DOI QR코드

DOI QR Code

Roller compacted concrete pavements reinforced with steel and polypropylene fibers

  • Madhkhan, Morteza (Department of Civil Engineering, Isfahan University of Technology (IUT)) ;
  • Azizkhani, Rasool (Department of Civil Engineering, Isfahan University of Technology (IUT)) ;
  • Torki, Mohammad E. (Department of Civil Engineering, Sharif University of Technology (SUT))
  • 투고 : 2010.09.07
  • 심사 : 2011.06.24
  • 발행 : 2011.10.25

초록

In this paper, the effects of both pozzolans and (steel and poly-propylene) fibers on the mechanical properties of roller compacted concrete are studied. Specimens for the experiments were made using a soil-based approach; thus, the Kango's vibration hammer was used for compaction. The tests in the first stage were carried out to determine the optimal moisture requirements for mix designs using cubic $150{\times}150{\times}150$ mm specimens. In the tests of the second stage, the mechanical behaviors of the main specimens made using the optimal moisture obtained in the previous stage were evaluated using 28, 90, and 210 day cubic specimens. The mechanical properties of RCC pavements were evaluated using a soil-based compaction method and the optimum moisture content obtained from the pertaining experiments, and by adding different percentages of Iranian pozzolans as well as different amounts of steel fibers, each one accompanied by 0.1% of poly-propylene fibers. Using pozzolans, maximum increase in compressive strength was observed to occur between 28 and 90 days of age, rupture modulus was found to decrease, but toughness indices did not change considerably. The influence of steel fibers on compressive strength was often more significant than that of PP fibers, but neither steel nor PP fibers did contribute to increase in the rupture modulus independently. Also, the toughness indices increased when steel fibers were used.

키워드

참고문헌

  1. ACI 207.5 R-99 (2004), "Roller compacted mass concrete", ACI Manual of Concrete Practice, USA.
  2. ACI 211.3R-02 (2004), "Guide for selecting proportions for no-slump concrete", ACI Manual of Concrete Practice, USA.
  3. ACI 325.10R-99 (2004), "State-of-the-art report on roller compacted concrete pavements", ACI Manual of Concrete Practice, USA.
  4. ASTM C1018-94b (April 1994), "Standard test method for flexural toughness and first-crack strength of fiber reinforced concrete (Using Beam with Third Point Loading)", Standard Designation C1018-94b, 04(02), 502-509.
  5. Atis, C.D., Sevim, U.K., Ozcan, F., Bilim, O., Karahan, A.H., Tanrikulu, A.H. and Eksi, A. (2004), "Strength properties of roller compacted concrete containing a non-standard high calcium fly ash", Mater. Lett., 58, 1446-1450. https://doi.org/10.1016/j.matlet.2003.10.007
  6. Cabrera, J.G. (1985), "The use of pulverised fuel ash to produce durable concrete", Improvement of Concrete Durability, Thomas Telford, 29-57.
  7. Choi, Y.K. and Groom, J.L. (January 2001), "RCC mix design-soils approach", J. Mater. Civil Eng., 13(1), 71-76. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:1(71)
  8. Dawis, R.E., Carlson, R.W., Kelly, J.W. and Dawis, H.E. (1937), "Properties of cement and concretes containing fly ash", ACI J., 33(3), 577-612.
  9. Delatte, N., Amer, N. and Storey, C. (January 2003), "Improved management of RCC pavement technology", UTCA Report 01231, University Transportation Center for Alabama (UTCA).
  10. Ghazimoradi, A. and Ramezanianpoor, A.A. (1992), "Assessment of Iranian Pozzolanes", Building Research Center, No. 153, 1st edition.
  11. Hansen, K.D. and Reinhard, W.G. (1991), Roller Compacted Concrete Dams, McGraw-Hill.
  12. Isfahan Cement Factory (1997), "Chemical, physical, and mechanical properties of exported cements", Ordinary Type (I) Cement.
  13. Nanni, A. and Johari, A. (March 1989), "RCC pavement reinforced with steel fibers", Concrete Int. Des. Construct., 11(3), 64-69.
  14. PCA (2005), "Automakers drive acceptance of roller-compacted concrete", PL614, Portland Cement Association.
  15. Philleo, R.E. (1967), "Fly ash in mass concrete", Proceedings of 1st Int. Symp. on Fly Ash Utilization, Pittsburg, PA, Bureu of Mines, Washington, D.C., pp.69-79.
  16. Qasravi, H.Y., Asi, I.M. and Al-Abdol Wahhab, H.I. (2004), "Proportioning RCCP mixes under hot weather condition for a specified tensile strength", Cement Concrete Res., 35(2), 267-276.
  17. US Army Corps of Engineers (USACE 1995), "Roller compacted concrete pavement design and construction", Engineer Technical Letter 1110-3-475, Department of the Army, Washington, D.C.
  18. Vahedifard, F., Nili, M. and Meehan, C.L. (2010), "Assessing the effects of supplementary cementitious materials on the performance of low-cement roller compacted concrete pavement", J. Construct. Build. Mater., 24, 2528-2535. https://doi.org/10.1016/j.conbuildmat.2010.06.003
  19. Zdiri, M., Ouezdou, M.B., Abriak, N.E. and Neji, J. (2010), "Contribution of siderite fines additions on the roller compacted concrete (RCC) strength", J. Eng. Technol. Res., 2(1), 13-23.

피인용 문헌

  1. Flexural strength of roller compacted concrete pavements reinforced with glass-roved textiles vol.55, pp.1, 2015, https://doi.org/10.12989/sem.2015.55.1.137
  2. Mechanical properties and durability of roller compacted concrete pavement (RCCP) - a review vol.21, pp.7, 2011, https://doi.org/10.1080/14680629.2019.1579754