Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

State of Art for Biaxial Tensile Test Systems

2축 인장 시험 방법에 관한 고찰

  • Received : 2010.12.17
  • Accepted : 2011.05.03
  • Published : 2011.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is a review of biaxial tensile test equipments and specimens. The stresses acting on a component in service are multiaxial in nature. Therefore, it is necessary to consider the mechanical properties of sheet materials not only under uniaxial but also under these multiaxial stress states. Biaxial testing of metal in industry becomes an important investigation tool for the evaluation of mechanical properties of sheet metals. In this paper, several types of biaxial tensile tests were reviewed, and their advantages and limitations were discussed.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. W. Klaus, J. Gerlach, 1998, Biaxial Experimental Approach to Characterize Formability of Steel Sheet Metals, Soc. Auto. Eng., pp. 69-75.
  2. H. Shin, J. Park, C. Park, Y. Kim, 2009, Study on the yield locus of aluminum alloy sheet using biaxial cruciform specimens, Trans. Mater. Process., Vol. 18, pp 416-421. https://doi.org/10.5228/KSPP.2009.18.5.416
  3. J. Park, J. Kim, N. Park, Y. Kim, 2010, Study of forming limit for rotational incremental sheet forming of magnesium alloy sheet, Metal. and Mater. Trans. A, Vol. 41A, pp. 97-105.
  4. A. Makinde, L. Thibodeau, K. W. Neale, 1992, Development of an apparatus for biaxial testing for cruciform specimens, Exp. Mech., Vol. 32, pp. 138-144. https://doi.org/10.1007/BF02324725
  5. S. B. Lin, J. L. Ding, 1995, Experimental study of the plastic yielding of rolled sheet metals with the cruciform plate specimen, Int. J. Plasticity, Vol. 11, pp. 583-604. https://doi.org/10.1016/S0749-6419(94)00024-7
  6. T. Kuwabara, S. Ikeda, K. Kuroda, 1998, Measurement and analysis of differential work hardening in cold rolled steel sheet under biaxial tension, J. Mater. Proc. Technol. Vol. 80-81, pp. 517-523. https://doi.org/10.1016/S0924-0136(98)00155-1
  7. J. S. Welsh, D. F. Adams, 2002, An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens, Composites: Part A 33 (6), pp. 829-839. https://doi.org/10.1016/S1359-835X(01)00142-7
  8. G. Ferron, A. Makinde, 1988, Design and development of a biaxial strength testing device, J. Test. Eval., Vol. 16, pp. 253-256. https://doi.org/10.1520/JTE10375J
  9. Fraunhofer, 2005. Dynamic material testing(http://www.emi.fraunhofer.de).
  10. M. Geiger, W. Hubnatter, M. Merklein, 2005, Specimen for a novel concept of the biaxial tension test, Mater. Process. Technol., Vol. 167, pp. 177-183. https://doi.org/10.1016/j.jmatprotec.2005.05.028
  11. K. J. Pascoe, J. W. R. de Villiers, 1967, Low-Cycle Fatigue of Steels Under Biaxial Straining, J. Strain Anal., Vol. 2, pp. 117-126. https://doi.org/10.1243/03093247V022117
  12. L. H. Wilson, D. Z. White, 1971, Cruciform specimens for Biaxial Fatigue Tests: An Investigation Using Finite Element Analysis and Photoelastic-Coating Techniques, J. Strain Anal., Vol. 6, pp. 27-37. https://doi.org/10.1243/03093247V061027
  13. Y. Ohtake, S. Rokugawa, H. Masumoto, 1999, Geometry determination of cruciform type specimen and biaxial tensile test of C/C composites, Key Eng. Mater., Vol. 3, pp. 151-154.
  14. F. Abu-Farha, L.G Hector, Jr., M. Khraisheh, 2001, Cruciform-Shaped Specimens for Elevated Temperature Biaxial Testing of Lightweight Materials, JOM, Vol. 61, pp. 48-56.
  15. J. Gozzi, 2004, Plastic behavior of steel, Ph. D. Thesis of Lulea Univ. of Tech.
  16. J. Park, Y. Kim, B. You, T. Kuwabara, 2005, Plastic deformation characteristic of AZ31 magnesium alloy sheets, Trans. Mater. Process., Vol. 14, pp 520-526. https://doi.org/10.5228/KSPP.2005.14.6.520
  17. J. Park, N. Park, Y. Kim, 2010, Plastic deformation characteristics and evaluation of press formability for Ti-6Al-4V sheet at warm temperature, Mat. Sci. For., Vol. 654-656, pp. 875-878.
  18. O. Cazucu, B. Plunkett, F. Barlat, 2006, Orthotropic yield criterion for hexagonal closed packed metals, Int. J. Plastic., Vol. 22, pp. 1171-1194. https://doi.org/10.1016/j.ijplas.2005.06.001
  19. M. Ishiki, T. Kuwabara, Y. Hayashida, 2009, Analysis of differential work hardening behavior of pure titanium sheet using spline function, Int. J. Mater. Form., Vol. 2, pp. 69-72.
  20. I. Zidane, D. Guines, L. Leontoing, E. Ragneau, 2010, Development of an in-plane biaxial test for forming limit curve(FLC) characterization of metallic sheets, Meas. Sci. Technol., Vol. 21, pp. 1-11.

Cited by

  1. Evaluation of the plastic yield locus for embossed sheet using biaxial tensile tests vol.22, pp.6, 2016, https://doi.org/10.1007/s12540-016-6173-8