DOI QR코드

DOI QR Code

Impedance-based health monitoring and mechanical testing of structures

  • Palomino, Lizeth Vargas (School of Mechanical Engineering, Federal University of Uberlandia, Campus Santa Monica) ;
  • de Moura, Jose Dos Reis Vieira Jr. (School of Mechanical Engineering, Federal University of Uberlandia, Campus Santa Monica) ;
  • Tsuruta, Karina Mayumi (School of Mechanical Engineering, Federal University of Uberlandia, Campus Santa Monica) ;
  • Rade, Domingos Alves (School of Mechanical Engineering, Federal University of Uberlandia, Campus Santa Monica) ;
  • Steffen, Valder Jr. (School of Mechanical Engineering, Federal University of Uberlandia, Campus Santa Monica)
  • 투고 : 2009.09.05
  • 심사 : 2010.08.10
  • 발행 : 2011.01.25

초록

The mechanical properties obtained from mechanical tests, such as tensile, buckling, impact and fatigue tests, are largely applied to several materials and are used today for preliminary studies for the investigation of a desired element in a structure and prediction of its behavior in use. This contribution focus on two widely used different tests: tensile and fatigue tests. Small PZT (Lead Titanate Zirconate) patches are bonded on the surface of test samples for impedance-based health monitoring purposes. Together with these two tests, the electromechanical impedance technique was performed by using aluminum test samples similar to those used in the aeronautical industry. The results obtained both from tensile and fatigue tests were compared with the impedance signatures. Finally, statistical meta-models were built to investigate the possibility of determining the state of the structure from the impedance signatures.

키워드

참고문헌

  1. Bhalla, S., Naidu, A.S.K., Ong, C.W. and Soh, C.K. (2002), "Practical issues in the implementation of electromechanical impedance technique for NDE", Proceedings of the SPIE International Symposium on Smart Materials, Nano-, and Micro-Smart System, Melbourne, Australia.
  2. Branco, C.A.G.M. (1994), Mecanica dos Materiais, 2nd Ed., Fundacao Calouste Guelbenkian, Lisboa (in Portuguese).
  3. Chaudhry, Z., Joseph, T., Sun, F. and Rogers, C. (1995), "Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches", Proceedings of the Smart Structures and Integrated Systems 1995, San Diego, CA, USA.
  4. Chaudhry, Z., Lalande, F., Ganino, A., Rogers, C.A. and Chung, J. (1996), "Monitoring the integrity of composite patch structural repair via piezoelectric actuators/sensors", Proceedings of the 36th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and AIAA/ASME Adaptive Structures Forum. IV, New Orleans, LA, USA.
  5. Farrar, C.R., Lieven, N.A.J. and Bement, M.T. (2005), Damage Prognosis for Aerospace, Civil and Mechanical System Chapter 1, John Wiley & Sons, The Atrium, Southern Gate, West Sussex, England.
  6. Giurgiutiu, V. and Zagrai, A. (2000), "Characterization of piezoelectric wafer active sensors", J. Intel. Mat. Syst. Str., 11(12), 959-976. https://doi.org/10.1106/A1HU-23JD-M5AU-ENGW
  7. Giurgiutiu, V., Redmond, J., Roach, D. and Rackow, K. (2000), "Active sensors for health monitoring of aging aerospace structures", Proceedings of the SPIE'S 7th International Symposium on Smart Structures and Materials and 5th International Symposium on nondestructive Evaluation and Health Monitoring of Aging Infrastructure, Newport beach, Canada.
  8. Giurgiutiu, V., Zagrai, A. and Bao, J.J. (2002), "Piezoelectric wafer embedded active sensors for aging aircraft structural health monitoring", Struct. Health Monit., 1(1), 41-61. https://doi.org/10.1177/147592170200100104
  9. Giurgiutiu, V. and Zagrai, A. (2005), "Damage detection in thin plates and aerospace structure with the electromechanical impedance method", Struct. Health Monit., 4(2), 99-118. https://doi.org/10.1177/1475921705049752
  10. Grisso, B. and Inman, D.J. (2008), "Autonomous hardware development for impedance-based structural health monitoring", Smart Struct. Syst., 4(3), 305-318. https://doi.org/10.12989/sss.2008.4.3.305
  11. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electromechanical analysis of adaptive material systems - determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5(1), 12-20. https://doi.org/10.1177/1045389X9400500102
  12. Moura, J.R.V. and Steffen, V. (2004), "Impedance-based health monitoring: frequency band evaluation", Proceedings of the XXII IMAC International Modal Analysis Conference, Dearborn-Michigan, USA, January .
  13. Moura, J.R.V. and Steffen, V. (2006), "Impedance-based health monitoring for aeronautic structures using statistical meta-modeling", J. Intel. Mat. Syst. Str., 17(11), 1023-1036. https://doi.org/10.1177/1045389X06063087
  14. Neto R.M.F., Steffen Jr., V., Rade, D.A., Gallo, C.A. and Palomino, L.V. (2010), "A low-cost electromechanical impedance-based SHM architecture for multiplexed piezoceramic actuators", Struct. Health Monit., DOI: 10.1177/1475921710379518.
  15. Palomino, L.V. and Steffen, V. (2009), "Damage metrics associated with electromechanical impedance technique for SHM applied to a riveted structure", Proceedings of the Cobem 2009, Gramado-RS, Brazil.
  16. Park, G., Kabeya, K., Cudney, H.H. and Inman, D.J. (1999), "Impedance-based structural health monitoring for temperature varying applications", JSME Int. J. A- Solid M., 42(2), 249-258. https://doi.org/10.1299/jsmea.42.249
  17. Park, G., Cudney, H. and Inman, D.J. (2000), "An integrated health monitoring technique using structural impedance sensors", J. Intel. Mat. Syst. Str., 11(6), 448-455. https://doi.org/10.1106/QXMV-R3GC-VXXG-W3AQ
  18. Park, G., Cudney, H. and Inman, D.J. (2001), "Feasibility of using impedance-based damage assessment for pipeline systems", Earthq. Eng. Struct. D., 30(10), 1463-1474. https://doi.org/10.1002/eqe.72
  19. Park, G., Sohn, H., Farrar, C.R. and Inman, D.J. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib. Digest, 35(6), 85-92. https://doi.org/10.1177/0583102403035002564
  20. Park, G. and Inman, D.J. (2005), Damage Prognosis for Aerospace, Civil and Mechanical System Chapter 13, John Wiley & Sons, The Atrium, Southern Gate, West Sussex, England.
  21. Peairs, D.M., Park, G. and Inman, D.J. (2004), "Improving accessibility of the impedance-based structural health monitoring", J. Intel. Mat. Syst. Str., 15(2), 129-139. https://doi.org/10.1177/1045389X04039914
  22. Raju, V. (1997), Implementing Impedance - Based Health Monitoring, PhD. Thesis, Virginia Polytechnic Institute and State University, Virginia.
  23. Soh, C.K., Tseng, K., Bhalla, S. and Gupta, A. (2000), "Performance of smart piezoceramic patches in health monitoring of a RC Bridge" , Smart Mater. Struct., 9(4), 533-542. https://doi.org/10.1088/0964-1726/9/4/317
  24. Souza, S.A. (2000), Ensaios mecanicos de materiais metalicos: Fundamentos teoricos e praticos, 5th Ed., Edgard Blucher, Sao Paulo (in Portuguese).
  25. Stokes, J.P. and Cloud, G.L. (1993), "The application of interferometric technique to the nondestructive inspection of fiber-reinforced materials", Exp. Mech., 33(4), 314-319. https://doi.org/10.1007/BF02322147
  26. Sun, F.P., Chaudhry, Z., Liang C. and Rogers, C.A. (1995), "Truss structure integrity identification using PZT sensor-actuator" J. Intel. Mat. Syst. Str., 6(1), 134-139. https://doi.org/10.1177/1045389X9500600117

피인용 문헌

  1. Monitoring of Fatigue in Welded Beams Using Piezoelectric Wafer Based Impedance Technique 2013, https://doi.org/10.1007/s10921-013-0209-5
  2. Real-time structural health monitoring of fatigue crack on aluminum beam using an impedance-based portable device vol.28, pp.20, 2017, https://doi.org/10.1177/1045389X17705213
  3. Influences of mechanical contact on damage evaluation with electromechanical impedance technique vol.25, pp.3, 2014, https://doi.org/10.1177/1045389X13493356
  4. Impedance-based structural health monitoring applied to steel fiber-reinforced concrete structures vol.42, pp.7, 2020, https://doi.org/10.1007/s40430-020-02458-4