References
- Okamura, T., 1979. "Radial Thrust in Centrifugal Pumps with Single Vane Impeller," Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 45, No. 398, p. 1458. (in Japanese) https://doi.org/10.1299/kikaib.45.1458
- Aoki, M., 1984. "Instantaneous Inter-Blade Pressure Distributions and Fluctuating Radial Thrust in a Single-Blade Centrifugal Pump," Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 50, No. 451, p. 661. (in Japanese)
- Stepanoff, A. J., 1967. "Centrifugal and Axial Flow Pumps," p. 116, John Wiley & Sons.
- Agostinelli, A., Nobles, D. and Mockridge, C. R., 1960. "An Experimental Investigation of Radial Thrust in Centrifugal Pumps," Transactions of the American Society of Mechanical Engineers, Vol. 82, No. 2, p. 120.
- Biheller, H. J., 1965. "Radial Force on the Impeller of Centrifugal Pumps with Volute, Semivolute, and Fully Concentric Casings," Transactions of the American Society of Mechanical Engineers, Series A, Vol. 87, No. 3, p. 319.
- Imaichi, K., Uchida, N. and Shirai, T., 1971. "An Experimental Investigation on the Radial Thrust in a Centrifugal Pump," Transactions of the Japan Society of Mechanical Engineers, Vol. 37, No. 294, p. 322. (in Japanese) https://doi.org/10.1299/kikai1938.37.322
- Yoshida, Y., Sakatani, T., Kawakami, T. and Tsujimoto, Y., 1995. "Study of Hydraulic Unbalance Caused by Geometrical Manufacturing Errors of Centrifugal Impeller (1st Report: Experimental Results)," Turbomachinery, Vol. 23, No. 2, p. 72. (in Japanese)
- Benra, F.-K., Dohmen H.J. and Schneider O., 2003. "Calculation of Hydrodynamic Forces and Flow Induced Vibrations of Centrifugal Sewage Water Pumps," 4th ASME/JSME Joint Fluids Engineering Conference, Paper FEDSM2003-45102, Honolulu, Hawaii, USA.
- Benra, F.-K., Dohmen H.J. and Sommer M., 2006. "Experimental Investigation of Hydrodynamic Forces for Different Configurations of Single-Blade Centrifugal Pumps," The 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-11), Honolulu, Hawaii, USA.
- Nishi, Y., Fujiwara, R. and Fukutomi, J., 2009. "Design Method for Single-Blade Centrifugal Pump Impeller," Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 75, No. 754, p. 106. (in Japanese)
- Tanaka, K., Arai, M., Ikeo, S. and Matsumoto, Y., 1989. "Radial Thrust in Screw Centrifugal Pump Impeller," Turbomachinery, Vol. 17, No. 4, p. 215. (in Japanese)
- Ishida, I., 2002. "The Consideration in the Radial Thrust Decrease of Centrifugal Pump," Turbomachinery, Vol. 30, No. 12, p. 741. (in Japanese)
- Nishi, Y., Matsuo, N. and Fukutomi, J., 2008. "A Study on Internal Flow in a New Type of Sewage Pump (1st Report, Comparison between Experiment and CFD Calculation)," Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 74, No. 742, p. 1386. (in Japanese) https://doi.org/10.1299/kikaib.74.1386
- Fluent User's Manual, 2006. pp. 9-30. (in Japanese)
- Worster, R. C., 1963. "The Flow in Volutes and its Effect on Centrifugal Pump Performance," Proc. Instn. Mech. Engrs., Vol. 177, No. 31, p. 843.
- Nishi, Y., Makita, K. and Fukutomi, J., 2006. "A Study on a New Type of Sewage Pump," Transactions of the Japan Society of Mechanical Engineers, Series B, Vol. 72, No. 720, p. 1984. (in Japanese) https://doi.org/10.1299/kikaib.72.1984
Cited by
- Effect of Blade Outlet Angle on Unsteady Hydrodynamic Force of Closed-Type Centrifugal Pump with Single Blade vol.2014, pp.1542-3034, 2014, https://doi.org/10.1155/2014/838627
- Component Analysis of Unsteady Hydrodynamic Force of Closed-Type Centrifugal Pump with Single Blades of Different Blade Outlet Angles vol.2015, pp.1542-3034, 2015, https://doi.org/10.1155/2015/419736
- Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions vol.230, pp.6, 2016, https://doi.org/10.1177/0957650916656544
- Effect of Blade Wrap Angle on Performance of a Single-Channel Pump vol.42, pp.5, 2018, https://doi.org/10.1007/s40799-018-0243-4