DOI QR코드

DOI QR Code

Variation of Toughness and Porosity Formation in Weld Metal with Al Content in Self-Shielded Arc Welding Wire

셀프실드용접 와이어의 Al 첨가량에 따른 용접금속 인성 및 기공형성 변화

  • Bang, Kook-Soo (Div. of Adv. Mat. Sci. & Eng., Pukyong National University) ;
  • Park, Chan (Div. of Adv. Mat. Sci. & Eng., Pukyong National University) ;
  • Woong, Kil (Welding Research Institute, ESAB SeAH Corp.) ;
  • Chang, Woong-Seong (Research Institute of Industrial Science and Technology.)
  • 방국수 (부경대학교 신소재공학부) ;
  • 박찬 (부경대학교 신소재공학부) ;
  • 길웅 ((주)세아ESAB 용접기술연구소) ;
  • 장웅성 (포항산업과학기술연구원 용접센타)
  • Received : 2010.06.25
  • Accepted : 2010.10.27
  • Published : 2011.02.28

Abstract

Three different welding wires were used to study the effects of Al content on weld metal toughness and porosity formation in self-shielded arc welding. Weld metal microstructure showed that while wire with 1.3% Al content contains coarse $\delta$-ferrite, wires with less than 0.5% Al content showed no such phase. In addition to the microstructural differences, cleanliness in weld metal was also different among wires. It showed that weld metal toughness was influenced by the $\delta$-ferrite formation, cleanliness and Ni addition. Even though wires with less than 0.5% Al content showed higher weld metal toughness, they showed relatively poor workability, forming porosities in weld bead in lower arc voltages.

Keywords

References

  1. R. de Haeck, B. Phelps and A.A. Smith: Developing Consumables and Process for Work on Offshore Platforms, Weld. and Metal Fab., Sep. (1980) 441-449
  2. T. Keeler: Innershield Welding, Part 1 Development and Applications, Met. Const., 13-11 (1981) 667- 673
  3. T. Keeler: Innershield Welding, Part 2 Properties, Met. Const., 13-12 (1981) 750-753
  4. K.J. Rodergs and J.C. Lochhead: Self-Shielded Flux Cored Arc Welding - The Route to Good Fracture Toughness, Weld. J., 66-7 (1987) 49-59
  5. R. Killing: Welding with Self-Shielded Wires - the Mechanism of Shielding and Droplet Transfer, Met. Const., 12-9 (1980) 433-436
  6. H.I. Kaplan and D.C. Hill: Thermodynamics of Air-Operating Flux Cored Electrodes and an Analysis of Weld Toughness, Weld. J., 55-1 (1976) 13s-19s
  7. J.C. Gonzalez, C.L. Llorente and H. Biloni: Correlation between Microstructure and Mechanical Properties for Two Self-Shielded Flux Cored Wires, Cand. Metall. Quarterly, 25-4 (1986) 319-326 https://doi.org/10.1179/cmq.1986.25.4.319
  8. S.S. Babu, S.A. David and M.A. Quintana: Modeling Microstructure Development in Self-Shielded Flux Cored Arc Welds, Weld. J., 80-4 (2001) 91s-97s
  9. D.J. Kotecki and B. Narayanan: Welding Consumable Developments in the Aftermath of the Northridge Earthquake, Weld. in the World, 49-1/2 (2005) 42-46 https://doi.org/10.1007/BF03266464
  10. M.A. Quintana, J. McLane, S.S. Babu and S.A. David and : Inclusion Formation in Self-Shielded Flux Cored Arc Welds, Weld. J., 80-4 (2001) 98s-105s