DOI QR코드

DOI QR Code

A numerical tension-stiffening model for ultra high strength fiber-reinforced concrete beams

  • Na, Chaekuk (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kwak, Hyo-Gyoung (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2009.07.30
  • 심사 : 2009.12.03
  • 발행 : 2011.02.25

초록

A numerical model that can simulate the nonlinear behavior of ultra high strength fiber-reinforced concrete (UHSFRC) structures subject to monotonic loadings is introduced. Since engineering material properties of UHSFRC are remarkably different from those of normal strength concrete and engineered cementitious composite, classification of the mechanical characteristics related to the biaxial behavior of UHSFRC, from the designation of the basic material properties such as the uniaxial stress-strain relationship of UHSFRC to consideration of the bond stress-slip between the reinforcement and surrounding concrete with fiber, is conducted in this paper in order to make possible accurate simulation of the cracking behavior in UHSFRC structures. Based on the concept of the equivalent uniaxial strain, constitutive relationships of UHSFRC are presented in the axes of orthotropy which coincide with the principal axes of the total strain and rotate according to the loading history. This paper introduces a criterion to simulate the tension-stiffening effect on the basis of the force equilibriums, compatibility conditions, and bond stress-slip relationship in an idealized axial member and its efficiency is validated by comparison with available experimental data. Finally, the applicability of the proposed numerical model is established through correlation studies between analytical and experimental results for idealized UHSFRC beams.

키워드

참고문헌

  1. Attard, M.M. and Setunge, S. (1996), "Stress-strain relationship of confined and unconfined concrete", ACI Mater. J., 93(5), 1-11.
  2. Bischoff, P.H. (2003), "Tension-stiffening and cracking of steel fiber-reinforced concrete", J. Mater. Civil. Eng. - ASCE, 15(2), 174-182. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:2(174)
  3. CEB-FIP (1993), CEB-FIP model code 1990: design code, CEB Bulletin d'Information No.213/214, Thomas Telford, London.
  4. Collins, M.P. and Mitchell, D. (1991), Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, NJ.
  5. Crisfield, M.A. (1991), Non-linear finite element analysis of solids and structures, John Wiley and Sons, London.
  6. Demeke, A. and Tegos, I.A. (1994), "Steel fiber reinforced concrete in biaxial stress tension-compression conditions", ACI Struct. J., 91(5), 579-584.
  7. Ezeldin, A.S. and Balaguru. P.N. (1992), "Normal- and high-strength fiber reinforced concrete under compression", J. J. Mater. Civil. Eng. - ASCE, 4(4), 415-429. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  8. Fields, K. and Bischoff, P.H. (2004), "Tension-stiffening and cracking of high-strength reinforced concrete tension members", ACI Struct. J., 101(4), 447-456.
  9. Foster, S.J., Voo, Y.L. and Chong, K.T. (2006), "FE analysis of steel fiber reinforced concrete beams failing in shear: variable engagement model", ACI Special Public., 237, 55-70.
  10. Graybeal, B.A. (2007), "Compressive behavior of ultra-high-performance fiber-reinforced concrete", ACI Mater. J., 104(2), 146-152.
  11. Gupta, A.K. and Maestrini, S.R. (1990), "Tension-stiffness model for reinforced concrete bars", J. Struct. Eng. - ASCE, 116(3), 769-790. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:3(769)
  12. Hognestad, E. (1951), A study on combined bending and axial load in reinforced concrete members, Bulletin Series No. 399, Bulletin No. 1., Engineering Experiment Station, University of Illinois, IL.
  13. Hussein, A. and Marzouk, H. (2000), "Behavior of high-strength concrete under biaxial stresses", ACI Mater. J., 97(1), 27-36.
  14. Jungwirth, J. and Muttoni, A. (2004), "Structural behavior of tension members in UHPC", Proceeding of International Symposium on UHPC.
  15. Kolle, B., Phillips, D.V., Zhang, B., Bhatt, B. and Pearce, C.J. (2004), "Experimental investigation of the biaxial properties of high performance steel fibre reinforced concrete", Proceeding of 6th RILEM Symposium on Fibre-Reinforced Concrete (FRC): RILEM, Varenna, Italy.
  16. Korea Institute of Construction Technology (2005), Development of girder using ultra-high performance cementitious composite for bridge, KICTEP, Korea.
  17. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behavior of concrete under biaxial stresses", ACI J., 66(8), 656-666.
  18. Kwak, H.G. and Kim, D.Y. (2001), "Nonlinear analysis of RC shear walls considering tension-stiffening effect", Comp. Struct., 79(5), 499-517. https://doi.org/10.1016/S0045-7949(00)00157-7
  19. Kwak, H.G. and Kim, D.Y. (2004), "Material nonlinear analysis of RC shear walls subject to monotonic loading", Eng. Struct., 26(11), 1517-1533. https://doi.org/10.1016/j.engstruct.2004.05.013
  20. Kwak, H.G. and Na, C.K. (2007), "Nonlinear analysis of RC structures considering bond-slip effect", Korean Soc. Civil Eng., 27(3), 401-412.
  21. Li, V.C. (1998), Engineered cementitious composites-tailored composites through micromechanical modeling, Canadian Society for Civil Engineering, Montreal.
  22. Lorrain, M., Maurel, O. and Seffo, M. (1998), "Cracking behavior of reinforced high-strength concrete tension ties", ACI Struct. J., 95(5), 626-635.
  23. Mansur, M.A., Chin, M.S. and Wee, T.H. (1999), "Stress-strain relationship of high-strength fiber concrete in compression", J. Mater. Civil. Eng. - ASCE, 11(1), 21-29. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:1(21)
  24. Redaelli, D. (2006), "Testing of reinforced high performance fibre concrete members in tension", Proceeding of 6th International Ph.D. Symposium in Civil Engineering.
  25. Rizkalla, S.H. and Hwang, L.S. (1984), "Crack prediction for members in uniaxial tension", ACI J., 81(6), 572-579.
  26. SETRA (2002), Bentons Fibres a Ultra-Hautes Peformances, Recommandations Provisoires, Documents Scientifiques et Techniques, SETRA-AFGC, France.

피인용 문헌

  1. Ductile behavior of high performance fiber reinforced cementitious composite (HPFRCC) frames vol.115, 2016, https://doi.org/10.1016/j.conbuildmat.2016.04.078
  2. Numerical and statistical analysis about displacements in reinforced concrete beams using damage mechanics vol.10, pp.3, 2012, https://doi.org/10.12989/cac.2012.10.3.307
  3. Prediction of deflection of high strength steel fiber reinforced concrete beams and columns vol.9, pp.2, 2012, https://doi.org/10.12989/cac.2012.9.2.133
  4. Increasing the flexural capacity of RC beams using partially HPFRCC layers vol.16, pp.4, 2015, https://doi.org/10.12989/cac.2015.16.4.545
  5. Computational and Simulation Analysis of Pull-Out Fiber Reinforced Concrete vol.2014, 2014, https://doi.org/10.1155/2014/576052