대한치과기공학회지 (Journal of Technologic Dentistry)

  • 제33권1호
  • /
  • Pages.55-61
  • /
  • 2011
  • /
  • 1229-3954(pISSN)
  • /
  • 2288-5218(eISSN)
대한치과기공학회 (Korean Academy of Dental Technology)
권호 표지
DOI QR코드

DOI QR Code

SLM법으로 매크로 육각다공질 구조를 부여한 치과 임플란트의 역학 분석

Mechanical Analysis of Macro-Hexagon Porous Dental Implant Using Selective Laser Melting Technique

  • 김부섭 (부산가톨릭대학교 보건과학대학 치기공학과) ;
  • 최성민 (부산가톨릭대학교 보건과학대학 치기공학과)
  • Kim, Bu-Sob (College of Health Science, Catholic University of Pusan) ;
  • Choi, Sung-Min (College of Health Science, Catholic University of Pusan)
  • 투고 : 2011.02.22
  • 심사 : 2011.03.21
  • 발행 : 2011.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.

키워드

참고문헌

  1. 강후원. CAD/CAM 및 카피밀링을 이용하여 제작한 전부도재 고정성 가공의치의 파절강도 및 변형 특성에 관한 연구. 전남대학교 대학원 치의학과, 치의학박사학위 논문, 2007.
  2. 임정열, 조진현, 조광헌. 임플란트 경부 디자인이 치밀골의 응력에 미치는 영향. 대한치과기보철학회지, 제48권, 제3호, 224-231, 2010.
  3. 임정열, 조진현, 조광헌. 임플란트 경부 미세나사 디자인이 치밀골의 스트레인에 미치는 영향. 대한치과기보철학회지, 제48권, 제3호, 215-223, 2010.
  4. 최귀현. 임플란트의 표면조도가 공융합에 미치는 영향. 경희대학교 대학원, 치의학석사학위논문, 2003.
  5. 황하준. 임플란트 표면처리에 따른 골융합의 차이. 경희대학교 대학원 치의학과, 치의학석사학위논문, 2003.
  6. Akca K, Cehreli MC. A photoelastic and straingauge analysis of interface force transmission of internal-cone implants. Int J Periodontics Restorative Dent, 28, 391-399, 2008.
  7. Bozkaya D, Muftu S, Muftu A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. J Prosthet Dent, 2, 523-530, 2004.
  8. Blatz MB. Long Term Clinical Success of All Ceramic Posterior Restorations. Quintessence Int, 33(6), 415-426, 2002.
  9. Buser D, Warrer K, Karring T, Stich H. Titanium implants with a true period- ontal ligament; An alternative to osseointegrated implants. Int J Oral Maxillofac Implants, 5, 113-116, 1990.
  10. Denissen HW, Kalk W, Nieuport HM, Maltha JC, Hoofe A. Mandibular bon response to plasma sprayed coatings of hydroxapatite. Int J Prosthodnt, 3, 55-58, 1990.
  11. Engquist B, Astrand P, Dahlgren S, Engquist E, Feldmann H, Grondahl K. Marginal bone reaction to oral implants: a prospective comparative study of Astra Tech and Branemark system implants. Clinic Oral Implants Res, 13, 30-37, 2002. https://doi.org/10.1034/j.1600-0501.2002.130103.x
  12. Gottlander M, Albrektsson T. A Histomorphometric study of unthreaded hydroxyapatite coated and titanium coated implants in rabbit bone. Int J Oral Maxillofac Implants, 7, 485-490, 1992.
  13. Gottlander M, Albrektsson T. A Histomorphometric studies of hydroxyapatite coated and uncoated CP titanium threaded implants in bone. Int J Oral Maxillofac Implants, 6, 399-404, 1991.
  14. Hobo S, Ichida E, Garcia LT. Osseointergration and Occlusal Rehabilitation. Quintessence Co, 21-32, 1989.
  15. Li JP, Wijn JR, Blitterswijk CA, Groot K. Porous Ti6Al4V scaffold directly fabricating by rapid prototyping: Preparation and in vitro experiment. Biomaterials, 27, 1223-1235, 2006. https://doi.org/10.1016/j.biomaterials.2005.08.033
  16. Oonishi H. Yamamoto M, Ishimura H. Tsuji E, Kushitani S, Aono M, Ukon Y. The Effect of Hydroxyapatite coating on Bone Growth into porous titanium alloy implants. J Bone Joint Surg, 71-B, 213-216, 1989. https://doi.org/10.1302/0301-620X.71B2.2925737
  17. Traini C. Mangano RL, Sammons F, Mangano A, Macchi AP. Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. Dental Materials, 24, 1525-1533, 2008. https://doi.org/10.1016/j.dental.2008.03.029
  18. Wen CE, Mabuchi M, Yamada Y, Shimojima K, Chino Y, Asahina T. Processing of biocompatible porous Ti and Mg. Scripta Materialia, 45, 1147-1153, 2001. https://doi.org/10.1016/S1359-6462(01)01132-0