전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제60권5호
  • /
  • Pages.949-954
  • /
  • 2011
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

극수/슬롯수 조합에 따른 Radial Vibration Force 고려한 매입자석 동기모터 특성 연구

Study on Machine Characteristics in Interior Permanent Magnet Synchronous Motor According to Pole/Slot Combinations with Radial Vibration Force Consideration

  • 방량 (한양대 공대 자동차공학과) ;
  • 이수진 (한양대 공대 자동차공학과) ;
  • 이병화 (한양대 공대 자동차공학과) ;
  • 홍정표 (한양대 공대 자동차공학과)
  • 투고 : 2011.01.01
  • 심사 : 2011.04.02
  • 발행 : 2011.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a comparative study on motor characteristics with specific consideration of radial vibration force in interior permanent magnet synchronous motors (IPMSM) according to pole/slot combinations. Three IPMSM models, 16-pole/15-slot design, 16-pole/18-slot design and 16-pole/24-slot design are built, in which 16-pole/15-slot and 16-pole/18-slot designs provide high winding factor and 16-pole/24-slot design is known as a general pole/slot combination. By coupling finite element analysis (FEA) with equivalent circuit method, motor characteristics, back electro-motive force (Back-EMF), inductances, cogging torque, etc. as well as machine output performances are analyzed and compared. The radial vibration force (RVF) distribution in air gap causing stator vibration and noise is interested. It is expected that this study help with appropriate choice of pole/slot combination in IPMSM design.

키워드

참고문헌

  1. Shigeo Morimoto, Yoji Takeda, "Machine Parameters and Performance of Interior Permanent Magnet Synchronous Motors with Different Permanent Volume'', Electrical Engineering in Japan, vol. 131, No. 4, 2000.
  2. Freddy Magnussen, Chandur Sadarangani, "Winding Factors and Joule Losses of Permanent Magnet Machines with concentrated Windings", Electric Machines and Drives Conference(IEMDC'03), vol. 1, pp. 333-339, June 2002.
  3. Takeda et al. Control schemes for PM motor and comparative characteristic of various rotor designs. Dengakuron; 114-D:662, 1994.
  4. Sung-Il Kim, Ji-Young Lee, Young-Kyoun Kim, Jung-Pyo Hong, Yoon Hur, Yeon-Hwan Jung, "Optimization for Reduction of Torque Ripple in Interior Permanent Magnet Motor by Using the Taguchi Method", IEEE Transactions on Magnetics, vol. 41, No. 5, May. 2005.
  5. Pia Salminen, Markku Niemelä and Juha Pyrhönen, Juhani Mantere, "Performance analysis of fractional slot wound PM motors for low speed applications", IEEE Industry Applications Society Annual Meeting, Oct., 2004.

피인용 문헌

  1. Technical trend of Design & Analysis for Electric motor using CAE vol.9, pp.1, 2012, https://doi.org/10.7839/ksfc.2012.9.1.077