DOI QR코드

DOI QR Code

Crack constitutive model for the prediction of punching failure modes of fiber reinforced concrete laminar structures

  • Ventura-Gouveia, A. (Department of Civil Engineering, ISISE, School of Technology & Management, Polytechnic Institute of Viseu) ;
  • Barros, Joaquim A.O. (Department of Civil Engineering, ISISE, School of Engineering, University of Minho) ;
  • Azevedo, Alvaro F.M. (Department of Civil Engineering, Faculty of Engineering of the University of Porto)
  • 투고 : 2010.04.30
  • 심사 : 2011.03.14
  • 발행 : 2011.12.25

초록

The capability of a multi-directional fixed smeared crack constitutive model to simulate the flexural/punching failure modes of fiber reinforced concrete (FRC) laminar structures is discussed. The constitutive model is implemented in a computer program based on the finite element method, where the FRC laminar structures were simulated according to the Reissner-Mindlin shell theory. The shell is discretized into layers for the simulation of the membrane, bending and out-of-plane shear nonlinear behavior. A stress-strain softening diagram is proposed to reproduce, after crack initiation, the evolution of the normal crack component. The in-plane shear crack component is obtained using the concept of shear retention factor, defined by a crack-strain dependent law. To capture the punching failure mode, a softening diagram is proposed to simulate the decrease of the out-of-plane shear stress components with the increase of the corresponding shear strain components, after crack initiation. With this relatively simple approach, accurate predictions of the behavior of FRC structures failing in bending and in shear can be obtained. To assess the predictive performance of the model, a punching experimental test of a module of a façade panel fabricated with steel fiber reinforced self-compacting concrete is numerically simulated. The influence of some parameters defining the softening diagrams is discussed.

키워드

참고문헌

  1. Barros, J.A.O. and Figueiras, J.A. (2001), "Nonlinear analysis of steel fibre reinforced concrete slabs on grade", Comp. Struct. J., 79(1), 97-106. https://doi.org/10.1016/S0045-7949(00)00061-4
  2. Barros, J.A.O., Gettu, R. and Barragan, B.E. (2004), "Material nonlinear analysis of steel fibre reinforced concrete beams failing in shear", 6th International RILEM Symposium on fibre reinforced concrete - BEFIB 2004, Edts. M. di Prisco, R. Felicetti, G.A. Plizarri, Vol. 1, p. 711-720, 20-22 September.
  3. Barros, J.A.O., Pereira, E.N.B., Cunha, V.M.C.F., Ribeiro, A.F., Santos, S.P.F. and Queirós, P.A.A.A.V. (2005a), "PABERFIA - Lightweight sandwhich panels in steel fiber reinforced self compacting concrete", Technical Report 05-DEC/E-29, Dep. Civil. Eng., School Eng. University of Minho, 63 pp, November.
  4. Barros, J.A.O., Cunha, V.M.C.F., Ribeiro, A.F. and Antunes, J.A.B. (2005b), "Post-cracking behaviour of steel fibre reinforced concrete", Mater. Struct., 38(275), 47-56. https://doi.org/10.1007/BF02480574
  5. Barros, J.A.O., Pereira, E.B. and Santos, S.P.F. (2007), "Lightweight panels of steel fiber reinforced selfcompacting concrete", J. Mater. Civil. Eng., 19(4), 295-304. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(295)
  6. Barzegar, F. and Maddipudi, S. (1997), "Three-dimensional modeling of concrete structures. I: plain concrete", J. Struct. Eng., 123(10), 1339-1347. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1339)
  7. Bazant, Z.P. and Oh, B.H. (1983), "Crack band theory for fracture of concrete", Mater. Struct., 16(93), 155-177.
  8. Bazant, Z.P. (1984), Microplane model for strain controlled inelastic behavior, Desai, C.S., Gallagher, R.H. (Eds.), Mechanics of Engineering Materials. J. Wiley, London, pp. 5-59 (Chapter 3).
  9. Dahlblom, O. and Ottosen, N.S. (1990), "Smeared crack analysis using generalized fictitious crack model", J. Eng. Mech. - ASCE, 116(1), 55-76. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:1(55)
  10. de Borst, R. (1987), "Smeared cracking, plasticity, creep and thermal loading - a unified approach", Comput. Meth. Appl. Mech. Eng., 62, 89-110. https://doi.org/10.1016/0045-7825(87)90091-0
  11. de Borst, R. and Gutierrez, M.A. (1999), "A unified framework for concrete damage and fracture models including size effects", Int. J. Fract., 95, 261-277. https://doi.org/10.1023/A:1018664705895
  12. de Borst, R. (2002), "Fracture in quasi-brittle materials: a review of continuum damage-based approaches", Eng. Fract. Mech., 69, 95-112. https://doi.org/10.1016/S0013-7944(01)00082-0
  13. Okamura, H. (1997), "Ferguson lecture for 1996: self-compacting high-performance concrete", Concrete Int., 19(7), 50-54.
  14. Pereira, E.N.B. (2006), "Steel fibre reinforced self-compacting concrete: from material to mechanical behavior", Dissertation for Pedagogical and Scientific Aptitude Proofs, Department of Civil Engineering, University of Minho, 188 pp, http://www.civil.uminho.pt/composites.
  15. Rots, J.G. (1988), "Computational modeling of concrete fracture", PhD Thesis, Delft University of Technology.
  16. Sena-Cruz, J.M. (2004), "Strengthening of concrete structures with near-surface mounted CFRP laminate strips", PhD Thesis, Department of Civil Engineering, University of Minho, http://www.civil.uminho.pt/composites.
  17. Sena-Cruz, J.M., Barros, J.A.O., Ribeiro, A.F., Azevedo, A.F.M. and Camões, A.F.F.L. (2004), "Stress-crack opening relationship of enhanced performance concrete", 9th Portuguese Conference on Fracture, ESTSetubal, Portugal, 395-403.
  18. Sena-Cruz, J.M., Barros, J.A.O., Azevedo, A.F.M. and Ventura-Gouveia, A. (2007), "Numerical simulation of the nonlinear behavior of RC beams strengthened with NSM CFRP strips", Proceedings of CMNE/CILAMCE Congress, FEUP, Porto, Portugal, 13-15 June.
  19. Vandewalle, L. et al. (Technical Committee) (2002), "Test and design methods for steel fibre reinforced concrete - final recommendation", Mater. Struct., 35(253), 579-582. https://doi.org/10.1617/13884
  20. Yu, R.C., Gonzalo, R. and Chaves, E.W.V. (2007), "A comparative study between discrete and continuum models to simulate concrete fracture", Eng. Fract. Mech., doi:10.1016/j.engfracmech. 2007. 03. 031.

피인용 문헌

  1. Numerical simulation of the punching shear behaviour of self-compacting fibre reinforced flat slabs vol.74, 2015, https://doi.org/10.1016/j.conbuildmat.2014.10.003
  2. Development of innovative hybrid sandwich panel slabs: Advanced numerical simulations and parametric studies vol.152, 2016, https://doi.org/10.1016/j.compstruct.2016.05.072
  3. Application of plastic-damage multidirectional fixed smeared crack model in analysis of RC structures vol.125, 2016, https://doi.org/10.1016/j.engstruct.2016.07.013
  4. Creep and shrinkage effects in service stresses of concrete cable-stayed bridges vol.13, pp.4, 2014, https://doi.org/10.12989/cac.2014.13.4.483
  5. Parametric Study of the Use of Strain Softening/Hardening FRC for RC Elements Failing in Bending vol.24, pp.3, 2012, https://doi.org/10.1061/(ASCE)MT.1943-5533.0000373
  6. Assessment of the performance of steel fibre reinforced self-compacting concrete in elevated slabs vol.55, 2015, https://doi.org/10.1016/j.cemconcomp.2014.09.016
  7. Prediction of the load carrying capacity of elevated steel fibre reinforced concrete slabs vol.170, 2017, https://doi.org/10.1016/j.compstruct.2017.03.002
  8. Recycled Steel Fibre Reinforced Concrete failing in bending and in shear vol.85, 2015, https://doi.org/10.1016/j.conbuildmat.2015.03.070
  9. Performance of concrete structures with a combination of normal SCC and fiber SCC vol.20, pp.6, 2011, https://doi.org/10.12989/cac.2017.20.6.655
  10. FEM investigation of SFRCs using a substepping integration of constitutive equations vol.25, pp.2, 2020, https://doi.org/10.12989/cac.2020.25.2.181
  11. Blind competition on the numerical simulation of steel‐fiber‐reinforced concrete beams failing in shear vol.22, pp.2, 2021, https://doi.org/10.1002/suco.202000345