DOI QR코드

DOI QR Code

Concurrent flexural strength and deformability design of high-performance concrete beams

  • Ho, J.C.M. (Department of Civil Engineering, The University of Hong Kong) ;
  • Zhou, K.J.H. (Department of Civil Engineering, The University of Hong Kong)
  • 투고 : 2010.03.29
  • 심사 : 2011.10.11
  • 발행 : 2011.11.25

초록

In the design of earthquake resistant reinforced concrete (RC) structures, both flexural strength and deformability need to be considered. However, in almost all existing RC design codes, the design of flexural strength and deformability of RC beams are separated and independent on each other. Therefore, the pros and cons of using high-performance materials on the flexural performance of RC beams are not revealed. From the theoretical results obtained in a previous study on flexural deformability of RC beams, it is seen that the critical design factors such as degree of reinforcement, concrete/steel yield strength and confining pressure would simultaneously affect the flexural strength and deformability. To study the effects of these factors, the previous theoretical results are presented in various charts plotting flexural strength against deformability. Using these charts, a "concurrent flexural strength and deformability design" that would allow structural engineers to consider simultaneously both strength and deformability requirements is developed. For application in real construction practice where concrete strength is usually prescribed, a simpler method of determining the maximum and minimum limits of degree of reinforcement for a particular pair of strength and deformability demand is proposed. Numerical examples are presented to illustrate the application of both design methods.

키워드

과제정보

연구 과제 주관 기관 : The University of Hong Kong

참고문헌

  1. ACI Committee 318 (2008), Building Code Requirements for Reinforced Concrete and Commentary ACI 318M-08, Manual of Concrete Practice, American Concrete Institute, Michigan, USA.
  2. Altin, S., Kuran, F., Anil, O. and Kara, M.E. (2008), "Rehabilitation of heavily earthquake damaged masonry building using steel straps", Struct. Eng. Mech., 30(6), 651-664. https://doi.org/10.12989/sem.2008.30.6.651
  3. Ates, S., Soyluk, K., Dumanoglu, A.A. and Bayraktar, A. (2009), "Earthquake response of isolated cable-stayed bridges under spatially varying ground motions", Struct. Eng. Mech., 31(6), 639-662. https://doi.org/10.12989/sem.2009.31.6.639
  4. Attard, M.M. and Setunge, S. (1996), "The stress strain relationship of confined and unconfined concrete", ACI Mater. J., 93(5), 432-442.
  5. Au, F.T.K., Chan, K.H.E., Kwan, A.K.H. and Du, J.S. (2009), "Flexural ductility of prestressed concrete beams with unbonded tendons", Comput. Concrete, 6(6), 451-472. https://doi.org/10.12989/cac.2009.6.6.451
  6. Bae, S. and Bayrak, O. (2008), "Plastic hinge length of reinforced concrete columns", ACI Struct. J., 105(3), 290-300.
  7. Bai, Z.Z. and Au, F.T.K. (2009), "Effects of strain hardening of reinforcement on flexural strength and ductility of reinforced concrete columns", Struct. Des. Tall Spec., DOI: 10.1002/tal.554
  8. Bayrak, O. and Sheikh, S.A. (2001), "Plastic hinge analysis", J. Struct. Eng.-ASCE, 127(9), 1092-1100. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1092)
  9. Bechtoula, H., Kono, S. and Watanabe, F. (2009), "Seismic performance of high strength reinforced concrete columns", Struct. Eng. Mech., 31(6), 697-716. https://doi.org/10.1016/j.engstruct.2008.11.006
  10. Belarbi, A., Prakash, S. and You, Y.M. (2009), "Effect of spiral reinforcement on flexural-shear torsional seismic behavior of reinforced concrete circular bridge column", Struct. Eng. Mech., 33(2), 137-158. https://doi.org/10.12989/sem.2009.33.2.137
  11. Bernardo, L.F.A. and Lopes, S.M.R. (2009), "Plastic analysis of HSC beams in flexure", Mater. Struct., 42, 51-69. https://doi.org/10.1617/s11527-008-9366-x
  12. Bindhu, K.R., Jaya, K.P. and Manicka Selvam, V.K. (2008), "Seismic resistance of exterior beam-column joints with non-conventional confinement reinforcement detailing", Struct. Eng. Mech., 30(6), 733-761. https://doi.org/10.1016/j.engstruct.2007.05.019
  13. Challamel, N. (2009), "An application of large displacement limit analysis to frame structures", Struct. Eng. Mech., 33(2), 159-177. https://doi.org/10.12989/sem.2009.33.2.159
  14. Chen, Y.H. and Ding, Y.J. (2008), "Passive, semi-active, and active tuned-liquid-column dmapers", Struct. Eng. Mech., 30(1), 1-20. https://doi.org/10.1016/j.engstruct.2007.02.016
  15. Chen, S., Jia, Y. and Wang, X. (2009), "Experimental study of moment redistribution and load carrying capacity of externally prestressed continuous composite beams", Struct. Eng. Mech., 31(5), 615-619.
  16. Chung, T.S.K., Lam, E.S.S., Wu, B. and Xu, Y.L. (2009), "Experimental and numerical verification of hydraulic displacement amplification damping system", Struct. Eng. Mech., 33(1), 1-14. https://doi.org/10.12989/sem.2009.33.1.001
  17. Debernardi, P.G. and Taliano, M. (2002), "On evaluation of rotation capacity of reinforced concrete beams", ACI Struct. J., 99(3), 360-368.
  18. European Committee for Standardization (ECS) (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, UK.
  19. Elmenshawi, A. and Brown, T. (2009) "Modelling criteria for R/C elements constructed with ultra-high-strength concrete and subjected to cyclic loading", Struct. Des. Tall Spec., DOI: 10.1002/tal.532
  20. Feng, R. and Young, B. (2009) "Behaviour of concrete-filled stainless steel tubular X-joints subjected to Compression", Thin Wall. Struct., 47(4), 365-374. https://doi.org/10.1016/j.tws.2008.09.006
  21. Fu, C. (2009), "Passive vibration control of plan-asymmetric buildings using tuned liquid column gas dampers", Struct. Eng. Mech., 33(3), 339-355. https://doi.org/10.12989/sem.2009.33.3.339
  22. Galal, K. (2007), "Lateral force-displacement ductility relationship of non-ductile squat RC columns rehabilitated using FRP confinement", Struct. Eng. Mech., 25(1), 75-89. https://doi.org/10.12989/sem.2007.25.1.075
  23. Ghosh, R.K. and Ghosh, A.D. (2008), "Soil interaction effects on the performance of compliant liquid column damper for seismic vibration control of short period structures", Struct. Eng. Mech., 28(1), 89-105. https://doi.org/10.12989/sem.2008.28.1.089
  24. Hashemi, S.H., Maghsoudi, A.A. and Rahgozar, R. (2008), "Flexural ductility of reinforced HSC beams strengthened CFRP sheets", Struct. Eng. Mech., 30(4), 403-426. https://doi.org/10.12989/sem.2008.30.4.403
  25. Haskett, M., Oehlers, D.J., Mohamed Ali, M.S. and Wu, C. (2009), "Rigid body moment-rotation mechanism for reinforced concrete beam hinges", Eng. Struct., 31, 1032-1041. https://doi.org/10.1016/j.engstruct.2008.12.016
  26. Hawileh, R.A., Malhas, F.A. and Rahman, A. (2009), "Comparison between ACI 318-05 and Eurocode 2 (EC2-94) in flexural concrete design", Struct. Eng. Mech., 32(6), 705-724. https://doi.org/10.12989/sem.2009.32.6.705
  27. Hino, J., Yoshitomi, S., Tsuji, M. and Takewaki, I. (2008), "Bound of aspect ratio of base-isolated buildings considering nonlinear tensile behavior of rubber bearing", Struct. Eng. Mech., 30(3), 351-368. https://doi.org/10.12989/sem.2008.30.3.351
  28. Ho, J.C.M., Kwan, A.K.H. and Pam, H.J. (2003), "Theoretical analysis of post-peak flexural behaviour of normal- and high-strength concrete beams", Struct. Des. Tall Spec., 12, 109-125. https://doi.org/10.1002/tal.216
  29. Ho, J.C.M. and Pam, H.J. (2003), "Inelastic design of low-axially loaded high-strength reinforced concrete columns", Eng. Struct., 25(8), 1083-1096. https://doi.org/10.1016/S0141-0296(03)00050-6
  30. Ho, J.C.M., Kwan, A.K.H. and Pam, H.J. (2004), "Minimum flexural ductility design of high-strength concrete beams", Mag. Concrete Res., 56(1), 13-22. https://doi.org/10.1680/macr.2004.56.1.13
  31. Ho, J.C.M., Au, F.T.K. and Kwan, A.K.H. (2005), "Effects of strain hardening of steel reinforcement on flexural strength and ductility of concrete beams", Struct. Eng. Mech., 19(2), 185-198. https://doi.org/10.12989/sem.2005.19.2.185
  32. Ho, J.C.M., Lam, J.Y.K. and Kwan, A.K.H. (2010a), "Flexural ductility and deformability of concrete beams incorporating high-performance materials", Struct. Des. Tall Spec., DOI: 10.1002/tal.579
  33. Ho, J.C.M., Lam, J.Y.K. and Kwan, A.K.H. (2010b), "Effectiveness of adding confinement for ductility improvement of high-strength concrete columns", Eng. Struct., 32, 714-725. https://doi.org/10.1016/j.engstruct.2009.11.017
  34. Ho, J.C.M. and Pam, H.J. (2010), "Deformability evaluation of high-strength reinforced concrete columns", Mag. Concrete Res., 62(8), 569-583. https://doi.org/10.1680/macr.2010.62.8.569
  35. Hong, H.P., Wang, S.S. and Kwan, A.K.H. (2008), "Impact of uncertain natural vibration period on quantile of seismic demand", Struct. Eng. Mech., 28(4), 357-372. https://doi.org/10.12989/sem.2008.28.4.357
  36. Inel, M., Ozmen, H.B. and Bilgin, H. (2008), "Seismic performance evaluation of school buildings in Turkey", Struct. Eng. Mech., 30(5), 535-558. https://doi.org/10.12989/sem.2008.30.5.535
  37. Kavianipour, O. and Sadati, S.H. (2009), "Effects of damping on the linear stability of a free-free beam subjected to follower and transversal forces", Struct. Eng. Mech., 33(6), 709-724. https://doi.org/10.12989/sem.2009.33.6.709
  38. Kim, T. and Kim, J. (2007), "Seismic performance evaluation of a RC special moment frame", Struct. Eng. Mech., 27(6), 671-682. https://doi.org/10.12989/sem.2007.27.6.671
  39. Kim, T.H., Kim, Y.J. and Shin, H.M. (2008a), "Seismic performance assessment of reinforced concrete bridge piers supported by laminated rubber bearings", Struct. Eng. Mech., 29(3), 259-278. https://doi.org/10.12989/sem.2008.29.3.259
  40. Kim, D., Yi, J.H., Seo, H.Y. and Chang, C. (2008b), "Earthquake risk assessment of seismically isolated extradosed bridges with lead rubber bearings", Struct. Eng. Mech., 29(6), 689-707. https://doi.org/10.12989/sem.2008.29.6.689
  41. Ko, M.Y., Kim, S.W. and Kim, J.K. (2001), "Experimental study on the plastic rotation capacity of reinforced high strength concrete beams", Mater. Struct., 34, 302-311. https://doi.org/10.1007/BF02482210
  42. Kwak, H.G. and Kim, S.P. (2010), "Simplified monotonic moment-curvature relation considering fixed-end rotation and axial force", Eng. Struct., 32, 69-79. https://doi.org/10.1016/j.engstruct.2009.08.017
  43. Kwan, A.K.H., Ho, J.C.M. and Pam, H.J. (2002), "Flexural strength and ductility of reinforced concrete beams", Proceedings Institution of Civil Engineers, Structures and Buildings, 152(4), 361-369.
  44. Kwan, A.K.H., Au, F.T.K. and Chau, S.L. (2004), "Effects of confinement on flexural strength and ductility design of HS concrete beams", Struct. Eng., 84(23-24), 38-44.
  45. Kwan, A.K.H. and Ho, J.C.M. (2010), "Ductility design of high-strength concrete beams and columns", Adv. Struct. Eng., 13(4), 651-664. https://doi.org/10.1260/1369-4332.13.4.651
  46. Lam, S.S.E., Wu, B., Liu, Z.Q. and Wong, Y.L. (2008), "Experimental study on seismic performance of coupling beams not designed for ductility", Struct. Eng. Mech., 28(3), 317-333. https://doi.org/10.12989/sem.2008.28.3.317
  47. Leung, C.K.Y. (1996), "Design criteria for pseudoductile fiber-reinforced composites", J. Eng. Mech.-ASCE, 122(1), 10-18. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:1(10)
  48. Li, C. and Xiong, X. (2008), "Estimation of active multiple tuned mass dampers for asymmetric structures", Struct. Eng. Mech., 29(5), 505-530. https://doi.org/10.12989/sem.2008.29.5.505
  49. Li, G.Q., Yang, T.C. and Chen, S.W. (2009), "Behavior and simplified analysis of steel-concrete composite beams subjected to localized blast loading", Struct. Eng. Mech., 32(2), 337-350. https://doi.org/10.12989/sem.2009.32.2.337
  50. Lopes, S.M.R. and Bernardo, L.F.A. (2003), "Plastic rotation capacity of high-strength concrete beams", Mater. Struct., 36, 22-31. https://doi.org/10.1007/BF02481567
  51. Lu, X. and Zhou, Y. (2007), "An applied model for steel reinforced concrete columns", Struct. Eng. Mech., 27(6), 697-711. https://doi.org/10.12989/sem.2007.27.6.697
  52. Maghsoudi, A.A. and Bengar, H.A. (2006), "Flexural ductility of HSC members", Struct. Eng. Mech., 24(2), 195-212. https://doi.org/10.12989/sem.2006.24.2.195
  53. Mahini, S.S. and Ronagh, H.R. (2009), "Numerical modeling of FRP strengthened RC beam-column joints", Struct. Eng. Mech., 32(5), 649-665. https://doi.org/10.12989/sem.2009.32.5.649
  54. Mendis, P. (2001), "Plastic hinge lengths of normal and high-strength concrete in flexure", Adv. Struct. Eng., 4(4), 189-195. https://doi.org/10.1260/136943301320896651
  55. Nawy, E.G., Danesi, R.F. and Grosko, J.J. (1968), "Rectangular spiral binders effect on plastic hinge rotation capacity in reinforced concrete beams", ACI J., 65(12), 1001-1010.
  56. NZS 3101, Standards New Zealand (2006), Concrete Structures Standard, Part 1 - The Design of Concrete Structures, Wellington, New Zealand.
  57. Pam, H.J., Kwan, A.K.H. and Ho, J.C.M. (2001), "Post-peak behavior and flexural ductility of doubly reinforced normal- and high-strength concrete beams", Struct. Eng. Mech., 12(5), 459-474. https://doi.org/10.12989/sem.2001.12.5.459
  58. Pam, H.J. and Ho, J.C.M. (2009), "Length of critical region for confinement steel in limited ductility highstrength reinforced concrete columns", Eng. Struct., 31, 2896-2908. https://doi.org/10.1016/j.engstruct.2009.07.015
  59. Papakonstantinou, C.G. and Katakalos, K. (2009), "Flexural behavior of reinforced concrete beams strengthened with a hybrid inorganic matrix-steel fiber retrofit system", Struct. Eng. Mech., 31(5), 567-585. https://doi.org/10.12989/sem.2009.31.5.567
  60. Park, H., Kang, S.M., Chung, L. and Lee, D.B. (2007), "Moment-curvature relationship of flexure-dominated walls with partially confined end-zones", Eng. Struct., 29, 33-45. https://doi.org/10.1016/j.engstruct.2006.03.035
  61. Park, J.W. and Kim, S.E. (2008), "Nonlinear inelastic analysis of steel-concrete composite beam-columns using stability functions", Struct. Eng. Mech., 30(6), 763-785. https://doi.org/10.12989/sem.2008.30.6.763
  62. Pecce, M. and Fabbrocino, G. (1999), "Plastic rotation capacity of beams in normal and high-performance concrete", ACI Struct. J., 96(2), 290-296.
  63. Ramadoss, P. and Nagamani, K. (2009), "Behavior of high-strength fiber reinforced concrete plates under inplane and transverse loads", Struct. Eng. Mech., 31(4), 371-382. https://doi.org/10.12989/sem.2009.31.4.371
  64. Rubinstein, M., Moller, O. and Giuliano, A. (2007), "Preliminary design and inelastic assessment of earthquake-resistant structural systems", Struct. Eng. Mech., 26(3), 297-313. https://doi.org/10.12989/sem.2007.26.3.297
  65. Sadjadi, R. and Kianoush, M.R. (2010), "Application of fiber element in the assessment of the cyclic loading behavior of RC columns", Struct. Eng. Mech., 34(3), 301-317. https://doi.org/10.12989/sem.2010.34.3.301
  66. Su, R.K.L., Lam, W.Y. and Pam, H.J. (2009) "Experimental study of plate-reinforced composite deep coupling beams", Struct. Des. Tall Spec., 18, 235-257. https://doi.org/10.1002/tal.407
  67. Tsang, H.H., Su, R.K.L., Lam, N.T.K. and Lo, S.H. (2009), "Rapid assessment of seismic demand in existing building structures", Struct. Des. Tall Spec., 18, 427-439. https://doi.org/10.1002/tal.444
  68. Wang, Y.F., Han, B., Du, J.S. and Liu, K.W. (2007), "Creep analysis of concrete filled steel tube arch bridges", Struct. Eng. Mech., 27(6), 639-650. https://doi.org/10.12989/sem.2007.27.6.639
  69. Watson, S. and Park, R. (1994), "Simulated seismic load tests on reinforced concrete columns", J. Struct. Eng.-ASCE, 120(6), 1825-1849. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:6(1825)
  70. Weerheijm, J., Mediavilla, J. and van Doormaal, J.C.A.M. (2009), "Explosive loading of multi storey RC buildings: Dynamic response and progressive collapse", Struct. Eng. Mech., 32(2), 193-212. https://doi.org/10.12989/sem.2009.32.2.193
  71. Wei, C.Q., Zhou, X.G. and Ye, L.P. (2007), "Experimental study of masonry walls strengthened with CFRP", Struct. Eng. Mech., 25(6), 675-690. https://doi.org/10.12989/sem.2007.25.6.675
  72. Wu, Y.F., Oehlers, D.J. and Griffith, M.C. (2004), "Rational definition of the flexural deformation capacity of RC column sections", Eng. Struct., 26, 641-650. https://doi.org/10.1016/j.engstruct.2004.01.001
  73. Wu, W.J. and Cai, C.S. (2009), "Comparison of deck-anchored damper and clipped tuned mass damper on cable vibration reduction", Struct. Eng. Mech., 32(6), 741-754. https://doi.org/10.12989/sem.2009.32.6.741
  74. Wu, Y.F. and Wei, Y.Y. (2010), "Effects of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns", Eng. Struct., 32, 32-45. https://doi.org/10.1016/j.engstruct.2009.08.012
  75. Yagob, O., Galal, K. and Naumoski, N. (2009), "Progressive collapse of reinforced concrete structures", Struct. Eng. Mech., 32(6), 771-786. https://doi.org/10.12989/sem.2009.32.6.771
  76. Yeh, F.Y. and Chang, K.C. (2007), "Confinement efficiency and size effects of FRP confined circular concrete columns", Struct. Eng. Mech., 26(2), 127-150. https://doi.org/10.12989/sem.2007.26.2.127
  77. Zhang, G., Liu, B., Bai, G. and Liu, J. (2009), "Experimental study on seismic behavior of high strength reinforced concrete frame columns with high axial compression ratios", Struct. Eng. Mech., 33(5), 653-656. https://doi.org/10.12989/sem.2009.33.5.653
  78. Zhou, F. and Young, B. (2009). "Concrete-filled aluminium circular hollow section column tests", Thin Wall. Struct., 47(11), 1272-1280. https://doi.org/10.1016/j.tws.2009.03.014
  79. Zhou, K.J.H., Ho, J.C.M. and Su, R.K.L. (2010), "Normalised rotation capacity for deformability evaluation of high-performance concrete beams", Earthq. Struct., 1(3), 269-287. https://doi.org/10.12989/eas.2010.1.3.269
  80. Zhou, Y.W., Wu, Y.F., Teng, J.G. and Leung, A.Y.T. (2010), "Parametric space for the optimal design of compression-yielding FRP-reinforced concrete beams", Mater. Struct., 43, 81-97. https://doi.org/10.1617/s11527-009-9472-4
  81. Zhu, Y., Su, R.K.L. and Zhou, F.L. (2007), "Seismic behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 1: Experimental study", Struct. Eng. Mech., 27(2), 149-172. https://doi.org/10.12989/sem.2007.27.2.149
  82. Zhu, Y. and Su, R.K.L. (2010), "Seismic behavior of strengthened reinforced concrete coupling beams by bolted steel plates, Part 2: Evaluation of theoretical strength", Struct. Eng. Mech., 34(5), 563-580. https://doi.org/10.12989/sem.2010.34.5.563

피인용 문헌

  1. Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios vol.48, pp.6, 2013, https://doi.org/10.12989/sem.2013.48.6.833