DOI QR코드

DOI QR Code

사각용기의 슬로싱 유동에 관한 연구

Study of Sloshing Flow in a Rectangular Tank

  • 지영무 (한국과학기술원 기계공학과) ;
  • 신영섭 (한라대학교 컴퓨터 응용 설계학과) ;
  • 박준상 (한라대학교 기계공학과) ;
  • 현재민 (한국과학기술원 기계공학과)
  • Ji, Young-Moo (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Shin, Young-Seop (Dept. of Computer Aided Design, Halla Univ.) ;
  • Park, Jun-Sang (Dept. of Mechanical Engineering, Halla Univ.) ;
  • Hyun, Jae-Min (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2010.12.20
  • 심사 : 2011.03.30
  • 발행 : 2011.06.01

초록

본 연구에서는 사각용기 내에서의 자유표면을 갖는 2차원 슬로싱 문제에 대하여 고찰하였다. 용기 내부의 유동은 수평방향의 조화운동을 통해 형성되며, 외부 가진 속도는 u=Asin($2{\pi}ft$)으로 정의 된다. 여기서 u, A�� 그리고 f는 외부로부터 작용하는 가진 속도, 변위 그리고 주파수를 각각 나타낸다. 큰 변위(A~O(1)) 슬로싱 문제의 해석을 위한 실험설비를 구축하였으며, 광범위한 영역에서의 PIV실험을 수행하였다. 실험을 통해 자유표면의 움직임(motion)을 각각 서로 다른 물리적 특성을 갖는 세 가지; 선형 슬로싱의 자유표면의 움직임과 유사한 standing wave motion, 사각용기의 속도가 0을 지나는 순간(the moment of turn-over) 측벽에서 발생하는 run-up motion 그리고 측벽으로부터 내부유체로 점차적으로 전파되는 bore motion으로 분류하였다.

The two-dimensional sloshing problem in a rigid rectangular tank with a free surface is considered. The flow is generated by a container in harmonic motion in time along the horizontal axis, i.e., a container excited by u=Asin($2{\pi}ft$) where u denotes the container velocity imposed externally, A is the amplitude of the oscillation velocity, and f is the frequency of oscillation. Experimental apparatus is arranged to investigate the large-amplitude sloshing flows in off-resonant conditions, where the large amplitude means that A~O(1), and the distance, S, is comparable to the breadth, L, of the container, i.e., L/S~O(1). Comprehensive particle image velocimetry (PIV) data are obtained, which show that the flow physics of the nonlinear off-resonant sloshing problem can be characterized into three peculiar free surface motions: standing-wave motions similar to those of linear sloshing, a run-up phenomenon along the vertical sidewall at the moment of turn-over of the container, and gradually propagating bore motion from the sidewall to the interior fluid region, like a hydraulic jump.

키워드

참고문헌

  1. Faltinsen, O. M., 1978, "A Numerical Nonlinear Method of Sloshing in Tanks with Two Dimensional Flow," J. Ship Res., Vol. 22, No. 3, pp. 193-202.
  2. Faltinsen, O. M. and Timokha, A. N., 2001, "Adaptive Multimodal Approach to Nonlinear Sloshing in a Rectangular Tank," J. Fluid Mech., Vol. 432, pp. 167-200.
  3. Hill, D. F., 2003, "Transient and Steady State Amplitude of Forced Waves in Rectangular Basins," Phys. Fluid, Vol. 15, No. 6, pp. 1576-1587. https://doi.org/10.1063/1.1569917
  4. Verhagen, H. G. and Wijingaarden, L., 1965, "Non-Linear Oscillation of Fluid in a Container," J. Fluid Mech., Vol. 22, No. 4, pp. 737-751. https://doi.org/10.1017/S0022112065001118
  5. Okamoto, T. and Kawahara, M., 1990, "Two Dimensional Sloshing Analysis by Lagrangian Finite Element Method," Int. J. Numer. Method Fluid, Vol. 11, No. 5, pp. 453-477. https://doi.org/10.1002/fld.1650110502
  6. Akyildiz, H. and Unal, E., 2005, "Experimental Investigation of Pressure Distribution on a Rectangular Tank Due to the Liquid Sloshing," Ocean Eng., Vol. 32, No. 11, pp. 1503-1516. https://doi.org/10.1016/j.oceaneng.2004.11.006
  7. Solaas, F. and Faltinsen, O. M., 1997, "Combined Numerical and Analytic Solution for Sloshing in Two-Dimensional Tanks of General Shape," J. Ship Res., Vol. 41, No. 2, pp. 118-129.
  8. Chen, B. F. and Nokes, R., 2005, "Time-Independent Finite Difference Analysis of Fully Non-Linear and Viscous Fluid Sloshing in a Rectangular Tank," J. Comput. Phys., Vol. 209, No. 1, pp. 47-81. https://doi.org/10.1016/j.jcp.2005.03.006
  9. Wu, G. X., Ma, Q. M. and Taylor, R. E., 1998, "Numerical Simulation of Sloshing Waves in a 3D Tank Based on a Finite Element Method," Appl. Ocean Res., Vol. 20, No. 6, pp. 337-355. https://doi.org/10.1016/S0141-1187(98)00030-3
  10. Benjamin, T. B. and Feir, J. E., 1967, "The Disintegration of Wave Trains on Deep Water. Part 1. Theory," J. Fluid Mech., Vol.27, pp. 417-430. https://doi.org/10.1017/S002211206700045X

피인용 문헌

  1. Die design of large spherical curvature hot forming process for improving the dimensional accuracy vol.30, pp.9, 2016, https://doi.org/10.1007/s12206-016-0846-6