DOI QR코드

DOI QR Code

Ultimate strength of composite structure with different degrees of shear connection

  • Kim, Sang-Hyo (School of Civil and Environmental Engineering, Yonsei University) ;
  • Jung, Chi-Young (School of Civil and Environmental Engineering, Yonsei University) ;
  • Ahn, Jin-Hee (School of Civil and Environmental Engineering, Yonsei University)
  • 투고 : 2010.07.22
  • 심사 : 2011.06.22
  • 발행 : 2011.09.25

초록

Composite beam, which combined the material characteristic of the steel and concrete, has been widely used in the construction of various building and bridge system. For the effective application of the composite beam, the composite action on the composite interface between the concrete element and the steel element should be achieved by shear connectors. The behavioral characteristics of composite beam are related with the degree of interaction and the degree of shear connection according to the shear strength and shear stiffness of the stud shear connectors. These two concepts are also affected by the number of installed shear connector and the strength of composite materials. In this study, experimental and analytical evaluations of the degree of shear connection affected by stud diameter were conducted, and the relationship between structural behavior and the degree of shear connection was verified. The very small difference among the ultimate loads of the specimens depending on the change of the degree of connection was possibly because of the dependence of the ultimate load on the characteristic of plastic moment of the composite beam.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP)

참고문헌

  1. AASHTO (2004), "AASHTO LRFD Bridge Design Specification, SI units, 3rd edition", American Association of State Highway and Transportation Officials, Washington, D.C.
  2. Ahn J.H., Kim S.H. and Jeong Y.J. (2008), "Shear behaviors of perfobond rid shear connector under static and cyclic loadings", Magazine.Con. Res., 60(5), 347-357. https://doi.org/10.1680/macr.2007.00046
  3. Ahn J.H., Jung C.Y., Kim S.H. (2010), "Evaluation on structural behaviors of prestressed composite beams using external prestressing member", Struct. Eng. Mech., 34(2), 247-275 https://doi.org/10.12989/sem.2010.34.2.247
  4. Eurocode-4 ENV (2002), "Design of Composite Steel and Concrete Structures", Euro. Commi. Standard. (CEN).
  5. Lam D., M.ASCE, Ehab El-Lobody (2005), "Behavior of Headed Stud Shear Connectors in Composite Beam", J. Struct. Eng. 131(1), 96-107 https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96)
  6. Liang Q.Q., Uy B., Bradford M.A., Ronagh H.R. (2004), "Ultimate strength of continuous composite beams in combined bending and shear", J. Constr. Steel. Res. (8)60, 1109-128. https://doi.org/10.1016/j.jcsr.2003.12.001
  7. Oehlers D.J. and Johnson R. P. (1987), "The Strength of Stud Shear Connections in Composite Beams", The Struct. Engr., 65B(2), 44-48.
  8. Oehlers D.J., Nguyen N.T., Ahmed M. and Bradford M.A. (1997), "Partial Interaction in Composite Steel and Concrete Beams with Full Shear Connection," J. Construct. Steel Res., 41(2-3), 235-248. https://doi.org/10.1016/S0143-974X(97)80892-9
  9. Oehlers D.J. and Bradford M.A. (1999), "Elementary Behavior of Composite Steel & Concrete Structural Members", Butterworth-Heinemannn, Oxford.
  10. Queiroz F.D., Vellasco, P.C.G.S. and Nethercot, D.A. (2006), "Finite element modeling of composite beams with full and partial shear connection", J, Constr. Steel. Res., 63(4), 505-521.
  11. Ranzi G. and Bradford M.A. (2007), "Composite beams with both longitudinal and transverse partial-interaction subjected to elevated temperatures", Eng. Struct., 29(10), 2737-2750. https://doi.org/10.1016/j.engstruct.2007.01.022
  12. Ranzi G. and Bradford M.A. (2009), "Nonlinear analysis of composite beams with partial shear interaction by means of the direct stiffness method", Steel. Comp. Struc., 9(2), 131-158. https://doi.org/10.1007/BF03249488
  13. Ryu H.K., Youn S.G., Bae D. and Chang S.P. (2005), "Estimation of Ultimate Strengths of Partial Shear Connection Composite Beams with Compact Section", Korea Society of Civil Engineers, 25(5A), 889-897.
  14. Shim C.S. (2004), "Experiments on Limit State Design of Large Stud Shear Connectors", KSCE J. Civil. Engi., 8(3), 313-318. https://doi.org/10.1007/BF02836013
  15. Da Silva V.D., Barros M.H.F.M., Julio E.N.B.S. and Ferreira C.C. (2009), "Closed form ultimate strength of multi-rectangle reinforced concrete sections under axial load and biaxial bending", Comp. Concrete., 6(6): 505-521. https://doi.org/10.12989/cac.2009.6.6.505

피인용 문헌

  1. Behavior of composite girder with Y-type perfobond rib shear connectors vol.103, 2014, https://doi.org/10.1016/j.jcsr.2014.09.012
  2. End-bearing resistance of Y-type perfobond rib according to rib width–height ratio vol.103, 2014, https://doi.org/10.1016/j.jcsr.2014.08.003
  3. Experimental shear resistance evaluation of Y-type perfobond rib shear connector vol.82, 2013, https://doi.org/10.1016/j.jcsr.2012.12.001
  4. Numerical and parametric studies on steel-elastic concrete composite structures vol.133, 2017, https://doi.org/10.1016/j.jcsr.2017.02.010
  5. Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.267
  6. Experimental and numerical studies on the seismic behavior of steel reinforced concrete compression-bending members with new-type section steel vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624320
  7. Cyclic test for solid steel reinforced concrete frames with special-shaped columns vol.7, pp.3, 2014, https://doi.org/10.12989/eas.2014.7.3.317
  8. Seismic behavior of steel reinforced concrete (SRC) joints with new-type section steel under cyclic loading vol.19, pp.6, 2015, https://doi.org/10.12989/scs.2015.19.6.1561
  9. Flexural stiffness of steel-concrete composite beam under positive moment vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1369
  10. Numerical analysis and horizontal bearing capacity of steel reinforced recycled concrete columns vol.22, pp.4, 2016, https://doi.org/10.12989/scs.2016.22.4.797
  11. Experimental study on mechanical performances of lattice steel reinforced concrete inner frame with irregular section columns vol.16, pp.3, 2014, https://doi.org/10.12989/scs.2014.16.3.253
  12. Behaviour of Corroded Single Stud Shear Connectors vol.10, pp.3, 2017, https://doi.org/10.3390/ma10030276
  13. Experimental investigation of steel-concrete composite beams with different degrees of shear connection under monotonic and fatigue loads vol.21, pp.2, 2018, https://doi.org/10.1177/1369433217717121
  14. Study on flexural capacity of simply supported steel-concrete composite beam vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.829
  15. Experimental investigation and design of corroded stud shear connectors vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624327
  16. Experimental and numerical study on static behavior of elastic concrete-steel composite beams vol.123, 2016, https://doi.org/10.1016/j.jcsr.2016.04.023
  17. Behaviour of steel-concrete composite beams using bolts as shear connectors vol.143, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/143/1/012027
  18. Research on Application of Uplift-Restricted Slip-Permitted (URSP) Connectors in Steel-Concrete Composite Frames vol.9, pp.11, 2019, https://doi.org/10.3390/app9112235
  19. Study of single perfobond rib with head stud shear connectors for a composite structure vol.71, pp.17, 2011, https://doi.org/10.1680/jmacr.18.00051
  20. The Composite Steel Reinforced Concrete Column Under Axial and Seismic Loads: A Review vol.19, pp.6, 2011, https://doi.org/10.1007/s13296-019-00257-9
  21. Experimental Study of Friction Resistance between Steel and Concrete in Prefabricated Composite Beam with High-Strength Frictional Bolt vol.2020, pp.None, 2011, https://doi.org/10.1155/2020/1292513
  22. Use of UHPC slab for continuous composite steel-concrete girders vol.34, pp.3, 2011, https://doi.org/10.12989/scs.2020.34.3.321
  23. Behavior of grouped stud shear connectors between precast high-strength concrete slabs and steel beams vol.34, pp.6, 2011, https://doi.org/10.12989/scs.2020.34.6.837
  24. Numerical study on the deflections of steel-concrete composite beams with partial interaction vol.38, pp.1, 2011, https://doi.org/10.12989/scs.2021.38.1.067