DOI QR코드

DOI QR Code

Stability analysis of bimodular pin-ended slender rod

  • Yao, Wenjuan (Department of Civil Engineering, Shanghai University) ;
  • Ma, Jianwei (Department of Civil Engineering, Shanghai University) ;
  • Hu, Baolin (Department of Civil Engineering, Shanghai University)
  • 투고 : 2010.10.12
  • 심사 : 2011.10.12
  • 발행 : 2011.11.25

초록

Many novel materials, developed in recent years, have obvious properties with different modulus of elasticity in tension and compression. The ratio of their tensile modulus to compressive modulus is as high as five times. Nowadays, it has become a new trend to study the mechanical properties of these bimodular materials. At the present stage, there are extensive studies related to the strength analysis of bimodular structures, but the investigation of the buckling stability problem of bimodular rods seems to cover new ground. In this article, a semi-analytical method is proposed to acquire the buckling critical load of bimodular slender rod. By introducing non-dimensional parameters, the position of neutral axis of the bimodular rod in the critical state can be determined. Then by combining the phased integration method, the deflection differential equation of bimodular pin-ended slender rod is deduced. In addition, the buckling critical load is obtained by solving this equation. An example, which is conducted by comparing the calculation results between the three of the methods including the laboratory tests, numerical simulation method and the method we developed here, shows that the method proposed in the present work is reliable to use. Furthermore, the influence of bimodular characteristics on the stability is discussed and analyzed.

키워드

참고문헌

  1. Ambartsumyan, S.A. (1986), Elasticity Theory of Different Modulus, Eds. W. Ruifeng and Z. Yunzhen, Railway Press, Beijing, China.
  2. Barak, M.M., Currey, J.D., Weiner, S. and Shahar, R. (2009), "Are tensile and compressive Young's moduli of compact bone different", J. Mech. Behav. Bimed. Mat., 2(1), 51-60. https://doi.org/10.1016/j.jmbbm.2008.03.004
  3. Bert, C.W. (1977), "Models for fibrous composites with different properties in tension and compression", J. Eng. Mat. Tech., 99(4), 344-349. https://doi.org/10.1115/1.3443550
  4. Bert, C.W. and Ko, C.L. (1985), "Buckling of columns constructed of bimodular materials", Int. J. Eng. Sci., 23(6), 641-657. https://doi.org/10.1016/0020-7225(85)90134-X
  5. Bertoldi, K., Bigoni, D. and Drugan, W.J. (2008), "An orthotropic and bimodular elastic material", Compos. Sci. Tech., 68, 1363-1375. https://doi.org/10.1016/j.compscitech.2007.11.016
  6. Bruno, D., Lato, S. and Sacco, E. (1994), "Nonlinear analysis of bimodular composite plates under compression", Comput. Mech., 14, 28-37. https://doi.org/10.1007/BF00350155
  7. Cai, L. and Yu, H. (2009), "Constitutive relation of elastic materials with different elastic moduli in tension and compression", J. Xi'an Univ. Sci. Tech., 29(1), 17-21.
  8. Destrade, M., Gilchrist, M.D., Motherway, J.A. and Murphy, J.G. (2009), "Bimodular rubber buckles early in bending", Mater. Mech., 42(4), 469-476.
  9. He, X.T. (2007), "Applying the equivalent section method to solve beam subjected to lateral force and bendcompression column with different moduli", Int. J. Mech. Sci., 49, 919-924. https://doi.org/10.1016/j.ijmecsci.2006.11.004
  10. He, X.T., Zheng, Z.L. and Sun, J.Y. (2009), "Convergence analysis of a finite element method based on different moduli in tension and compression", Int. J. Solids Struct., 46(20), 3734-3740. https://doi.org/10.1016/j.ijsolstr.2009.07.003
  11. Jones, R.M. (1977), "Stress-strain relations for materials with different moduli in tension and compression", Am. Inst. Aeron. Astron., 15(1), 16-23. https://doi.org/10.2514/3.7297
  12. Klisch, S.M. (2006), "A bimodular theory for finite deformations: comparison of orthotropic second-order and exponential stress constitutive equations for articular cartilage", Bimomech. Model. Mechanobio., 5(2), 90-101. https://doi.org/10.1007/s10237-006-0027-0
  13. Leal, A. (2009), "Compressive strength analysis for high performance fibers with different modulus in tension and compression", J. Compos. Mater., 43(6), 661-674. https://doi.org/10.1177/0021998308088589
  14. Lan, T., Lin, P.D. and Chen, L.W. (2003), "Thermal buckling of bimodular sandwich beams", Compos. Struct., 25, 345-352.
  15. Patel, B.P. (2004), "Thermo-flexural analysis of thick laminates of bimodulus composite materials", Compos. Struct., 63(1), 11-20. https://doi.org/10.1016/S0263-8223(03)00120-X
  16. Qu, C. (2009), "Deformation of geocell with different tensile and compressive modulus", Elec. J. Geotech. Eng., 14, 1-14.
  17. Raffaele, Z. and Fabrizio, G. (2001), "Damage evolution in bimodular laminated composites under cyclic loading", Compos. Struct., 53(4), 381-402. https://doi.org/10.1016/S0263-8223(01)00048-4
  18. Tseng, Y.P. and Lee, C.T. (1995), "Bending analysis of bimodular laminates using a higher-order finite strip method", Compos. Struct., 30(3), 341-350. https://doi.org/10.1016/0263-8223(94)00048-4
  19. Tseng, Y.P. and Jiang, Y.C. (1998), "Stress analysis of bimodular laminates using hybrid stress plate element", Int. J. Solids Struct., 35(17), 2025-2028. https://doi.org/10.1016/S0020-7683(97)00170-4
  20. Yang, H. and Zhu, Y. (2006), "Solving elasticity problems with bi-modulus via a smoothing technique", Chinese J. Comput. Mech., 23(1), 19-23.
  21. Yang, H. and Xu, M. (2009), "Solving inverse bimodular problems via artificial neutral network", Inverse Pro. Sci. Eng., 17(8), 999-1017. https://doi.org/10.1080/17415970902758009
  22. Yao, W.J., Zhang, C. and Jiang, X. (2006), "Nonlinear mechanical behavior of combined members with different moduli", Int. J. Nonlin. Sci. Numer. Simul., 7(2), 233-238.
  23. Yao, W.J. and Ye, Z. (2004), "Analytical solution of bending-compression column using different tensioncompression modulus", J. Appl. Math. Mech., 25(9), 901-909.
  24. Yao, W.J. and Ye, Z. (2004), "Analytical solution for bending beam subject to later force with different modulus", J. Appl. Math. Mech., 25(10), 1014-1022.
  25. Yao, W.J. and Ye, Z. (2004), "The analytical and numerical solution of retaining wall based on elastic theory of different modulus", J. Shanghai Jiaotong Univ., 38(6), 1022-1027.
  26. Yao, W.J. and Ye, Z. (2006), "Internal forces for statically indeterminate structures having different moduli in tension and compression", J. Eng. Mech.-ASCE, 132(7), 739-746. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:7(739)
  27. Yao, W.J. and Ye, Z. (2005), "Analytical method and the numerical model of temperature stress for the structure with different modulus", J. Mech. Strength, 27(6), 808-814.
  28. Ye, Z.M. (1997), "A new finite element formulation for planar elastic deformation", Int. J. Numer. Meth. Eng., 14(40), 2579-2592.

피인용 문헌

  1. Temperature stress analysis for bi-modulus beam placed on Winkler foundation vol.38, pp.7, 2017, https://doi.org/10.1007/s10483-017-2216-6
  2. Temperature stress for bending beam with different moduli under different constraints vol.10, pp.2, 2014, https://doi.org/10.1108/MMMS-03-2013-0018
  3. Thermal Stress Analysis for Bi-modulus Foundation Beam under Nonlinear Temperature Difference vol.14, pp.01, 2017, https://doi.org/10.1142/S0219876217500244