한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제28권3호
  • /
  • Pages.339-348
  • /
  • 2011
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

재구성형 유연가공라인을 위한 시나리오 기반 시스템 셋업 및 스케줄링 체계

A Scenario based Framework for System Setup and Scheduling in Reconfigurable Manufacturing Systems

  • 이동호 (한양대학교 산업공학과) ;
  • 기지수 (한양대학교 산업공학과) ;
  • 김형원 (한양대학교 산업공학과) ;
  • 도형호 (한양대학교 산업공학과) ;
  • 유재민 (한양대학교 산업공학과) ;
  • 남성호 (한국생산기술연구원 융합생산기술연구부)
  • Lee, Dong-Ho (Department of Industrial Engineering, Hanyang Univ.) ;
  • Kim, Ji-Su (Department of Industrial Engineering, Hanyang Univ.) ;
  • Kim, Hyung-Won (Department of Industrial Engineering, Hanyang Univ.) ;
  • Doh, Hyoung-Ho (Department of Industrial Engineering, Hanyang Univ.) ;
  • Yu, Jae-Min (Department of Industrial Engineering, Hanyang Univ.) ;
  • Nam, Sung-Ho (Manufacturing Convergence Technology R&D Department, Korea Institute of Industrial Technology)
  • 투고 : 2010.08.20
  • 심사 : 2010.12.01
  • 발행 : 2011.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Reconfigurable manufacturing system (RMS), alternatively called changeable manufacturing, is a new manufacturing paradigm designed for rapid change in hardware and software components in order to quickly adjust production capacity and functionality in response to sudden changes in market or in regulatory requirements. Although there has been much progress in hardware components during the last decade, not much work has been done on operational issues of RMS. As one of starting studies on the operational issues, we suggest a framework for the system setup and scheduling problems to cope with the reconfigurability of RMS. System setup, which includes batching, part grouping, and loading, are concerned with the pre-arrangement of parts and tools before the system begins to process, and scheduling is the problem of allocating manufacturing resources over time to perform the operations specified by system setup. The framework consists of 8 scenarios classified by three major factors: order arrival process, part selection process, and tool magazine capacity. Each of the scenarios is explained with its subproblems and their interrelationships.

키워드

참고문헌

  1. Koren, Y., Heisel, U., Jovane, F., Moriwoki, T., Pritschow, G., Ulsoy, A. G. and van Brussel, H., "Reconfigurable Manufacturing Systems," Annals of the CIRP, Vol. 48. No. 2, pp. 527-540, 1999. https://doi.org/10.1016/S0007-8506(07)63232-6
  2. Park, M. W., "Reconfigurable Manufacturing Systems," Journal of the Korean Society of Precision Engineering, Vol. 17. No. 2, pp. 15-32, 2000.
  3. Mehrabi, M. G., Ulsoy, A. G. and Koren, Y., "Reconfigurable Manufacturing Systems: Key to Future Manufacturing," Journal of Intelligent Manufacturing, Vol. 11, No. 4, pp. 403-419, 2000. https://doi.org/10.1023/A:1008930403506
  4. ElMaraghy, H. A., "Flexible and Reconfigurable Manufacturing Systems Paradigm," International Journal of Flexible Manufacturing Systems, Vol. 17, No. 4, pp. 261-276, 2006.
  5. Wiendahl, H. P., ElMaraghy, H. A., Nyhuis, P., Zah, M. F., Wiendahl, H. H., Duffie, N. and Brieke, M., "Changeable Manufacturing - Classification, Design and Operation," Annals of the CIRP, Vol. 56, No. 2, pp. 783-809, 2007. https://doi.org/10.1016/j.cirp.2007.10.003
  6. Bi, Z. M., Lang, S. Y. T., Shen, W. and Wang, L., "Reconfigurable Manufacturing Systems: the State of the Art," International Journal of Production Research, Vol. 46, No. 4, pp. 967-992, 2008. https://doi.org/10.1080/00207540600905646
  7. Mehrabi, M. G., Ulsoy, A. G., Koren, Y. and Heytler, P., "Trends and Perspectives in Flexible and Reconfigurable Manufacturing Systems," Journal of Intelligent Manufacturing, Vol. 13, No. 2, pp. 135-146, 2002. https://doi.org/10.1023/A:1014536330551
  8. Koren, Y. and Ulsoy, A. G., "Reconfigurable Manufacturing Systems," Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #1, 1997.
  9. Mehrabi, M. G. and Ulsoy, A. G., "State-of-the-Art in Reconfigurable Manufacturing Systems," Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), Report #2, Vol. I, 1997.
  10. Bollinger, J. and Rusnak, R., "A Vision for Manufacturing in 2020," NSF Design and Manufacturing Grantees Conference, 1998.
  11. Youssef, A. M. and Elmaraghy, H. A., "Modelling and Optimization of Multiple-aspect RMS Configurations," International Journal of Production Research, Vol. 44, No. 22, pp. 4929-4958, 2006. https://doi.org/10.1080/00207540600620955
  12. Youssef, A. M. and Elmaraghy, H. A., "Optimal Configuration Selection for Reconfigurable Manufacturing Systems," International Journal of Flexible Manufacturing Systems, Vol. 19, No. 2, pp. 67-106, 2007. https://doi.org/10.1007/s10696-007-9020-x
  13. Deif, A. M. and Elmaraghy, W., "Investigating Optimal Capacity Scalability Scheduling in a Reconfigurable Manufacturing System," International Journal of Advanced Manufacturing Technology, Vol. 32, No. 5-6, pp. 557-562, 2007. https://doi.org/10.1007/s00170-005-0354-9
  14. Bi, Z. M., Lang, Y. T. and Orban, M. V., "Development of Reconfigurable Machines," International Journal of Advanced Manufacturing Technology, Vol. 39, No. 11-12, pp. 1227-1251, 2008. https://doi.org/10.1007/s00170-007-1288-1
  15. Spicer, P. and Carlo, H. J., "Integrating Reconfiguration Cost into the Design ok Multi-period Scalable Reconfigurable Manufacturing Systems," Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 202-210, 2007. https://doi.org/10.1115/1.2383196
  16. Youssef, A. M. and Elmaraghy, H. A., "Availability Consideration in the Optimal Selection of Multiple - aspect RMS Configurations," International Journal of Production Research, Vol. 46, No. 21 , pp. 5849-5882, 2008. https://doi.org/10.1080/00207540701261626
  17. Dou, J., Dai, X. and Meng, Z., "A GA-based Approach to Optimize Single-product Flow-line Configuration s of RMS," IEEE International Conference on Mechatronics and Automation, pp. 654-659, 2008.
  18. Liles, D. H. and Huff, B. L., "A Computer based Production Scheduling Architecture Suitable for Driving a Reconfigurable Manufacturing System," Computers and Industry, Vol. 19, No. 1-4, pp. 1-5, 1990. https://doi.org/10.1016/0360-8352(90)90066-U
  19. Landers, R. G., Min, B. K. and Koren, Y., "Reconfigurable Machine Tools," Annals of the CIRP, Vol. 50, No. 1, pp. 269-274, 2001. https://doi.org/10.1016/S0007-8506(07)62120-9
  20. Stecke, K. E., "Design, Planning, Scheduling and Control Problems of Flexible Manufacturing Systems," Annals of Operations Research, Vol. 3, No. 1, pp. 1-12, 1985. https://doi.org/10.1007/BF02023765
  21. Lee, D.-H., Kim, J.-S., Kim, H.-W., Doh, H.-H., Yu, J.-M. and Nam, S- H., "A Framework for System Setup and Scheduling in Reconfigurable Manufacturing Systems," Proc. of KSPE Spring Conference, pp. 105-106, 2010.