DOI QR코드

DOI QR Code

Property of Carboxylic Polyester Powder Coatings with Different Hardeners

경화제에 따른 열경화성 분체도료의 물성 비교

  • Choi, Seung-Ok (Dong Yang Oil & Fat Co., LTD.) ;
  • Kim, Eun-Mi (Department of Engineering Chemistry, College of Engineering, Chungbuk National University) ;
  • Yoo, Jung-Hee (Department of Engineering Chemistry, College of Engineering, Chungbuk National University) ;
  • Jeong, Noh-Hee (Department of Engineering Chemistry, College of Engineering, Chungbuk National University)
  • 최성옥 ((주) 동양유지 연구소) ;
  • 김은미 (충북대학교 공과대학 공업화학과) ;
  • 유정희 (충북대학교 공과대학 공업화학과) ;
  • 정노희 (충북대학교 공과대학 공업화학과)
  • Received : 2011.09.08
  • Accepted : 2011.09.22
  • Published : 2011.09.30

Abstract

It was researched to be alternative of TGIC type hardener with human hazard element as PT 910 mix powder paint with hardener. Generally PT 910 was compared with TGIC & Epoxy resin of hardener to be used at thermosetting powder paint. We inquired a property of matter for paint through Gel time, glass transition temperature, melting point and a property of matter for film through a property of adhesion, a property of tolerance, softness, gloss, acid-resistant, alkali-resistant, salt water spray-resistant, facilitation climatic. When PT 910 is used of hardener, it was shown the excellent results in gel time, softness, salt water spray-resistant, fracilitation climatic and the similar results in melting point, a property of tolerance, a property of adhesion, gloss, acid-resistant, alkali-resistant, as compared with the powder paint used by TGIC hardener. The glass transition temperature was little low. But there was slightly different results. After the study results, we reached the conclusion that thermosetting powder used by PT 910 is alterative to by TGIC hardener.

Keywords

References

  1. Physical-Chemical Properties and Environmental Fate for Organic Chemicals. Donald Mackay, Taylor & Francis, USA (2006).
  2. Powder Coatings Chemistry and Technology. T.A. Miser. WILEY, England (1991).
  3. The Science of Powder Coatings Chemistry formulation and Application, David A, BATE BSC(Hons), UK (1994).
  4. Thechnology of Powder Coatings, S. T. HARRIS, PORTCULLIS PRESS, UK (1981).
  5. Eighth International Powder Coating Conference. OXYPLAST BELGIUM.
  6. J.H Park, Y.J Shin, "A Study on the Properties of Epoxy Based Powder Coating with Various Curing Agents.", J. of I. and Engineering Chemistry., 9 (1), 58 (1998).
  7. H.J Lim, K.H Jeong, "Study on the Compositional Construction of Epoxy Based Powder Paint.", J. of Korean Society of Clean Technology., 12 (1), 27 (2006).
  8. K.H Park, Y.S Lee, "The Effect of Thermal Decomposition of Epoxy Resin for a Variation of Hardener.", J. of Korean Oil Chemists' Society, 24 (4), 393 (2007).
  9. K.S Lee, J.H Han, "A Study on the Chemical Composition and MSDS Reliability of Powder Coatings.", J. of Korean Society of Occupational and Environmental Hygiece, 14 (3), 221 (2004).
  10. K. Okadaa, K. Yamaguchi and H. Takeda, "Acrylic/polyester hybrid powder coating system having excellent weather durability.", Progress in Organic Coatings,, 34 (1), 169 (1997) .
  11. G. Merfeld, C. Molaison, "Acid/epoxy reaction catalyst screening for low temperature (${120^{\circ}C}$) powder coatings.", J. of Progress in Organic Coatings., 52 (2), 98 (2005). https://doi.org/10.1016/j.porgcoat.2004.09.004
  12. M. Osterhold, F. Niggemann, "Viscosity- temperature behaviour of powder coatings.", J. of Progress in Organic Coatings., 33 (1), 30 (1998).
  13. M. Wulf, S. Michel, "Surface tension studies of levelling additives in powder coatings.", J. of Progress in Organic Coatings., 38 (2), 59 (2000). https://doi.org/10.1016/S0300-9440(00)00082-5
  14. D.F.Parra, L.P.Mercuri, "Thermal behavior of the epoxy and polyester powder coatings using thermogravimetry/differential thermal analysis coupled gas chromatography/mass spectrometry (TG/DTA-GC/MS) technique: identification of the degradation products.", J. of thermochimica acta., 386 (2), 143 (2002). https://doi.org/10.1016/S0040-6031(01)00809-7
  15. K. Yanagida, T. Morita, "A new powder flow control system for electrostatic powder coating: a closed-loop-control system equipped with a capacitance sensor.", J. of Electrostatics, 49 (1), 1 (2000). https://doi.org/10.1016/S0304-3886(99)00070-4
  16. S. A. Madbouly, A. F. Serag Eldin, "Effect of curing on the broadband dielectric spectroscopy of powder coating.", J. of European Polymer Journal, 43 (6), 2462 (2007). https://doi.org/10.1016/j.eurpolymj.2007.03.031
  17. F. Schmitt, A. Wenning, "Dimeric isocyanates in polyurethane powder coatings .", J. of Progress in Organic Coatings, 34 (1), 227 (1997).