DOI QR코드

DOI QR Code

Experimental and theoretical research on the compression performance of CFRP sheet confined GFRP short pole

  • Chen, Li (Engineering Institute of Engineer Corps, PLA University of Science and Technology) ;
  • Zhao, Qilin (Engineering Institute of Engineer Corps, PLA University of Science and Technology) ;
  • Jiang, Kebin (Engineering Institute of Engineer Corps, PLA University of Science and Technology)
  • 투고 : 2010.10.24
  • 심사 : 2011.08.17
  • 발행 : 2011.10.25

초록

The axial compressive strength of unidirectional FRP is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. In order to restrain the lateral expansion and splitting of GFRP, and accordingly heighten its axial compressive bearing capacity, a project that to confine GFRP pole with surrounding CFRP sheet is suggested in the present study. The Experiment on the CFRP sheet confined GFRP poles showed that a combined structure of high bearing capacity was attained. Basing on the experiment research a theoretical iterative calculation approach is suggested to predict the ultimate axial compressive stress of the combined structure, and the predicted results agree well with the experimental results. Then the influences of geometrical parameters on the ultimate axial compressive stress of the combined structure are also analyzed basing on this approach.

키워드

참고문헌

  1. Birch, F. (1938), "The effect of pressure upon the elastic parameters of isotropic solids, according to Murnaghan's theory of finite strain", J. Appl. Phys., 9, 279-288. https://doi.org/10.1063/1.1710417
  2. Christiansen, A.W., Baer, E. and Radcliffe, S.V. (1971), "The mechanical behavior of polymers under high pressure", Phil. Mag., 24, 451-467. https://doi.org/10.1080/14786437108227400
  3. Fung, Y.C. (1994), A First Course in Continuum Mechanics, New Jersey, Prentice-Hall.
  4. Gonzalez, C. and Lorca, J.L. (2007), "Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling", Compos. Sci. Technol., 67, 2795-2806. https://doi.org/10.1016/j.compscitech.2007.02.001
  5. Hine, P.J., Deckett, R.A. and Kaddour, A.S. (2005), "The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites", Composites: Part A, 36, 279-289. https://doi.org/10.1016/j.compositesa.2004.06.004
  6. Hollaway, L.C. (2010), "A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties", Construction and Building Materials Special Issue on Fracture, Acoustic Emission and NDE in Concrete (KIFA-5), 24(12), 2419-2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062
  7. Hoppel, C.P.R. and Bogetti, T.A. (1995), "literature review-effects of hydrostatic pressure on the mechanical behavior of composite materials", J. Thermoplast Compos., 8, 375-409. https://doi.org/10.1177/089270579500800403
  8. Jones, R.M. (1975), Mechanics of Composite Materials, McGraw-Hill, New York.
  9. Juran, I. and Komornik, U. (2006), Behavior of Fiber-Reinforced Polymer Composite Piles Under Vertical Loads, Urban Utility Center of Polytechnic University, Brooklyn.
  10. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build Mater., 17, 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X
  11. Pae, K.D. and Bhateja, S.K. (1975), "The effect of hydrostatic pressure on the mechanical behavior of polymer", Journal of Macromolecular, Part C, Review in the Macromolecular Chemistry, 13, 1-75. https://doi.org/10.1080/15321797508068145
  12. Pae, K.D. and Sauer, J.A. (1970), Influence of Pressure on the Elastic Modulus, the Yield Strength, and the Deformation of Polymers, Aviemore, Scotland.
  13. Silano, A.A., Bhateja, S.K. and Pae, K.D. (1974), "Effects of hydrostatic pressure on the mechanical behavior of polymers: polyurethane, polyoxymethylene, and branched polyethylene", Int. J. Polym. Mater., 3, 117-131. https://doi.org/10.1080/00914037408081922
  14. Wang, X. and Wu, Z. (2010), "Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridges", Compos. Struct., 92(10), 2582-2590. https://doi.org/10.1016/j.compstruct.2010.01.023
  15. Wang, Z. (1991), Composite Mechanics and Composite Structure Mechanics, South China Technology University Press, Beijing.
  16. Weaver, C.W. and Williams, J.G. (1975), "Deformation of a carbon-epoxy composite under hydrostatic pressure", J. Mater. Sci., 10, 1323-1333. https://doi.org/10.1007/BF00540822
  17. Woo, P.J., Kyun, H.Y. and Sung, C.M. (2010), "Behaviors of concrete filled square steel tubes confined by carbon fiber sheets (CFS) under compression and cyclic loads", Steel Compos. Struct., 10(2), 187-205. https://doi.org/10.12989/scs.2010.10.2.187
  18. Wronski, A.S. and Parry, T.V. (1982), "Compressive failure and kinking in uniaxially aligned glass-resin composite under superposed hydrostatic pressure", J. Mater. Sci., 17, 3656-3662. https://doi.org/10.1007/BF00752211
  19. Xiong, J., Ma, L., Wu, L., Wang, B. and Vaziri, A. (2010), "Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures", Compos. Struct., 92(11), 2695-2702. https://doi.org/10.1016/j.compstruct.2010.03.010
  20. Xu, Z. (1990), Elastic Mechanics, High Education Press, Beijing.
  21. Youakim, S.A. and Karbhari, V.M. (2007), "An approach to determine long-term behavior of concrete members prestressed with FRP tendons", Constr. Build Mater., 21(5), 1052-1060. https://doi.org/10.1016/j.conbuildmat.2006.02.006
  22. Zhang, G., Liu, B., Bai, G. and Liu, J. (2009), "Experimental study on seismic behavior of high strength reinforced concrete frame columns with high axial compression ratios", Struct. Eng. Mech., 33(5), 653-656. https://doi.org/10.12989/sem.2009.33.5.653
  23. Zhang, X. and Ou, J. (2006), "Experimental research on compressive properties of concrete stub square column reinforced with FRP bars", J. Xi'an Univ. of Arch. & Tech., 4, 467-472.
  24. Zinoviev, P.A., Tsvetkov, S.V., Kulish, G.G., van den Berg, R.W. and Van Schepdael, L.J.M.M. (2001), "The behavior of high-strength unidirectional composites under tension with superposed hydrostatic pressure", Compos. Sci. Technol., 61(8), 1151-1161. https://doi.org/10.1016/S0266-3538(01)00016-1

피인용 문헌

  1. Experimental and Theoretical Research on the Compression Performance of CFRP Sheet Confined GFRP Short Pipe vol.2014, 2014, https://doi.org/10.1155/2014/109692
  2. Influence Factors of the Compression Performance of CFRP Sheet Confined GFRP Short Pipe vol.256-259, pp.1662-7482, 2012, https://doi.org/10.4028/www.scientific.net/AMM.256-259.863
  3. Analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipes based on three-dimensional stress state vol.77, pp.1, 2021, https://doi.org/10.12989/sem.2021.77.1.137