Acknowledgement
Supported by : 한국연구재단
References
- Ahmed, I. and Lovell, C. W. (1993), "Rubber soils as light weight geomaterials", Transportation research record 1422. Transportation Research Board, Washington D.C., 61-70.
- American Coal Ash Association (2008), 2008 Coal combustion product (CCP) production & use survey report.
- ASTM. (2006), "Standard test method for specific gravity of soil solids by water pycnometer", ASTM D854-06e1, West Conshohoken, Pa.
- ASTM. (2009), "Standard test method for density of hydraulic cement", ASTM C188-05, West Conshohoken, Pa.
- Atkinson, J. H. (2000), "Non-linear soil stiffness in routine design", Geotechnique, 50(5), 487-508. https://doi.org/10.1680/geot.2000.50.5.487
- Aydilek, A. h., Madden, E. T., and Demirkan, M. M. (2006), "Field evaluation of a leachate collection system constructed with scrap tires", J. of. Geotech. Geoenviron. Eng., ASCE, 132(8), 990-1000. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:8(990)
- Bosscher, P. J., Edil, T. B., and Kuraoka, S. (1997), "Design of highway embankments using tire chips", J. of Geotech. Geoenviron. Eng., ASCE, 123(4), 295-304. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(295)
- Diaz-Rodriguez, J. A. and Santamarina, J. C. (2001), "Mexico City Soil Behavior at Different Strains: Observations and Physical Interpretation", J of Geotech. Geoenviron. Eng., ASCE, 127(9) 783-789. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:9(783)
- Edil, T. B. and Bosscher, P. J. (1994), "Engineering properties of tire chips and soil mixtures", Geotechincal Testing J., 17(4), 453-464. https://doi.org/10.1520/GTJ10306J
- EPA (2007), Identifying, planning, and financing beneficial use projects using dredged material-Beneficial use planning manual, EPA842-B-07-001.
- Gabr, M.A. and Bowders, J. J. (2000), "Controlled low-strength material using fly ash and AMD sludge", J. of Hazardous Materials, 76 (2-3), 251-263. https://doi.org/10.1016/S0304-3894(00)00202-8
- Garga, V. K. and O'Shaughnessy, V. (2000), "Tire-reinforced earthfill. Part 1: Construction of a test fill, performance, and retaining wall design", Can. Geotech. J., 37(1). 75-96. https://doi.org/10.1139/t99-084
- Hardin, B. O. and Richart, F. E. (1963), "Elastic wave velocities in granular soils", J. of Soil Mechanics and Foundations, ASCE, 89(1), 33-65.
- Hardin, B. O. and Drnevich, V. P. (1972), "Shear modulus and damping in soils: measurement and parameter effects", J. of Soil Mechanics and Foundations Division, ASCE, 98(6), 603-624.
- Hertz, H. (1882), "Uber die Berührung fester elastischer Korper", J. Reine angewandte matematik, 92, 156-171.
- Humphrey, D. N. and Eaton, R. A. (1995), "Field performance of tire chips as subgrade insulation for rural roads", Proc., 6th Int. Conf. on Low-Volume Roads, 2, Transportation Research Board, Washington D.C., 77-86.
- Kim, B. J. and Prezzi, M. (2008), "Evaluation of the mechanical properties of class-F fly ash", Waste Management, 28(3), 649-659. https://doi.org/10.1016/j.wasman.2007.04.006
- Kim, Y. T., Kim, H. J., and Lee, G. H. (2008), "Mechanical behavior of lightweight soil reinforced with waste fishing net", Geotextiles and Geomenbranes, 26. 512-518. https://doi.org/10.1016/j.geotexmem.2008.05.004
- Kim, Y. T., Ahn, J., Han, W. J., and Gabr, M. A. (2010), "Experimental Evaluation of Strength Characteristics of Stabilized Dredged Soil", J. of Materials in Civil Eng. ASCE, 22(5). 539-544. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000052
- Kumar, S. and Stewart, J. (2003), "Evaluation of Illinois pulverized coal combustion dry bottom ash for use in geotechnical engineering applications", J. of Energy Engineering, 129(2), 42-55. https://doi.org/10.1061/(ASCE)0733-9402(2003)129:2(42)
- Krumbein, W. C., Sloss, L. L. (1963), Stratigraphy and Sedimentation, 2nd Edition, W. H. Freeman and Company, San Francisco.
- Lee, J. S., Dodds, J., and Santamarina, J. C. (2007), "Behavior of rigid-soft particle mixtures", J. of Materials in Civil Eng., ASCE, 19(2), 179-184. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:2(179)
- Lee, C., Truong, Q. H., Lee, W., and Lee, J. S. (2010), "Characteristics of Rubber-Sand Particle Mixtures according to Size Ratio", J. of Geotech. Geoenviron. Eng., ASCE, 22(4), 323-331.
- Mindlin, R. D. (1949), "Compliamce of elastic bodies in contact", J. of applied mechanics, September, 259-268.
- Mitchell, J. K. and Soga, K. (2005), Fundamentals of soil behavior, 3rd Edition, John Wiley & Sons, New Jersey.
- Pan, J. R., Huang, C., Kuo, J. J., and Lin, S.H. (2008), "Recycling MSWI bottom and fly ash as raw materials for Portland cement", Waste Management, 28(7), 1113-1118. https://doi.org/10.1016/j.wasman.2007.04.009
- Poh, P. S. H. and Broms, B. B. (1995), "Slope stabilization using old rubber tires and geotextiles", J. of Performance of Constructed Facilities, 9(1), 76-80. https://doi.org/10.1061/(ASCE)0887-3828(1995)9:1(76)
- Ramberg, W. and Osgood, W. R. (1943), "Description of stress-strain curves by three parameters", Technical Note No. 902, National Advisory Committee for Aeronautics, Washington DC.
- Rowe, R. K. and Mclsaac, R. (2005), "Clogging of tire shreds and gravel permeated with landfill leachate", J. of Geotech. Geoenviron. Eng., ASCE, 131(6), 682-693. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:6(682)
- Rubber Manufacturers Association (2006), Scrap tire markets in the United States 2005 Edition.
- Santamarina, J. C., Klein, K. A., and Fam, M. A. (2001), Soils and Waves - Particulate Materials Behavior, Characterization and Process Monitoring. John Wiley & Sons. New York.
- Singh, S. P., Tripathy, D. P., and Ranjith, P. G. (2008), "Performance evaluation of cement stabilized fly ash-GBFS mixes as a highway construction material", Waste Management, 28(8), 1331-1337. https://doi.org/10.1016/j.wasman.2007.09.017
- Tsuchida, T., Takeuchi, D., Okumura, T., and Kishida, T. (1996), "Development of lightweight fill from dredging", Proc. of Environmental Geotechnics, Balkema, 415-420.
- Tweedie, J. J., Humphrey, D. N., and Sandford, T. C. (1998), "Tire shreds as lightweight retaining wall backfill: active conditions", J. of Geotech. Geoenviron. Eng., ASCE, 124(11), 1061-1070. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:11(1061)
- Vucetic, M. (1994), "Cyclic threshold shear strains in soils", J. of Geotechnical Engineering, ASCE, 120(12), 2208-2228. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:12(2208)
- Vucetic, M. and Dobry, R. (1991), "Effect of soil plasticity on cyclic response", J. of Geotechnical Engineering, ASCE, 117(1), 89-107. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(89)
- Yoon, G. L., Jeon, S. S., and Kim, B. T. (2004), "Mechanical characteristics of light-weighted soils using dredged materials", Marine Georesources & Geotechnology, 22(4), 215-229. https://doi.org/10.1080/10641190490467747
- Youwai, S. and Bergado, D. (2003), "Strength and deformation characteristics of shredded rubber tire-sand mixtures", Can. Geotech. J., 40(2), 254-264. https://doi.org/10.1139/t02-104