DOI QR코드

DOI QR Code

Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections

  • Tahir, Mahmood Md. (Steel Technology Center, Universiti Teknologi Malaysia) ;
  • Ngian, Poi Shek (Steel Technology Center, Universiti Teknologi Malaysia)
  • Received : 2008.10.23
  • Accepted : 2011.04.22
  • Published : 2011.06.25

Abstract

This paper investigates the design using wind-moment method for semi-rigid un-braced steel frames bending on weak axis. A limiting sway method has been proposed to reduce the frame sway. Allowance for steel section optimization between moment of inertia on minor axis column and major axis beam was used in conjunction with slope-deflection analysis to derive equations for optimum design in the proposed method. A series of un-braced steel frames comprised of two, four, and six bays ranging in height of two and four storey were studied on minor axis framing. The frames were designed for minimum gravity load in conjunction with maximum wind load and vice-versa. The accuracy of the design equation was found to be in good agreement with linear elastic computer analysis up to second order analysis. The study concluded that the adoption of wind-moment method and the proposed limiting sway method for semi-rigid steel frame bending on weak axis should be restricted to low-rise frames not more than four storey.

Keywords

References

  1. Anderson, D. (1987), "Design of multi-storey frames to sway deflection limitations steel-framed structures", Stability & Strength, Edition Narayanan, R., Elsevier Applied Science, 665-673.
  2. Anderson, D. and Kavianpour, K. (1991), "Analysis of steel frames with semi-rigid connections", Struct. Eng. Rev., 3, 79-87.
  3. Anderson, D. and Islam, M.A. (1987), "Design of multi-storey frames to sway deflection limitations", Struct. Eng., 57B, 11-17.
  4. Anderson, D., Reading, S.J. and Kavianpour, K. (1991), "Wind-moment design for unbraced frames", Steel Construction Institute Publication No. 082.
  5. Ashraf, M., Nethercot, D.A. and Ahmed, B. (2004), "Sway of semi-rigid steel frames Part 1: Regular frames", Eng. Struct., 26, 1809-1819. https://doi.org/10.1016/j.engstruct.2004.06.018
  6. Ashraf, M., Nethercot, D.A. and Ahmed, B. (2006), "Sway of semi-rigid steel frames Part 2: Irregular frames", Eng. Struct., 26, 1809-1819.
  7. Ashraf, M., Nethercot, D.A. and Ahmed, B. (2004), "A simplified method to predict sway of rigid multi-storey steel frames", Steel Compos. Struct., 4(4), 317-331. https://doi.org/10.12989/scs.2004.4.4.317
  8. British Standards Institute BS 5950-Part 1 (2000), Structural Use of Steelwork in Building Part 1: Code of Practice for Design - Rolled and Welded Sections, British Standards Institution, London.
  9. British Standards Institute BS 6399 (1997), Code of Basic Data for the Design of Buildings: Part 2: Wind Loads, British Standards Institution.
  10. Brown, N.D. (1995), "Aspects of sway frame design and ductility of composite end plate connections", Ph.D Thesis, University of Warwick.
  11. Degertekin, S.O. and Hayalioglu, M.S. (2004), "Design of non-linear semi-rigid steel frames with semi-rigid column bases", E. J. Struct. Eng., 4, 1-16.
  12. Dhillon B.S. and O'Malley, J.W. (1999), "Interactive design of semi-rigid steel frames", J. Struct. Eng., 125(5), 556-564. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(556)
  13. Eurocode 3 (2005), Design of Steel Structures: ENV 1993-1-1: Part 1.1: General Rules and Rules for Buildings, CEN, Brussels.
  14. European Steel Design Education Programme (1994) "Structural System: Building II", Group 14, Volume 21, The Steel Construction Institute, Silwood Park, Ascot, United Kingdom.
  15. Irwan, J. (2001), "Performance of connections on Minor Axis using Local Sections", M.Phil, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia.
  16. Kavianpour, K. (1990), "Design and analysis of unbraced steel frames", Ph.D Thesis, University of Warwick, 1990.
  17. Kemp, A.R. (2004), "Use of pin-jointed structures in teaching frame analysis", Eng. Struct., 26, 883-894. https://doi.org/10.1016/j.engstruct.2004.02.007
  18. Kim, Y.W. (1988), "The behaviour of beam-to-column web connections with flush end-plates", M.Sc Thesis, University of Warwick.
  19. Kishi, N., Chen, W.F. and Goto, Y. (1997), "Effective length factor of column in semi-rigid and unbraced frames", J. Struct. Eng., 123(3), 313-320. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:3(313)
  20. Lu, C.K., Chen, W.F., Chan, S.L. and Ma, T.W. (2008), "Direct second-order elastic analysis for steel frame design", Struct. Eng., 12(6), 379-389.
  21. Mageirou, G.E. and Gantes, C.J. (2006), "buckling strength of multi-storey sway, non-sway and partially-sway frames with semi-rigid connections", J. Constr. Steel Res., 62, 893-905. https://doi.org/10.1016/j.jcsr.2005.11.019
  22. Maquoi, R., Jaspart, J.P. and Demonceau, J.F. (2006), "Contribution to the design of sway composite frames", Composie Construction in Steel and Concrete V, 186(61), 653-663.
  23. Reading, S.J. (1989), "Investigation of the wind connection method", M.Sc Thesis, University of Warwick.
  24. Salter, P.R., Couchman, G.H. and Anderson, D. (1999), "Wind-moment design of low rise frames", SCI Publication P263, Silwood Park, Ascot, Berkshire, SL 5 7QN.
  25. Schueller, W. (1977), High-Rise Building Structures, John Wiley and Sons.
  26. Steel Construction Institute and British Constructional Steelwork Association (1992), SCI P206, Joints in Simple Construction, Volume 2: Practical Application, London.
  27. Steel Construction Institute and British Constructional Steelwork Association, SCI P207 (1996), Joints in Steel Construction. Moment Connections, Silwood Park, Ascot, Berks SL 7QN, London.
  28. Sulaiman, A. (2007), "Behaviour of partial-strength connection in semi-continuous construction for multi-storey braced steel frame using TWP sections", Ph.D Thesis, Faculty of Civil Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia.
  29. Tahir, M.M. (1997), "Structural and economic aspects of the use of semi-rigid joints in steel frames", Ph.D Thesis, University of Warwick.
  30. Tahir, M.M., Shek, P.N., Sulaiman, A. and Tan, C.S. (2009), "Experimental test on cruciform column sections using universal beam section", Int. J. Const. Build. Mater., 23, 1354-1364. https://doi.org/10.1016/j.conbuildmat.2008.07.014
  31. Van Keulen, D.C., Nethercot, D.A., Snijder, H.H. and Bakker, M.C.M. (2003), "Frame analysis incorporating semi-rigid joint action: applicablility of the half initial secant stiffness approach", J. Constr. Steel Res., 59, 1083-1100. https://doi.org/10.1016/S0143-974X(03)00031-2
  32. Xu, L. and Wang, X.H. (2007), "Stability of multi-storey unbraced steel frames subjected to variable loading", J. Constr. Steel Res., 63, 1506-1514. https://doi.org/10.1016/j.jcsr.2007.01.010