002/aic.690461003
- Ning, C. Y., Tsai, C. C. and Liu, T. J., "The Effect of Polymer Additives on Extrusion Slot Coating," Chem. Eng. Sci., 51, 3289 (1996). https://doi.org/10.1016/0009-2509(95)00396-7
- Yang, C. K., Wong, D. S. and Liu, T. J., "The Effects of Polymer Additives on the Operating Windows of Slot Coating," Polym. Eng. Sci., 44, 1970(2004). https://doi.org/10.1002/pen.20200
- Romero, O. J., Suszynski, W. J., Scriven, L. E. and Carvalho, M. S., "Low-flow Limit in Slot Coating of Dilute Solutions of High Molecular Weight Polymer," J. Non-Newtonian Fluid Mech., 118, 137(2004). https://doi.org/10.1016/j.jnnfm.2004.03.004
- Carley, J. F., "Flow of Melts in 'Crosshead'-slit Dies: Criteria for Die Design," J. Appl. Phys., 9, 1118(1954).
- Pearson, J. R. A., "Non-Newtonian Flow and Die Design," Trans. J. Plastics Inst., 32, 239(1964).
- McKelvey, J. M. and Ito, K., "Uniformity of Flow From Sheeting Dies," Polym. Eng. Sci., 11, 258(1971). https://doi.org/10.1002/pen.760110314
- Matsubara, Y., "Geometry Design of a Coat-Hanger Die with Uniform Flow Rate and Residence Time Across the Die Width," Polym. Eng. Sci., 19, 169(1979). https://doi.org/10.1002/pen.760190302
- Lee, K. Y. and Liu, L. D., "Design and Analysis of a Dual-cavity Coat-hanger Die," Polym. Eng. Sci., 29, 15(1989).
- Tadmor, Z., Broyer, E. and Gutfinger, C., "Flow Analysis Network (FAN) Method for Solving Flow Problems in Polymer Processing," Polym. Eng. Sci., 14, 660(1974). https://doi.org/10.1002/pen.760140913
- Wang, Y., "Extrusion of Rubber Compounds and Highly Filled Thermoplastics through Coathanger Dies," Int. Polym. Proc., 6, 311 (1991). https://doi.org/10.3139/217.910311
- Fluent 6.2 User's Guide, Fluent Inc.
피인용 문헌
- Effect of shim configuration on flow dynamics and operability windows in stripe slot coating process vol.11, pp.1, 2014, https://doi.org/10.1007/s11998-013-9485-3
- Effect of shim configuration on internal die flows for non-Newtonian coating liquids in slot coating process vol.28, pp.2, 2016, https://doi.org/10.1007/s13367-016-0015-6
- Numerical analysis of pulsatile flows in a slot-die manifold pp.1935-3804, 2019, https://doi.org/10.1007/s11998-019-00190-w
- 컴퓨터 해석을 통한 Slot 코팅공정에서 운전방향의 코팅품질 평가 및 다이 설계 vol.48, pp.4, 2011, https://doi.org/10.7473/ec.2013.48.4.282
- 굴곡 융착면을 이용한 고밀도폴리에틸렌 관의 버트 융착 공정에서의 열유체 거동 수치모사 vol.55, pp.4, 2017, https://doi.org/10.9713/kcer.2017.55.4.561
- Optimal Slit Nozzle Design for Uniformity Coating in Display Module Lamination vol.677, pp.1, 2011, https://doi.org/10.1080/15421406.2019.1597510
- Simultaneous Analysis of Die Internal and External Flows in Slot Coating Process vol.52, pp.3, 2019, https://doi.org/10.1252/jcej.17we313