한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

  • 제27권1호
  • /
  • Pages.25-34
  • /
  • 2011
  • /
  • 1229-2427(pISSN)
  • /
  • 2288-646X(eISSN)
한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

암반비탈면 붕괴시 예측가능한 AE의 적용성에 관한 연구

Applicability of AE for the Prediction of Rock Slope Failure

  • 이동근 (한양대학교 건설환경공학과) ;
  • 김연중 (한양대학교 건설환경공학과) ;
  • 김석천 ((주) 유경기술단) ;
  • 천병식 (한양대학교 건설환경공학과)
  • 투고 : 2010.06.14
  • 심사 : 2010.12.13
  • 발행 : 2011.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

비탈면의 계측은 현장 접근성이 떨어지고 장기적인 계측이 어려워 이론적이거나 경험에 의존하는 것이 일반적이기 때문에 재난, 재해에 대한 조짐을 예측하기란 매우 어려운 실정이다. 따라서 본 논문에서는 비탈면의 붕괴를 예측하는 효과적인 방법과 현장 적용성에 대한 내용을 실험적 연구를 실시한 내용을 다루었다. 비탈면의 붕괴를 예측하는 방법은 재료의 파괴시 발생되는 음파를 WEAD라 불리는 AE센서를 이용하여 지반분야에 적용함으로써 비탈면의 붕괴를 예측 할 수 있었다. 비탈면 붕괴시 발생되는 AE파라미터는 전단 실험과 휨 실험을 실시하여 확보하였고 이를 토대로 파괴기준을 마련하였다. 시험시공은 비탈면 붕괴이력이 있고 붕괴가능성이 존재하는 비탈면에 적용해 보았고 실험결과 AE파라미터는 파괴기준에 넘지 않아 안정한 것으로 나타났으며 실제 비탈면의 붕괴 증후는 없는 것으로 나타나 적용성이 우수한 것으로 분석되었다.

In general, many instrumentations of slope rely on theory or experience because on-site accessibility and long term instrumentation are difficult to conduct the instrumentation of slopes. Also the prediction of disaster is very difficult. Therefore experimental research was conducted about an effective method to predict collapse of slope and on-site applicability in this study. The collapse of slope was able to be predicted by applying AE sensor which we call WEAD to the failure criteria. The parameters of AE generated during the collapse of slope were secured through bending shear test. Test construction was applied to the slope with a history and a possibility of collapse. As a result, it is shown that AE parameters do not exceed the failure criterion and is found to be stable slopes. As the real symptoms of collapse did not appear, AE was found to have excellent applicability.

키워드

참고문헌

  1. 日本非破壊協会.(2006), アコースティク.エミッション試験１, pp.9.
  2. Colombo, Ing. S., Main, I. G., and Forde, M. C. (2003), "ssessing Damage of Reinforced Concrete Beam Using b-value Analysis of Acoustic Emission Signals," Journal of Materials in Civil Engineering, Vol.15, No.3, pp.280-286. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(280)
  3. Eberhardt, E., Stead, D., Stimpson, B., Read, R. S. (1997), "Changes in Acoustic Event Properties with Progressive Fracture Damage", Int. J. Rock. Mech. Min. Sci. & Geomech. Abstr., Vol.35, pp. 249-254.
  4. Goodman RE., Blake W. (1966), "Rock noise in landslides and slope failure." Highway Res Rec, 119:50.
  5. kisser, E.J. (1950), "A study of acoustic phenomena in tensile test Doctoral Thesis", Techische Hochshule Munchen.
  6. Li, C., Nordlund, E. (1993), "Assessment of Damage in Rock Using the Kaiser Effect of Acoustic Emission", Int. J. Rock. Mech. Min Sci & Geomech. Abstr., 30. 7, pp.943-946. https://doi.org/10.1016/0148-9062(93)90049-J
  7. Maji, A. K. and Shah, S. P. (1988), "rocess Zone and Acoustic Emission Measurement in Concrete," Experimental Mechanics, Vol.28, No.1, pp.27-33. https://doi.org/10.1007/BF02328992
  8. Mansurov, V. A. (1994), "Acoustic Emission from Failing Rock Behaviour", Rock Mech, Rock Eng, 27.3, pp.173-182. https://doi.org/10.1007/BF01020309
  9. Shiotani T. (2006), "Evaluation of long-term stability for rock slope by means of acoustic emission technique", NDT & E International, Vol.39, pp.217-228. https://doi.org/10.1016/j.ndteint.2005.07.005
  10. Pestman, B. J., Van Munster, J. G. (1996), "An Acoustic Emission study of Damage Development and Stress Memory Effects in Sandstone", Int. J. Rock. Mech. Min. Sci & Geomech. Abstr., 33.6, 585-593. https://doi.org/10.1016/0148-9062(96)00011-3
  11. Puri, S. (2003), "ssessing the Development of Localized Damage in Concrete under Compressive Loading Using Acoustic Emission," Purdue University, pp.111.
  12. Seto, M., Nag,D.K., Vutukuri, V. S. (1996), "Evaluation of rock mass damage using acoustic emission technique", Rock Fragementation by Blasting, pp.139-145.
  13. Shiotani T., Li Z., Yuyama S., Ohtsu M. (2001a), "Application of the AE improved b-value to quantitative evaluation of fracture process in concrete-materials.", J Acoust Emission, 19:118-3.
  14. Shiotani T., Ohtsu M., Ikeda K. (2001b) "Detection and evaluation of AE waves due to rock deformation." Construction Building Mater, Vol.15, 235-6. https://doi.org/10.1016/S0950-0618(00)00073-8
  15. Shiotani T., Ohtsu M., Vahaviolos SJ.(2003), "Acoustic emission: standards and technology update." ASTM STP 1353 pp.156-72.
  16. Yuda S., Hashimoto Y., Takahashi K., Kumagai M., Niitsuma H. and Chubachi N. (1984), "Prediction of Slope Failure by Acoustic Emission Technique," Progress in Acoustic Emission VII, JSNDI, pp.660-667.
  17. Yuyama, S., Okamoto, T., and Nagataki, S. (1994), "Acoustic Emission Evaluation of Structural Integrity in Repaired Reinforced Concrete Beams," Materials Evaluation, Vol.52, No.1, pp.86-90.