참고문헌
- M. Seggiani, "Modelling and Simulation of Time Varying Slag Flow in a Prenflo Entrainedflow Gasifier", Fuel, Vol. 77, No. 14, 1998, pp. 1611-1621. https://doi.org/10.1016/S0016-2361(98)00075-1
- P. J. Benyon, "Computational modeling of entrained flow slagging gasifiers", University of Sydney, 2002.
- M. J. Bockelie, M. K. Denison, Z. Chen, T. L. Linjewile, C. L. Senior, and A. F. Sarofim, "CFD modeling for entrained flow gasifiers in vision 21 systems", Proceedings of the 19th annual international Pittsburgh coal conference, 2002.
- S. Z. Yong, M. Gazzino, and A. Ghoniem, "Modeling the slag layer in solid fuel gasification and combustion - Formulation and sensitivity analysis", Fuel, 2011, available on-line.
- S. Liu and Y. Hao, "Numerical study on slag flow in an entrained-flow gasifier", Proceedings of International Mechanical Engineering Congress and Exposition, Seattle, 2007.
- J. Ni, Z. Zhou, G. Yu, Q. Liang, and F. Wang, "Molten slag flow and phase transformation behaviors in a slagging entrained-flow coal gasifier", Ind. Eng. Chem. Res., Vol. 49, No. 23, 2010, pp. 12302-12310. https://doi.org/10.1021/ie1013844
- 이중원, 김미영, 지준화, 김시문, 박세익, "석탄 가스화 공정 모델링에 관한 연구", 한국수소 및 신에너지학회 논문집, Vol. 21, No. 5, 2010, pp. 425-434.
- 송지훈, 강민웅, 서동균, 임성진, 백민수, 황정호, "300MW급 Shell형 1단 분류층 석탄 가스화기의 전산수치해석: 산소/스팀/석탄 주입비, 석탄입자 크기, 주입 노즐 각도가 가스화기 성능에 미치는 영향", 한국수소 및 신에너지학회논문집, Vol. 21, No. 3, 2010, pp. 227-240.
- 지준화, 오민, 김시문, 김미영, 이중원, 김의식, "석탄 가스화 반응의 동적 거동 전산모사", 한국수소 및 신에너지학회 논문집, Vol. 22, No.3, 2011, pp. 623-630.
- 박윤경, 오명숙, "환원 조건에서 석탄 슬래그의 Tcv 예측", 화학공학, Vol. 44, No. 6, 2006, pp. 623-630.
- 구자형, 백민수, 유정석, 김봉근, 김유석, 이황직, "300MW IGCC 가스화플랜트의 가스화성능 및 Slag System 용량 예측", 한국신재생에너지학회 2008년도 추계학슬대회논문집, 2008, pp. 234-237.
- M. E. Rodgers, "Slag layers in coal-fired MHD generators", Ph.D Thesis, Stanford University, 1978.
- K. C. Mills and J. M. Rhine, "The measurements and estimation of the physical properties of slags formed during coal gasification: 1. Properties relevant to fluid flow", Fuel, Vol. 68, 1989, pp. 193-200. https://doi.org/10.1016/0016-2361(89)90322-0
- K. C. Mills and J. M. Rhine, "The measurements and estimation of the physical properties of slags formed during coal gasification: 2. Properties relevant to heat transfer", Fuel, Vol. 68, 1989, pp. 904-910. https://doi.org/10.1016/0016-2361(89)90128-2
- S. Vargas, F. J. Frandsen, and K. Dam- Johansen, "Rheological properties of hightemperature melts of coal ashes and other silicates", Progress in Energy and Combustion Science, 27, 2001, pp. 273-429.
- W. T. Reid and P. Cohen, "The flow characteristics of coal-ash slags in the solidification range", Trans. ASME, Vol. 66, 1944, pp. 83-97.
- R. B. Bird, W. E. Stewart, and E. N. Lightfoot, "Transport Phenomena", John Wiley, 1960.
- B. Li, A. Brink, and M. Hupa, "Simplified model for determining local heat flux boundary conditions for slagging wall", Energy & Fuels, Vol. 23, 2009, pp. 3418-3422. https://doi.org/10.1021/ef800957k