참고문헌
- S. C. Heo, Y. H. Seo, T. W. Ku, J. Kim, B. S. Kang, 2009, Study on application of flexible die to sheet metal forming process, Trans. Mater. Process., Vol. 18, No. 7, pp. 556-564. https://doi.org/10.5228/KSPP.2009.18.7.556
- S. C. Heo, Y. H. Seo, J. W. Park, T. W. Ku, J. Kim, B. S. Kang, 2008, Numerical and experimental study on plate forming process using flexible die, Trans. Mater. Process., Vol. 17, No. 8, pp. 570-578. https://doi.org/10.5228/KSPP.2008.17.8.570
- Y. H. Seo, S. C. Heo, J. W. Park, T. W. Ku, W. J. Song, J. Kim, B. S. Kang, 2010, Development of stretch forming apparatus using flexible die, Trans. Mater. Process., Vol. 19, No. 1, pp. 17-24. https://doi.org/10.5228/KSPP.2010.19.1.017
- Z. Y. Cai, S. H. Wang, X. D. Xu, M. Z. Li, 2009, Numerical simulation for the multi-point stretch forming process of sheet metal, J. Mater. Process. Technol., Vol. 209, pp. 396-407. https://doi.org/10.1016/j.jmatprotec.2008.02.010
- K. A. Pasch, 1981, Design of a discrete die surface for sheet metal forming, S.B. Theis, Department of Mechanical Engineering, Massachusetts Institute of Technology.
- M. Z. Li, Y. H. Liu, S. Z. Su, G. Q. Li, 1999, Multi point forming: a flexible manufacturing method for a 3-D surface sheet, J. Mater. Process. Technol., Vol. 87, Issues 1-3, pp. 277-280. https://doi.org/10.1016/S0924-0136(98)00364-1
- L. Li, Y. H. Seo, S. C. Heo, B. S. Knag, J. Kim, 2010, Numerical simulations on reducing the unloading springback with multi-step multi-point forming technology, Int. J. Adv. Manuf. Technol., Vol. 48, pp. 45-61. https://doi.org/10.1007/s00170-009-2290-6
피인용 문헌
- Numerical and Experimental Study for Improvement of Formability in Flexible Forming Process vol.21, pp.7, 2012, https://doi.org/10.5228/KSTP.2012.21.7.432
- Compensation for Elastic Recovery in a Flexible Forming Process Using Predictive Models for Shape Error vol.21, pp.8, 2012, https://doi.org/10.5228/KSTP.2012.21.8.479