단량체의 종류에 따른 폴리(에틸렌 나프탈레이트) 공종합체의 물성 연구

Effect of Co-monomer on the Physical Properties of Poly(ethylene naphthalate) Copolymer

  • 김재현 (광 에너지 소재 연구센터, 단국대학교 고분자시스템공학과) ;
  • 허혜영 (SKC(주)) ;
  • 정태형 (SKC(주)) ;
  • 한준희 (SKC(주)) ;
  • 강호종 (광 에너지 소재 연구센터, 단국대학교 고분자시스템공학과)
  • Kim, Jae-Hyun (Center for Photofunctional Energy Materials, Department of Polymer Science and Engineering, Dankook University) ;
  • Heo, Hye-Young (SKC Central R&D Center) ;
  • Jung, Tae-Houng (SKC Central R&D Center) ;
  • Han, Joon-Hee (SKC Central R&D Center) ;
  • Kang, Ho-Jong (Center for Photofunctional Energy Materials, Department of Polymer Science and Engineering, Dankook University)
  • 투고 : 2010.09.23
  • 심사 : 2010.11.08
  • 발행 : 2011.03.25

초록

폴리(에틸렌 나프탈레이트) 중합 시 2,6-dimethyl naphthalene dicarboxylate와 함께 사용되는 디올 화합물인 ethylene glycol(EG), 1,3-propanediol(PD) 그리고 1,4-butanediol(BD)의 사용에 따른 공중합체의 물성을 살펴보았다. EG와 함께 PD 혹은 BD를 40% 이내 첨가하는 경우 합성된 폴리에스터가 무정형을 유지함을 알 수 있으며 이는 열적 특성과 배향 특성, 그리고 기계적 특성을 저하시키는 반면 치수안정성을 증가시킴을 획인할 수 있어 합성 폴리에스터가 유연기판 소재로의 적용 가능성을 확인하였다.

The physical properties of poly (ethylene 2,6-naphthalate) (PEN) copolymers were studied. PEN copolymers were synthesized successfully from the mixtures of ethylene glycol(EG), 1,3-propanediol (PD) and l,4-butanediol (BD) with 2,6-dimethyl naphthalene dicarboxylate. The results indicated that PEN copolymers showed an amorphous state when the content of BD(PD) in applied EG/BD(EG/PD) mixtures was less than 40% during the polycondensation. As a result, the lowering of thermal properties, orientation, and mechanical properties was found, however, the dimensional stability was improved. This is a promising result to apply the synthesized PEN copolymers as flexibles substrates.

키워드

참고문헌

  1. S. B. Park, J. Y. Kim, B. G. Lim, J. Y. Lim, I. H. Yeo, S. K. Ahn, S. Y. Kweon, J. H. Park, and D. G. Lim, J. KIEME, 23, 374 (2010).
  2. L. H. Strait and R. D. Jamison, J. Comp. Mater., 28, 211 (1994). https://doi.org/10.1177/002199839402800302
  3. S. M. Kim and K. H. Kim, J. KIEME, 20, 1072 (2007).
  4. S. J. Hwang, M. C. Tseng, J. R. Shu, and H. H. Yu, Surf. Coat. Tech., 202, 3669 (2008). https://doi.org/10.1016/j.surfcoat.2008.01.016
  5. V. L. Calil, C. Legnani, G. F. Moreira, C. Vilani, K. C. Teixeira, W. G. Quirino, R. Machado, C. A. Achete, and M. Cremona, Thin Solid Films, 518, 1419 (2009). https://doi.org/10.1016/j.tsf.2009.09.055
  6. S. R. Lim, J. S. Song, Y. J. Choi, and J. H. Kim, J. Kor. Vac. Sci. Tech., 2, 101 (1998).
  7. B. Cyziute, S. Tamulevicius, P. Goudeau, M. Andrulevicius, and A. Guobiene, Surf. Coat. Tech., 200, 6490 (2006). https://doi.org/10.1016/j.surfcoat.2005.11.060
  8. N. W. Hayes, G. Beamson, D. T. Clark, D. T. Clarke, and D. S. Law, Polymer, 37, 523 (1996). https://doi.org/10.1016/0032-3861(96)82925-9
  9. Y. Leterrier, L. Boogh, J. Andersons, and J. A. Manson, J. Polym. Sci. Part B: Polym. Phys., 35, 1449 (1997). https://doi.org/10.1002/(SICI)1099-0488(19970715)35:9<1449::AID-POLB15>3.0.CO;2-6
  10. C. C. McDowell, B. D. Freeman, and G. W. McNeely, J. Polym. Sci. Part B: Polym. Phys., 37, 2973 (1999). https://doi.org/10.1002/(SICI)1099-0488(19991101)37:21<2973::AID-POLB7>3.0.CO;2-M
  11. K. H. Yoon, H. N. Cho, and O. O. Park, J. Appl. Polym. Sci., 74, 2900 (1999). https://doi.org/10.1002/1097-4628(19991213)74:12<2900::AID-APP14>3.0.CO;2-C
  12. G. P. Karayannidis, N. Papachristos, D. N. Bikiaris, and G. Z. Papageorgiou, Polymer, 44, 7801 (2003). https://doi.org/10.1016/j.polymer.2003.10.037
  13. S. I. Ida and M. Ito, J. Appl. Polym. Sci., 110, 1814 (2008). https://doi.org/10.1002/app.28582
  14. C. C. McDowell, B. D. Freeman, G. W. McNeely, M. I. Haider, and A. J. Hill, J. Polym. Sci. Part B: Polym. Phys., 36, 2981 (1998). https://doi.org/10.1002/(SICI)1099-0488(19981130)36:16<2981::AID-POLB13>3.0.CO;2-N
  15. J. S. Son and D. S. Ji, Fibers and Polymers, 4, 156 (2003). https://doi.org/10.1007/BF02908272
  16. G. P. Karayannidis, G. Z. Papageorgiou, and D. N. Bikiaris, Polymer, 39, 4129 (1998). https://doi.org/10.1016/S0032-3861(98)00011-1
  17. S. S. Park, I. K. Kim, and S. S. Im, Polymer, 37, 2165 (1996). https://doi.org/10.1016/0032-3861(96)85861-7
  18. J. Kim, H. Y. Heo, T. H. Jung, J. H. Han, and H.-J. Kang, Polymer(Korea), 33, 371 (2009).