DOI QR코드

DOI QR Code

Antenna sensor skin for fatigue crack detection and monitoring

  • Deshmukh, Srikar (Department of Mechanical and Aerospace Engineering, University of Texas at Arlington) ;
  • Xu, Xiang (Department of Mechanical and Aerospace Engineering, University of Texas at Arlington) ;
  • Mohammad, Irshad (Department of Mechanical and Aerospace Engineering, University of Texas at Arlington) ;
  • Huang, Haiying (Department of Mechanical and Aerospace Engineering, University of Texas at Arlington)
  • 투고 : 2010.03.26
  • 심사 : 2010.10.13
  • 발행 : 2011.07.25

초록

This paper presents a flexible low-profile antenna sensor for fatigue crack detection and monitoring. The sensor was inspired by the sense of pain in bio-systems as a protection mechanism. Because the antenna sensor does not need wiring for power supply or data transmission, it is an ideal candidate as sensing elements for the implementation of engineering sensor skins with a dense sensor distribution. Based on the principle of microstrip patch antenna, the antenna sensor is essentially an electromagnetic cavity that radiates at certain resonant frequencies. By implementing a metallic structure as the ground plane of the antenna sensor, crack development in the metallic structure due to fatigue loading can be detected from the resonant frequency shift of the antenna sensor. A monostatic microwave radar system was developed to interrogate the antenna sensor remotely. Fabrication and characterization of the antenna sensor for crack monitoring as well as the implementation of the remote interrogation system are presented.

키워드

참고문헌

  1. Axelrod, F.B. and Hilz, M.J. (2003), "Inherited autonomic neuropathies", Semin Neurol., 23(4), 381-90. https://doi.org/10.1055/s-2004-817722
  2. Bhartia, P., Rao, K. and Tomar, R. (1991), Millimeter-wave Microstrip and Printed Circuit Antennas, Artech House.
  3. Carlson, J.A., English, J.M. and Coe, D.J. (2006), "A flexible, self-healing sensor skin", Smart Mater. Struct., 15(5), N129-N135. https://doi.org/10.1088/0964-1726/15/5/N05
  4. Chang, F.K. and Ihn, J.B. (2004), "Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics", Smart Mater. Struct. 13(3), 609-620. https://doi.org/10.1088/0964-1726/13/3/020
  5. Deshmukh, S. and Huang, H. (2010), "Wireless interrogation of antenna sensor", Meas. Sci. Technol., 21, 035201. https://doi.org/10.1088/0957-0233/21/3/035201
  6. Giurgiutiu, V. and Bao, J. (2002), "Embedded-ultrasonics structural radar for in situ structural health monitoring of thin-wall structures", Struct. Health Monit. 3, 121-140.
  7. Hakozaki, M., Hatori, A. and Shinoda, H. (2001), "A sensitive skin using wireless tactile sensing elements", Proceedings of the Technical Digest of the 18th sensor symposium, 147-150.
  8. Jang, J., Frank, J.L., Patrick, C.Y. and Sohn, H. (2006), "Development of self-contained sensor skin for highway bridge monitoring", Proceedings of the SPIE, 6174 II, 617441.
  9. Liu, L. and Yuan, F.G. (2008), "Wireless sensors with dual-controller architecture for active diagnosis in structural health monitoring", Smart Mater. Struct., 17(2), 025026. https://doi.org/10.1088/0964-1726/17/2/025026
  10. Loh, K.J., Hou, T.C, Lynch, J.P. and Kotov, N.A. (2009), "Carbon nanotube sensing skins for spatial strain and impact damage identification", J. Nondestruct. Eval., 28(1), 9-25. https://doi.org/10.1007/s10921-009-0043-y
  11. Lynch, J. (2005), "Design of a wireless active sensing unit for localized structural health monitoring", Struct. Health Monit., 12(3-4), 405-423. https://doi.org/10.1002/stc.77
  12. Makarov, S.N. (2002), Antenna and EM Modeling with MATLAB, John Wiley and Sons, Inc, New York.
  13. Mohammad, I. and Huang, H. (2010), "Monitoring fatigue crack growth and opening using antenna sensors", Smart Mater. Struct., 19(5), 055023.
  14. Morita, K., Kazuya, N. (2006), "Crack detection sensor using RFID-tag and electrically conductive paint", AIJ J. Technol. Design, 24, 73-76.
  15. Nagayama, T., Spencer Jr., B.F. and Rice, J.A., (2009), "Autonomous decentralized structural health monitoring using smart sensors", Struct. Health Monit., 16(7-8), 842-859.
  16. Shoureshi, R. and Shen, A. (2006), "Self-powered sensory nerve system for civil structures using hybrid forisome actuators", Proceedings of the SPIE, 6174, 617438.
  17. Smith, J. (1989), Senses and Sensibilities, John Wiley & Sons.
  18. Verpoorten, N., et al. (2006), "Novel frameshift and splice site mutations in the neurotrophic tyrosine kinase receptor type 1 gene (NTRK1) associated with hereditary sensory neuropathy type IV", Neuromuscul. Disord., 16(1), 19-25. https://doi.org/10.1016/j.nmd.2005.10.007
  19. Woolf, C.J. and Ma, Q. (2007), "Nociceptors - noxious stimulus detectors", Neuron., 55(3), 353-64. https://doi.org/10.1016/j.neuron.2007.07.016
  20. Zilberstein, V., Schlicker, D., Walrath, K., Weiss, V. and Goldfine, N. (2001), "MWM eddy current sensors for monitoring of crack initiation and growth during fatigue tests and in service", Int. J. Fatigue, 23(1), S477-S485. https://doi.org/10.1016/S0142-1123(01)00154-2
  21. Zhang, B., Zhou, Z., Zhang, K., Yan, G. and Xu, Z. (2006), "Sensitive skin and the relative sensing system for real-time surface monitoring of crack in civil infrastructure", J. Intel. Mat. Syst. Str., 17(10), 907-917. https://doi.org/10.1177/1045389X06061521

피인용 문헌

  1. Flexible Wireless Antenna Sensor: A Review vol.13, pp.10, 2013, https://doi.org/10.1109/JSEN.2013.2242464
  2. Wireless Passive Ultra High Frequency RFID Antenna Sensor for Surface Crack Monitoring and Quantitative Analysis vol.18, pp.7, 2018, https://doi.org/10.3390/s18072130