References
- Jang, W. W., Song, Y. K. and Kim, K. H., 1994, A study on the TXV characteristics for automotive air conditioning system using HFC-l34a, Proceedings of SAREK winter conference, pp. 100-106 .
- Park, S. H. and Kang, W., 1997, Development of block type expansion valve in the automotive air conditioning system, Proceedings of SAREK summer conference, pp. 771-776.
- Lee, S. H., Kim, B. H. and Kim, K. H., 1998, The analysis of orifice flow in block type expansion valve of automotive air conditioning system, Proceedings of SAREK summer conference, pp. 1189-1193.
- Park, B. S. and Han, C. S., 1999, Development of program for TXV and capillary tube performance simulation, Proceedings of SAREK summer conference, pp. 1060-1070.
- Monforte, R., 2001, Identification' of the numerical model for an automotive application thermostatic expansion valve, SAE, Paper No. 2001-01-1700.
- Lee, D. W. and Yoo, S. Y., 2002, A study on the component performance for automotive air conditioning, Transactions of SAREK, Vol. 14, No.4, pp. 293-302.
-
Kim, M. G., Kim, O. J. and Kim, Y. J., 2003, Numerical study on the effect of expansion device in
$CO_{2}$ cycle, Proceedings of SAREK summer conference, pp. 626-631. - Si, J. M., Cho, Y. D. and Han, C. S., 2003, The prediction of vehicle A/C system performance by changing TXV, Proceedings of SAREK summer conference, pp. 642-650.
- Kim, K. H., Park, S. H. and Kang, W., 2003, A design of the block type expansion valve in automotive air conditioning system using HFC- 134a, Transactions of KSAE, Vol. 11, No.4, pp. 196-203.
- Monforte, R., 2003, An improved numerical model for thermostatic expansion valve used in automotive air conditioning systems, SAE, Paper No. 2003-01-0739.
- Choi, J. M., Kim, Y. C., Kwak, J. S., and K won, B. C., 2004, A generalized flow model and flow charts for predicting mass flow rate through short tube orifices, Transactions of SAREK, Vol. 16, No. 20, pp. 895-900.
- Choi, J. M. and Kim, Y. C., 2005, Performance of short tube orifices using R410A near the critical region, Transactions of SAREK, Vol. 17, No. 12, pp. 1106-1112.
- Han, D. W. and lung, S. W., 2006, A study on the possibility for the replacement of a thermal expansion valve to an electronic expansion valve, Proceedings of SAREK summer conference, pp. 695-700.
- Park, C. S., Lee, S. I., Kim, Y. C., and Lee, Y. S., 2006, Mass flow characteristics and empirical modeling of R22 flowing through electronic expansion valve, Transactions of SAREK, Vol. 18, No. 11, pp. 881-887.
-
Hwang, Y. W. and Kim, O. J., 2007, Experimental study on the
$CO_{2}$ flow through electronic expansion valves, Proceedings of SAREK summer conference, pp. 1237-1241. - Cengel, Y. A. and Cimbala, J. M., 2006, Fluid Mechanics, McGraw-Hill, New York, chap. 7 and chap. 8.