References
- Senuma, T.: Physical Metallurgy of Modern High Strength Steel Sheets, ISIJ Int. 41(2001), 520, https://doi.org/10.2355/isijinternational.41.520
- R. M. Lyengar, et al : Implication of hot-stamped boron steel components in automotive structure, SAE Paper, No.2008-01-0857
- Usibor 1500P and Hot-Stamping, AP&T Press Hardening Seminar, Nov 3rd, 2008
- B.Abdulhay, B.Bourouga : Experimental Study of Heat Transfer in Hot Stamping Process, Int J Mater Form, 2 (2009), 255-257. https://doi.org/10.1007/s12289-009-0457-1
- K. Mori, S. Maki, and Y. Tanaka : Warm and Hot Stamping of Ultra High Tensile Strength Steel Sheets Using Resistance Heating, Ann.CIRP, 54 (2005), 209-212 https://doi.org/10.1016/S0007-8506(07)60085-7
- Z.W. Xinga, . Baoa, Y.Y. Yang : Numerical simulation of hot stamping of quenchable boron steel, Mater. Sci.Eng A, 499 (2009), 28-31 https://doi.org/10.1016/j.msea.2007.09.102
- P. Hein : A global approach of the finite elemente simulation of hot stamping, in: Tagungsband SheMet' '05, Erlangen, Germany, 763-769.
- Yoon, S. H., Lee, J. H. and Lee, K. M. : A study on the fatigue properties of boron steel (AISI 51B20) Korean Society for Precision Engineering, 2001, 802-806 (in Korean)
- S. G. Shi, S. Westgate : Fiber-Delivered Laser Welding of Ultra-High Strength Steels for Automotive Applications, TWI Report, 865, 2007
- X.G. Qiu, W.L Chen, : The study on numerical simulation of the laser tailor welded blanks stamping, Journal of Mater.Proc.Tech., 2007, 128-131
- D.Anand, D.L.Chen. S.D.Bhole : Fatigue behavior of tailor (laser)-welded blanks for automotive applications, Mater.Sci.Eng.A, 420(2006), 199-207 https://doi.org/10.1016/j.msea.2006.01.075
- W. Ehling, L. Cretteur, A. Pic : Development of a laser decoating process for fully functional Al-Si coated press hardened steel laser welded blak solutions, Proceedings of the 5th International WLT-Conf, 2009, 427-431
- Y. Hovanski,a, M.L. Santellab, G.J. Grant : Friction stir spot welding of hot-stamped boron steel, Scripta Materialia, 57 (2007), 873-876 https://doi.org/10.1016/j.scriptamat.2007.06.060
- Johnny K Larsson : Weldability testing of DP1000 Materials Combinations, LattUHS Report 17, 2008
- Stanislaw Klimerk : Simulation of Spor Welds and Weld Seams of Press-Hardened Steel (PHS) Assemblies, LS-DYNA Anwenderforum, 2008, 21-28,
- H. S. Choi, B. M. Kim, K. H. Park : The Evaluation of Spor Weldability of quenched boron steel and galvannealed steel, Korean Society of Prec.Eng, 2009, 117-118 (in Korean)
- George E. Dieter : Mechanical Metalluirgy 3rd. Ed., McGraw-Hill, New York, 1986
- Tae-Jun Park, Chung-Yun Kang : Microstructures and Hardness of Al-Si Coated 11%Cr Ferritic Stainless Steel, 409L GTA Welds, KWJS, 28-3 (2010), 92-98 (in Korean) https://doi.org/10.5781/KWJS.2010.28.3.092
- Behrang Poorganji, Goro Miyamoto : Formation of ultrafine grained ferrite by warm deformationof lath martensite in low-alloy steels with different carbon content, Scripta Materialia, 59 (2008), 279-281 https://doi.org/10.1016/j.scriptamat.2008.03.041
- S. Morito, H. Tanaka, : The morphology and crystallography of lath martensite in Fe-C alloys, Acta Materialia, 51 (2003), 1789-1799 https://doi.org/10.1016/S1359-6454(02)00577-3
- S. Morito, H. Yoshida : Effect of block size on the strength of lath martensite in low carbon steels, Mater.Sci.Engg A, 2006, 438-440
- BY K. Poorhydarie, D. G. Iveye, : Estimation of Cooling Rate in the Welding of Plates with Intermediate Thickness, Welding Journal, 2005, Oct. 149-155
Cited by
- Effect of Coating Thickness on Microstructures and Tensile Properties in Yb:YAG Disk Laser Welds of Al-Si Coated Boron Steel vol.31, pp.3, 2013, https://doi.org/10.5781/KWJS.2013.31.3.66
- Laser Welding Properties of the S45C using Automobile Brake Parts vol.22, pp.1, 2014, https://doi.org/10.7467/KSAE.2014.22.1.103
- Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al–Si and Zn-coated boron steel vol.228, pp.4, 2014, https://doi.org/10.1177/0954405413501810
- Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer vol.6, pp.1687-8140, 2014, https://doi.org/10.1155/2014/925493
- Analysis of Laser Weldments for Dual-Phase and Martensitic Steel Sheets for Automotive Applications vol.353, pp.1662-9507, 2014, https://doi.org/10.4028/www.scientific.net/DDF.353.8