DOI QR코드

DOI QR Code

FEM 시뮬레이션을 이용한 2MVA 몰드변압기 권선간 써지전압 분배 해석 기법 연구

A Surge Voltage Distribution Analysis of 2MVA Cast Resin Transformer Winding with FEM Simulation

  • 장형택 (홍익대학교 대학원 전기공학과) ;
  • 신판석 (홍익대학교 전기공학과)
  • 투고 : 2010.08.09
  • 심사 : 2011.02.24
  • 발행 : 2011.05.31

초록

This paper presents an analyzing method of the capacitance of the power transformer for initial voltage distribution and insulation design. When a high incoming surge voltage is accidently occurred in windings of transformer, it does not distribute equally in the windings. This phenomenon makes electric field concentration and the insulating material could be break. Initial voltage distribute mostly depends on capacitances between winding to winding or winding to core in the transformer. If the C network can be structuralized into the equivalent circuit model and be calculated each capacitance element value by circuit analysis and FEM(Finite Element Method) simulation program, the transformer designer could know the place where the structure is to be modified or the insulation to be reinforced. This method quickly provides the data of the voltage distribution in each winding to the designer.

키워드

참고문헌

  1. 고인석 외 227인, “한국전력40년사”, 한국전력공사, (2001).
  2. 지식경제부, “30MVA급 배전용 몰드 변압기의 컴팩트화및 고효율화를 위한 기반기술 연구”, 2차년도 보고서 2009.
  3. 주)효성자료실, “몰드변압기 일반, 변압기 시험 종류 및 방법”.
  4. S.V.Kulkarni, S.A.Khaparde, “Transformer Engineering”, MARCEL DEKKER, INC, p.169-170, p.277-325, (2004).
  5. Robert M. DelVecchio, Bertrand Poulin, Pierre T. Feghali, Dilipkumar M.Shah, and Rajendra Ahuja, “Transformer design principles”, CRC PRESS, p237-284,(2002).
  6. Allan Greenwood, “Electrical Transients in Power Systems”, Wiley Interscience, p509-514.
  7. J & P Transformer Book (Twelfth Editon)”, NEWNES, p487-491,(1998).