International Journal of Aeronautical and Space Sciences

  • 제12권1호
  • /
  • Pages.1-15
  • /
  • 2011
  • /
  • 2093-274X(pISSN)
  • /
  • 2093-2480(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

Research Advances on Tension Buckling Behaviour of Aerospace Structures: A Review

  • Datta, Prosun Kumar (Department of Aerospace Engineering, Indian Institute of Technology) ;
  • Biswas, Sauvik (Department of Aerospace Engineering, Indian Institute of Technology)
  • 발행 : 2011.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reviews most of the research done in the field of tensile buckling characteristics pertaining to aerospace structural elements with special attention to local buckling and parametric excitation due to periodic loading on plate and shell elements. The concepts of buckling in aerospace structures appear as the result of the application of a global compressive applied load or shear load. A less usual situation is the case, in which a global tensile stress creates buckling instability and the formation of complex spatial buckling pattern. In contrast to the case of a pure compression or shear load, here the applied macroscopic load has no compressive component and is thus globally stabilizing. The instability stems from a local compressive stress induced by the presence of a defect, such as a crack or a hole, due to partial or non-uniform applied load at the far end. This is referred to as tensile buckling. This paper discusses all aspects of tensile buckling, theoretical and experimental. Its far reaching applications causing local instability in aerospace structural components are discussed. The important effects on dynamic stability behaviour under locally induced periodic compression have been identified and influences of various parameters are discussed. Experimental results on simple and combination resonance characteristics on plate structures due to tensile buckling effects are elaborated.

키워드

참고문헌

  1. Backer, G. C. (1972). Static and Dynamic Behaviour of Tensioned Doubly Connected Plates. PhD Thesis, Georgia Institute of Technology.
  2. Bert, C. W. and Birman, V. (1988). Parametric instability of thick, orthotropic, circular cylindrical shells. Acta Mechanica, 71, 61-76. https://doi.org/10.1007/BF01173938
  3. Bolotin, V. V. (1964). The Dynamic Stability of Elastic Systems. San Francisco, CA: Holden-Day.
  4. Brock, J. E., Costello, R. G., and Pellet, D. A. (1968). Buckling of a tensioned panel containing circular hole. AIAA Journal, 6, 2012-2014. https://doi.org/10.2514/3.4918
  5. Carlson, R. L. (1974). An experimental study of the parametric excitation of a tensioned sheet with a cracklike opening - Results of experimental studies indicate that both principal and secondary regions of instability are developed. Experimental Mechanics, 14, 452-458. https://doi.org/10.1007/BF02324026
  6. Carlson, R. L., Zielsdorff, G. F., and Harrison, J. C. (1970). Buckling in thin cracked sheets. Proceedings of the Air Force Conference on Fatigue and Fracture of Aircraft Structures and Materials, Miami Beach, FL. pp. 193-205.
  7. Cherepanov, G. P. (1963). On the buckling under tension of a membrane containing holes. Journal of Applied Mathematics and Mechanics, 27, 405-420. https://doi.org/10.1016/0021-8928(63)90009-1
  8. Choo, Y. S. and Kim, J. H. (2000). Dynamic stability of rectangular plates subjected to pulsating follower forces. AIAA Journal, 38, 353-361. https://doi.org/10.2514/2.964
  9. Clarkson, B. L. (1965). The propagation of fatigue cracks in a tensioned plate subjected to acoustic loads. In W. J. Trapp and D. M. Forney, eds. Acoustical Fatigue in Aerospace Structures. Syracuse, NY: N. Y. Syracuse University Press. p. 361.
  10. Datta, P. K. (1976). An experimental study of the static and dynamic behaviour of a tensioned sheet with a rectangular opening. Aeronautical Quarterly, 27, 257-262. https://doi.org/10.1017/S0001925900007769
  11. Datta, P. K. (1978). An investigation of the buckling behaviour and parametric resonance phenomenon of a tensioned sheet with a central opening. Journal of Sound and Vibration, 58, 527-534. https://doi.org/10.1016/0022-460X(78)90358-9
  12. Datta, P. K. (1980). Nonlinear behaviour, under acoustic excitation, of a fuselage panel with a central opening. Transactions of the Canadian Society for Mechanical Engineering, 6, 234-239.
  13. Datta, P. K. (1981). An analogue simulation of the nonlinear vibration of a plate with a central opening subjected to tension loading. Journal of Mechanical Engineering Science, 23, 103-106. https://doi.org/10.1243/JMES_JOUR_1981_023_019_02
  14. Datta, P. K. (1982). Stability behavior of a thin plate with eccentric tensile loading. The Structural Engineer, Journal of the Institution of Structural Engineers, London, 60B, 43.
  15. Datta, P. K. (1983). Parametric instability of tensioned panels with central opening and edge slot. Proceedings of the 9th Canadian Congress of Applied Mechanics, Saskatchewan, Canada. pp. 99-100.
  16. Datta, P. K. and Carlson, R. L. (1973). Buckling and vibration of a thin tensioned sheet with an elliptical hole--The results of an analytical and experimental study of both the buckling and the vibration behavior of a thin sheet with an elliptical hole in a tensile field are presented. Experimental Mechanics, 13, 280-286. https://doi.org/10.1007/BF02322724
  17. Datta, P. K. and Deolasi, P. J. (1993). Static and dynamic behaviour of rectangular plates subjected to band loading at the centre (compression or tension). Proceedings of the 8th National Seminars on Aerospace Structures, Kharagpur, India. pp. 579-598.
  18. Datta, P. K. and Deolasi, P. J. (1995). Simple and combination parametric resonances of rectangular plates under partially distributed tensile loading with damping. Proceedings of the 15th Canadian Congress of Applied Mechanics, Victoria, Canada. pp. 276-277.
  19. Datta, P. K. and White, R. G. (1979). Static and dynamic response of an aluminium panel having a central opening with combined in-plane biaxial static loading and acoustic excitation. ISVR Technical Report No 103. Southampton, UK: University of Southampton.
  20. Datta, P. K. and White, R. G. (1980). Acoustic excitation of a panel having a central opening under biaxial tension. Aeronautical Journal, 84, 339-345.
  21. Deolasi, P. J. and Datta, P. K. (1995a). Effects of damping on the parametric instability behaviour of plates under localized edge loading (compression or tension). Structural Engineering and Mechanics, 3, 229-244. https://doi.org/10.12989/sem.1995.3.3.229
  22. Deolasi, P. J. and Datta, P. K. (1995b). Parametric instability characteristics of rectangular plates subjected to localized edge loading (compression or tension). Computers and Structures, 54, 73-82. https://doi.org/10.1016/0045-7949(94)E0277-9
  23. Deolasi, P. J. and Datta, P. K. (1997a). Experiments on the parametric vibration response of plates under tensile loading. Experimental Mechanics, 37, 56-61. https://doi.org/10.1007/BF02328750
  24. Deolasi, P. J. and Datta, P. K. (1997b). Simple and combination resonances of rectangular plates subjected to non-uniform edge loading with damping. Engineering Structures, 19, 1011-1017. https://doi.org/10.1016/S0141-0296(97)00128-4
  25. Deolasi, P. J., Datta, P. K., and Prabhakara, D. L. (1995). Buckling and vibration of rectangular plates subjected to partial edge loading (compression or tension). Journal of Structural Engineering, 22, 135-144.
  26. Dixon, J. R. (1960). Computed values of the elastic stresses in an infinite plate under tension. NEL Report No 12. Glasgow, UK: National Engineering Laboratory.
  27. Dixon, J. R. and Strannigan, J. S. (1969). Stress distribution and buckling in thin sheets with central slits. Proceedings of the 2nd International Conference on Fracture, Brighton, England. pp. 105-118.
  28. Evan-Iwanowski, R. M. (1976). Resonance Oscillations in Mechanical Systems. Amsterdam: Elsevier Scientific Publishing.
  29. Gilabert, A., Sibillot, P., Sornette, D., Vanneste, C., Maugis, D., and Muttin, F. (1992). Buckling instability and pattern around holes or cracks in thin plates under a tensile load. European Journal of Mechanics and Solids, 11, 65-89.
  30. Inglis, C. E. (1913). Stress in a plate due to presence of cracks and sharp corners. Transactions of Institute of Naval Architects (London), 55, 219-241.
  31. Joga Rao, C. V. and Picket, G. (1961). Vibration of plates of irregular shapes and plates with holes. Journal of the Aeronautical Society of India, 13, 83-88.
  32. Kirsch, G. (1898). Die Theorie der elastizitat und die bedurfnisse der festigkeitslehre. Zeitschrift des Vereins Deutscher Ingenieure, 42, 797-807.
  33. Larsson, P. L. (1989). On buckling of orthotropic stretched plates with circular holes. Composite Structures, 11, 121-134. https://doi.org/10.1016/0263-8223(89)90064-0
  34. Lee, H. P. and Lim, S. P. (1992). Free vibration of isotropic and orthotropic square plates with square cutouts subjected to in-plane forces. Computers and Structures, 43, 431-437. https://doi.org/10.1016/0045-7949(92)90276-6
  35. Markstrom, K. and Stoakers, B. (1980). Buckling of cracked members under tension. International Journal of Solids and Structures, 16, 217-229. https://doi.org/10.1016/0020-7683(80)90075-X
  36. Nayfeh, A. H. and Mook, D. T. (1979). Nonlinear Oscillations. New York: Wiley.
  37. Ostiguy, G. L., Samson, L. P., and Nguyen, H. (1993). On the occurrence of simultaneous resonances in parametrically-excited rectangular plates. Journal of Vibration and Acoustics, 115, 344-352. https://doi.org/10.1115/1.2930355
  38. Petyt, M. (1968). The vibration characteristics of a tensioned plate containing a fatigue crack. Journal of Sound and Vibration, 8, 377-389. https://doi.org/10.1016/0022-460X(68)90244-7
  39. Picket, G. (1964). Bending, buckling and vibration of plates with holes. Proceedings of the 2nd Southeastern Conference on Theoretical and Applied Mechanics, Atlanta, GA.
  40. Prabhakara, D. L. and Datta, P. K. (1993). Buckling and vibration of square plates with centrally located rectangular slots subjected to inplane edge loading (tension or compresion). Proceedings of the 8th National Seminars on Aerospace Structures, Kharagpur, India. pp. 547-563.
  41. Prabhakara, D. L. and Datta, P. K. (1996a). Static and dynamic behaviour of square plates with inhomogeneity subjected to non-uniform edge loading (compression and tension). Structural Engineering and Mechanics, 4, 163-176. https://doi.org/10.12989/sem.1996.4.2.163
  42. Prabhakara, D. L. and Datta, P. K. (1996b). Static and dynamic elastic behaviour of damaged plates subjected to local inplane loads. Marine Structures, 9, 811-818. https://doi.org/10.1016/0951-8339(95)00021-6
  43. Prabhakara, D. L. and Datta, P. K. (1997). Vibration, Buckling and Parametric Instability Behaviour of Plates with Centrally Located Cutouts Subjected to In-Plane Edge Loading (Tension or Compression). Thin-Walled Structures, 27, 287-310. https://doi.org/10.1016/S0263-8231(96)00033-X
  44. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2002a). Tension buckling and vibration behaviour of curved panels. Proceedings of the 2nd International Conference on Structural Stability and Dynamics, Singapore.
  45. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2002b). Tension buckling and vibration behaviour of curved panels subjected to non-uniform in-plane edge loading. International Journal of Structural Stability and Dynamics, 2, 409-423. https://doi.org/10.1142/S0219455402000579
  46. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2003a). Buckling behaviour of laminated composite cylindrical curved panel subjected to biaxial non-uniform edge loading. Proceedings of the Annual Symposium of Aeronautical Society of India, Kolkata, India.
  47. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2003b). Dynamic instability characteristics of laminated composite plates subjected to partial follower edge load with damping. International Journal of Mechanical Sciences, 45, 1429-1448. https://doi.org/10.1016/j.ijmecsci.2003.10.008
  48. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2003c). Tension buckling and dynamic stability behaviour of laminated composite doubly curved panels subjected to partial edge loading. Composite Structures, 60, 171-181. https://doi.org/10.1016/S0263-8223(02)00314-8
  49. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2004a). Dynamic stability analysis of square isotropic/laminated composite plates with circular cutout subjected to nonuniform follower edge loading. Journal of Aerospace Sciences and Technologies, 56, 227-239.
  50. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2004b). Effect of aspect ratio and boundary conditions on dynamic stability behaviour of doubly curved panels subjected to follower loading with damping. Proceedings of the 18th National Seminars on Aerospace Structures, Kanpur, India. pp. 190-196.
  51. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2005). Dynamic instability characteristics of laminated composite doubly curved panels subjected to partially distributed follower edge loading. International Journal of Solids and Structures, 42, 2243-2264. https://doi.org/10.1016/j.ijsolstr.2004.09.024
  52. Ravi Kumar, L., Datta, P. K., and Prabhakara, D. L. (2006). Effect of aspect ratio and boundary conditions on tension buckling behaviour of curved panels subjected to nonuniform in-plane edge loading. Journal of the Institution of Engineers (India): Aerospace Engineering Journal, 87, 12-16.
  53. Reddy, J. N. and Phan, N. D. (1985). Stability and vibration of isotropic, orthotropic and laminated plates according to a higher-order shear deformation theory. Journal of Sound and Vibration, 98, 157-170. https://doi.org/10.1016/0022-460X(85)90383-9
  54. Ritchie, D. and Rhodes, J. (1975). Buckling and postbuckling behaviour of plates with holes. Aeronautical Quarterly, 26, 281-296. https://doi.org/10.1017/S0001925900007435
  55. Sabir, A. B. and Chow, F. Y. (1983). Elastic buckling of flat panels containing circular and square holes. In J. Morris Linden, ed. Instability and Plastic Collapse of Steel Structures, Proceedings of The Michael R Horne Conference. Manchester, England: Dobbs Ferry. pp. 311-321.
  56. Shimizu, S. and Yoshida, S. (1991). Strength of plates with a hole under tensile loading. Proceedings of the International Conference on Steel and Aluminium Structures, Singapore. pp. 501-510.
  57. Shimizu, S., Yoshida, S., and Enomoto, N. (1991). Buckling of plates with a hole under tension. Thin-Walled Structures, 12, 35-49. https://doi.org/10.1016/0263-8231(91)90025-E
  58. Sih, G. C. and Lee, Y. D. (1986). Tensile and compressive buckling of plates weakened by cracks. Theoretical and Applied Fracture Mechanics, 6, 129-138. https://doi.org/10.1016/0167-8442(86)90033-9
  59. Somerset, J. H. and Evan-Iwanoski, R. M. (1966). Experiments on large amplitude vibrations of rectangular plates. Developments in Theoretical and Applied Mechanics, 3, 331-335.
  60. Tani, J. and Nakamura, T. (1978). Dynamic instability of annular plates under periodic radial loads. Journal of the Acoustical Society of America, 64, 827-831. https://doi.org/10.1121/1.382030
  61. Timoshenko, S. and Goodier, J. N. (1951). Theory of Elasticity. 2nd ed. New York: McGraw-Hill.
  62. Timoshenko, S. and Gere, J. M. (1961). Theory of Elastic Stability. 2nd ed. New York: McGraw-Hill.
  63. Udar, R. S. and Datta, P. K. (2007). Dynamic analysis of parametrically excited laminated composite curved panels under non-uniform edge loading with damping. Composite Structures, 79, 356-368. https://doi.org/10.1016/j.compstruct.2006.01.013
  64. Udar, R. S. and Datta, P. K. (2008). Combination resonance instability of curved panels with cutout subjected to nonuniform loading with damping. Journal of Engineering Mechanics, 134, 555-566. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:7(555)
  65. Yettram, A. L. and Brown, C. J. (1985). The elastic stability of square perforated plates. Computers and Structures, 21, 1267-1272. https://doi.org/10.1016/0045-7949(85)90180-4
  66. Zielsdorff, G. F. (1971). An Investigation of the Out-of-Plane Deflection Behaviour of Thin Sheets in a Tensile Field [Technical Report]. Atlanta, GA: School of Aerospace Engineering, Georgia Institute of Technology.
  67. Zielsdorff, G. F. and Carlson, R. L. (1972a). On moderately large deflection of multi-ply connected plates. Journal of Aeronautical Society of India, 24, 425.
  68. Zielsdorff, G. F. and Carlson, R. L. (1972b). On the buckling of thin tensioned sheets with cracks and slots. Engineering Fracture Mechanics, 4, 939-950. https://doi.org/10.1016/0013-7944(72)90027-6

피인용 문헌

  1. Dynamical stability and parametrical vibrations of the laminated plates with complex shape vol.10, pp.1, 2013, https://doi.org/10.1590/S1679-78252013000100017
  2. Peculiarities in the Material Design of Buckling Resistance for Tensioned Laminated Composite Panels with Elliptical Cut-Outs vol.11, pp.6, 2018, https://doi.org/10.3390/ma11061019
  3. Vibration analysis of laminated functionally graded shallow shells with clamped cutout of the complex form by the Ritz method and the R-functions theory vol.16, pp.1, 2019, https://doi.org/10.1590/1679-78254911