Abstract
We study the effect of mechanical machining and heat treatment on the surface residual stress of TP 316L stainless steel. Electrical discharge machining (EDM), milling and grinding were applied to TP 316L plate specimens. The residual stress and hardness were measured and the effect of heat treatment on the surface residual stress was examined. The residual stress was measured by the X-ray diffraction method, which showed that the surface residual stress was related only to the stress magnitude and was independent of the compressive or tensile component. The surface residual stress was greatly decreased by the heat treatment, but it was not removed completely.
본 논문은 TP316L 스테인리스강 재료에 대한 표면 기계가공 및 열처리에 의한 잔류응력의 생성 및 변화에 대해 연구한 것이다. 연구를 위해서 TP316L 시편에 대해 방전가공, 밀링, 연마의 3 가지 기계가공을 수행하고 표면의 잔류응력을 측정하였다. 동일한 방법으로 기계가공한 다른 시편은 열처리를 수행한 후에 표면잔류응력을 측정하여 열처리를 수행하지 않은 시편과의 차이를 비교하였다. 잔류응력측정은 엑스선회절법을 사용하였다. 또한 각 시편에 대해 비커스경도를 측정하여 열처리 수행전과 수행후의 경도를 비교하였다. 본 연구를 통해서 기계가공 방법에 따라 잔류응력의 형태가 달라지며 열처리에 의해서 대부분의 잔류응력이 제거됨이 확인되었다. 경도는 잔류응력의 인장 또는 압축의 방향에는 관계없이 크기에만 관련성이 있는 것으로 관찰되었다.