Abstract
In this study, a piezoelectric smart sensor that can be embedded inside of concrete structures is developed to investigate the early stage of concrete curing. A waterproof coating is used to protect the piezoelectric sensor from moistures of concrete mixture. Also, a mortar case is utilized to encapsulate the sensor to protect it from impact loads. To estimate the strength of concrete, a self-sense guided-wave actuated sensing technique is applied. In the guided wave, its velocity is varied according to the mechanical properties of concrete such as modulus of elasticity. Because modulus of elasticity directly affects the strength of concrete, the guidedwave's velocity also affects the concrete strength development. To verify the feasibility of using the proposed approach, the smart sensor was embedded into a 100MPa concrete cylinder and the self-sense guided wave is continuously measured throughout the curing process. The measurements showed that the propagation time (TOF) of the measured guided waves gradually decreased as the curing age increased. Especially, at the early age of the curing process, the variation of the TOF was very significant. Furthermore, the results showed that there is a linear relationship between the TOF of the self-sense guided waves and the strength of concrete existed. It is safe to conclude that the proposed approach can be used very effectively in monitoring of the strength development of high strength concrete structures.
이 논문은 고강도 콘크리트의 양생 강도 발현을 모니터링하기 위하여 콘크리트 내부에 매립이 가능한 지능형 센서를 제작하고 제작된 지능형 센서를 이용하여 콘크리트 내부의 유도 초음파 전달 시간을 측정함으로써, 콘크리트의 양생 강도를 실시간 추정할 수 있는 기법을 보여준다. 압전 소자를 콘크리트 내부에 삽입하는데 있어, 콘크리트의 수화열과 양생 시의 미세 변형으로부터 보호되어야 하므로, 방수 코팅과 모르타르 케이싱을 하였으며 이렇게 제작된 지능형 센서로부터 저비용의 셀프 센싱 기반 유도 초음파를 계측하여 콘크리트 내부의 유도 초음파 전달 시간을 모니터링하는 기법을 제안하였다. 콘크리트의 양생이 진행됨에 따라 콘크리트의 강도가 증가하게 되는데, 이는 즉 콘크리트의 탄성 계수가 증가하기 때문이며 이로 인해, 유도 초음파의 전달 시간이 빨라지는 것이므로, 이를 측정하여 콘크리트 양생 강도를 추정할 수 있게 된다. 제안된 기법의 적용가능성을 검증하기 위하여 설계 압축강도 100 MPa의 공시체 내부에 지능형 센서를 매립하고 양생기간 동안 유도 초음파를 측정, 비교 분석하였다. 유도 초음파 신호는 양생이 진행됨에 따라 더 빠르게 전달되었으며, 특히 강도 변화가 급격하게 일어나는 초기 재령에서의 유도 초음파 전달속도 변화가 가장 크게 나타났고 그 이후로 점차 감소하는 경향을 보여주었다. 또한, 유도 초음파 전달 시간과 강도 사이의 선형 상관관계를 이용하여 유도 초음파의 전달 시간을 이용해 발현강도를 추정하는 콘크리트 양생강도 추정식을 제안하였다. 결과적으로 이 연구를 통해 개발된 매립형 지능형 센서를 이용하여 고강도 콘크리트의 양생 강도를 실시간 모니터링할 수 있음이 검증되었다.