참고문헌
- Lyou, D. J., Hwang, J. Y. and Kim, S. C., "Property change during curing process of carbon fiber/epoxy composite," The Korean J. of Rheology, Vol. 6, No. 1, pp. 10-19, 1994.
- White, S. R. and Hahn, H. T., "Process modeling of composite materials : residual stress development during cure. part I. model formulation," J. of Composite Materials, Vol. 26, No. 16, pp. 2402-2422, 1992. https://doi.org/10.1177/002199839202601604
- White, S. R. and Hahn, H. T., "Process modeling of composite materials : residual stress development during cure. part II. model formulation," J. of Composite Materials, Vol. 26, No. 16, pp. 2423-2453, 1992. https://doi.org/10.1177/002199839202601605
- Kim, K. S. and Hahn, H. T., "Residual stress development during processing of graphite/epoxy composite," Compos. Sci. Technol., Vol. 36, No. 2, pp. 121-132, 1989. https://doi.org/10.1016/0266-3538(89)90083-3
- Bogetti, T. A., Gillespie, J. W. Jr., "Process induced stress and deformation in thick-section thermoset composite laminates," J. of Composite Materials, Vol. 26, No. 5, pp. 626-660, 1992. https://doi.org/10.1177/002199839202600502
- Zhu, Q., Geubelle, P. H., Li, M. and Tucker, C. L., "Dimensional accuracy of thermoset composites: simulation of process-induced residual stresses," J. of Composite Materials, Vol. 35, No. 24, pp. 2171-2205, 2001. https://doi.org/10.1177/002199801772662000
- Yi, S., Hilton, H. H. and Ahmad, M. F., "A finite element approach for cure simulation of thermosetting matrix composites," Comput. & Struct., Vol. 64, No. 1-4, pp. 383-388, 1997. https://doi.org/10.1016/S0045-7949(96)00156-3
- Song, M. J., Kim, H. K., Kang, J. J. and Kim, K. H., "A study on birefringence pattern induced in silicone lens molding for LED backlight packaging," Proc. of KSPE Spring Conference, pp. 217-218, 2009.
- Loos, A. C. and Springer, G. S., "Curing of epoxy matrix composites," J. of Composite Materials, Vol. 17, No. 2, pp. 135-169, 1983. https://doi.org/10.1177/002199838301700204
- Kamal, M. R and Sourour, S., "Kinetics and thermal characterization of thermoset cure," Pol. Eng. Science, Vol. 13, No. 1, pp. 59-64, 1973. https://doi.org/10.1002/pen.760130110
- Hu, G., Chew, S. and Singh, B., "Cure shrinkage analysis of green epoxy molding compound with application to warpage analysis in a plastic IC package," 8th International Conference on Electronic Packaging Technology, 2007.
- Saraswat, M. K., Jansen, K. M. B. and Ernst, L. J., "Cure shrinkage and bulk modulus determination for molding compounds," 1st Electronics System Integration Technology Conference, pp. 782-787, 2006.
-
Dow Corning
${\circledR}$ , "Data sheet of optical encapsulant," - Tsygankov, S. A. and Gol'dman, A. Y., "Changes in the elastic modulus of thermosetting polymers during curing," Polymer Science U.S.S.R., Vol. 21, No. 2, pp. 321-326, 1979. https://doi.org/10.1016/0032-3950(79)90248-X
- Rabearison, N., Jochum, C. and Grandidier, J. C., "A FEM coupling model for properties prediction during the curing of an epoxy matrix," Comp. Mat. Sci., Vol. 45, No. 3, pp. 715-724, 2009. https://doi.org/10.1016/j.commatsci.2008.11.007