Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis on the Thermal Characteristics of a Magnetron Structure

마그네트론 구조의 열특성에 관한 해석

  • Koh, Byung-Kab (Department of Mechanical Engineering, Inha Technical College)
  • 고병갑 (인하공업전문대학 기계과)
  • Received : 2011.02.07
  • Accepted : 2011.03.10
  • Published : 2011.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Magnetron is applied in microwave ovens for generating microwaves. It is composed of r-fin, yoke, A/F seals, gasket base, filter box. The temperature is occurred highly, when magnetron operate in its systems. Therefore the thermal characteristics must be considered in the design of magnetron. Because of its geometric complex, it is difficult to analysis the thermal characteristics. In this paper, temperature analysis is performed for all components. The commercial software ANSYS is used to consider both conduction and convection. The analysis is carried out by adding each component. An experiment on the thermal characteristics is performed to verify the reliability for simulation.

마그네트론은 마이크로파를 발진하기 위한 부품으로써 전자레인지 등에 사용되는 부품이다. 이러한 마그네트론은 열이 많이 발생하며, 따라서 열특성을 고려한 방열 설계가 반드시 수반되어야 한다. 본 연구에서는 마그네트론을 구성하는 부품에 대하여 열전달 해석을 수행하여 마그네트론의 열특성을 파악하였다. 이를 위하여 상용 소프트웨어인 ANSYS를 이용하여 전도 및 대류를 고려한 열전달 해석을 수행하였다. 마그네트론 부품을 하나씩 추가하면서 해석을 수행하였고 각각의 해석 결과를 실험 결과와 비교하였다.

Keywords

References

  1. Kim, I.S., "1st Technical report; Thermal analysis for anode in magnetron, LG electronics", 1991
  2. NISA, 1991, NISA User's Manual.
  3. Lee, S.P., Koh, B.K., and Ha, S.K., "Development and Analysis of the Magnetron Analysis Program", Journal of the Korean Society of Machine Tool Engineers, Vol. 18, No. 2, pp. 123-129, 2009
  4. Park, S. H., Kang, S. H. and Lee, S. S., 2003, "Development of Motorcycle Brake Design Aided Program for Thermal Analysis," Transactions of the Korean Society of Machine and Tool Engineers, Vol. 12, No. 1, pp. 101-110.
  5. Boley, B. A. and Weiner, J. H., 1962, Theory of Thermal Stresses, John Wiley & Sons, pp. 135-141.
  6. Hsu, T. R., 1986, The Finite Element Method in Thermodynamics, Allen & Unwin, Boston, pp. 23-26.
  7. Kim, Y. G., Kim, S. T. and Park, C. H., 1997, "Analysis on the Thermal Characteristics of Spindle of a High Precision Lathe," Transactions of the Korean Society of Machine and Tool Engineers, Vol. 6, No. 3, pp. 44-51.
  8. Yoh, E. G., Lee, Y. S. and Kim, Y. R, 1997, "The Thermal-Elastic Analysis of Die Deformation for Forging Processes and Study of Brittle Damage," Proceedings of the KSMTE Spring Conference 1997, pp. 164-169.
  9. ANSYS, ANSYS User's Manual Ver. 10.0., 2005
  10. Toshiba Hokuto Electronics Corporation, www.hokuto.co.jp/00end/e5500_sm/e5500_sm_guide.html