References
- S. J. Lee, S. Mukerjee, J. McBreen, Y. W. Rho, Y. T. Kho, and T. H. Lee, "Effects of Nafion impregnation on performances of PEMFC electrodes", Electrochimica Acta, 43, 3693 (1998). https://doi.org/10.1016/S0013-4686(98)00127-3
- R. K. Ahluwalia, X. Wang, A. Rousseau, and R. Kumar, "Fuel economy of hydrogen fuel cell vehicles", J. Power Sources, 130, 192 (2004). https://doi.org/10.1016/j.jpowsour.2003.12.061
- M. A. Hickner, H. Ghassemi, Y. S. Kim, B. R. Einsla, and J. E. McGrath, "Alternative Polymer Systems for Proton Exchange Membranes (PEMs)", Chem. Rev., 104, 4587 (2004). https://doi.org/10.1021/cr020711a
- K. D. Kreuer, "On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells", J. Membr. Sci., 185, 29 (2001). https://doi.org/10.1016/S0376-7388(00)00632-3
- O. Savadogo, "Emerging membrane for electrochemical system: (I) solide polymer electrolyte membranes for fuel cell systems", J. New. Mat. Electrochem. Systems, 1, 47 (1998).
- L. Li and Y. Wang, "Sulfonated polyethersulfone Cardo membranes for direct methanol fuel cell", J. Membr. Sci., 246, 167 (2005). https://doi.org/10.1016/j.memsci.2004.08.015
- F. Wang, M. Hickner, Y. S. Kim, T. A. Zawodzinski, and J. E. McGrath, "Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes", J. Membr. Sci., 197, 231 (2002). https://doi.org/10.1016/S0376-7388(01)00620-2
- Y. Yang, Z. Shi, and S. Holdcroft, "Synthesis of sulfonated polysulfone-block-PVDF copolymers: enhancement of proton conductivity in low ion exchange capacity membranes", Macromolecules, 37, 1678 (2004). https://doi.org/10.1021/ma035659e
- D. S. Kim, H. B. Park, and Y. M. Lee, "Synthesis of sulfonated poly(imidoaryl ether sulfone) membranes for polymer electrolyte membrane fuel cell", J. Polym. Sci. Part A: Polym. Chem., 43, 5620 (2005). https://doi.org/10.1002/pola.21066
- K. S. Yoon, J. H. Choi, J. K. Choi, S. K. Hong, Y. T. Hong, and H. S. Byun, "Fabrication and Characteristics of Partially Covalent-crosslinked Poly(arylene ether sulfon)s Use in a Fuel Cell", Membrane Journal, 18, 274, (2008).
- M. Rikukawa and K. Sanui, "Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers", Prog. Polym. Sci., 25, 1463 (2000). https://doi.org/10.1016/S0079-6700(00)00032-0
- M. Gil, X. Ji, X. Li, H. Na, J. E. Hampsey, and Y. Lu, "Direct synthesis of sulfonated aromatic poly(ether ether ketone) proton exchange membranes for fuel cell applications", J. Membr. Sci., 234, 75 (2004). https://doi.org/10.1016/j.memsci.2003.12.021
- P. Xing, G. P. Robertson, M. D. Guiver, S. D. Mikhailenko, K. Wang, and S. Kaliaguine, "Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes", J. Membr. Sci., 229, 95 (2004). https://doi.org/10.1016/j.memsci.2003.09.019
- K. Miyatake, H. Zhou, T. Matsuo, H. Uchida, and M. Watanabe, "Proton conductive polyimide electrolytes containing trifluoromethyl groups: synthesis, properties, and DMFC performance", Macromolecules, 37, 4961 (2004). https://doi.org/10.1021/ma049547e
- C. Geniesa, R. Merciera, B. Silliona, N. Cornetb, G. Gebelb, and M. Pineric, "Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranes", Polymer, 42, 359 (2001). https://doi.org/10.1016/S0032-3861(00)00384-0
- H. Ghassemi, J. E. McGrath, and T. A. Zawodzinski Jr., "Multiblock sulfonated-fluorinated poly(arylene ether)s for a proton exchange membrane fuel cell", Polymer, 47, 4132 (2006). https://doi.org/10.1016/j.polymer.2006.02.038
- M. Sankir, Y. S. Kim, B. S. Pivovar, and J. E. McGrath, "Proton exchange membrane for DMFC and H2/air fuel cells: Synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers", J. Membr. Sci., 299, 8 (2007). https://doi.org/10.1016/j.memsci.2007.04.004
- N. Y. Arnett, W. L. Harrison, A. S. Badami, A. Roy, O. Lane, F. Cromer, L. Dong, and J. E. McGrath, "Hydrocarbon and partially fluorinated sulfonated copolymer blends as functional membranes for proton exchange membrane fuel cells", J. Power Sources, 172, 20 (2007). https://doi.org/10.1016/j.jpowsour.2007.04.051
- Y. Li, A. Roy, A. S. Badami, M. Hill, J. Yang, S. Dunn, and J. E. McGrath, "Synthesis and characterization of partially fluorinated hydrophobic-hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane", J. Power Sources, 172, 30 (2007). https://doi.org/10.1016/j.jpowsour.2007.04.046
- K. B. Wiles, C. M. de Diego, J. de Abajo, and J. E. McGrath, "Directly copolymerized partially fluorinated disulfonated poly(arylene ether sulfone) random copolymers for PEM fuel cell systems: Synthesis, fabrication and characterization of membranes and membrane-electrode assemblies for fuel cell applications", J. Membr. Sci., 294, 22 (2007). https://doi.org/10.1016/j.memsci.2007.01.036
- B. J. Chang, D. J. Kim, J. H. Kim, S. B. Lee, and H. J. Joo, "Sulfonated poly(fluorene-co-sulfone) ether membranes containing perfluorocyclobutane groups for fuel cell applications", J. Membr. Sci., 325, 989 (2008). https://doi.org/10.1016/j.memsci.2008.09.036
- J. W. Park, B. J. Chang, J. H. Kim, and Y. T. Lee, "Preparation and characteristics of partially fluorinated-sulfonated poly(biphenylene-co-sulfone)ether membranes for polymer electrolyte membrane fuel cell" Polymer (Korea), 34, 137 (2010).
- M. C. Yoo, B. J. Chang, J. H. Kim, S. B. Lee, and Y. T. Lee, "Sulfonated perfluorocyclobutyl biphenylene polymer electroryte membrane for fuel cell", Membrane Journal, 15, 355, (2005).
- N. Takimoto, S. Takamuki, M. Abe, A. Ohira, H. S. Lee, and J. E. Mcgrath, "Conductive area ratio of multiblock copolymer electrolyte membranes evaluated by e-AFM and its impact on fuel cell performance", J. Power Sources, 194, 662 (2009). https://doi.org/10.1016/j.jpowsour.2009.06.045
- A. Roy, H. S. Lee, and J. E. McGrath, "Hydrophilic -hydrophobic multiblock copolymers based on poly(arylene ether sulfone)s as novel proton exchange membranes", J. Polym. Sci. Part B: Polym. Chem., 49, 5037, (2008).
- L. E. Karlsson and P. Jannasch, "Polysulfone ionomers for proton-conducting fuel cell membranes: sulfoalkylated polysulfones", J. Membr. Sci., 230, 61 (2004). https://doi.org/10.1016/j.memsci.2003.10.033
- T. B. Norsten, M. D. Guiver, J. Murphy, T. Astill, T. Navessin, S. Holdcroft, B. L. Frankamp, V. M. Rotello, and J. Ding, "Highly fluorinated combshaped copolymers as proton exchange membranes (PEMs): Improving PEM properties through rational design", Adv. Funct. Mater., 16, 1814 (2006).
- Z. Li, J. Ding, G. P. Robertson, and M. D. Guiver, "A novel bisphenol monomer with grafting capability and the resulting poly(arylene ether sulfone)s", Macromolecules, 39, 6990 (2006). https://doi.org/10.1021/ma061054h
- S. Matsumura, A. R. Hlil, N. Du, C. Lepiller, J. Gaudet, D. Guay, Z. Shi, S. Holdcroft, and A. S. Hay, "Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end-groups: Novel branched poly(ether-ketone)s with 3,6-ditrityl-9H-carbazole end-groups", J. Polym. Sci. Part A: Polym. Chem., 46, 3860 (2008). https://doi.org/10.1002/pola.22690
- S. Matsumura, A. R. Hlil, C. Lepiller, J. Gaudet, D. Guay, Z. Shi, S. Holdcroft, and A. S. Hay, "Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end-groups: Novel branched poly(ether-ketone)s", Macromolecules, 41, 281 (2008). https://doi.org/10.1021/ma071422x
- H. S. Park, D. W. Seo, S. W. Choi, Y. G. Jeong, J. H. Lee, D. I. Kim, and W. G. Kim, "Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications", J. Polym. Sci. Part A: Polym. Chem., 46, 1792 (2008). https://doi.org/10.1002/pola.22522
- J. K. Koh, J. K. Choi, J. T. Park, J. H. Goh, and J. H. Kim, "Preparation and Characterization of Proton Conducting Crosslinked Membranes Based On Poly(vinyl chloride) Graft Copolymer", Membrane Journal, 18, 261 (2008).
- D. W. Smith Jr., D. A. Babb, H. V. Shah, A. Hoeglund, R. Traiphol, D. Perahia, H. W. Boone, C. Langhoff, and M. Radler, "Perfluorocyclobutane (PFCB) polyaryl ethers: versatile coatings materials", J. Fluorine Chem., 104, 109 (2000). https://doi.org/10.1016/S0022-1139(00)00233-5
- S. Wong, H. Ma, A. K. Y. Jen, R. Barto, and C. W. Frank, "Highly fluorinated trifluorovinyl aryl ether monomers and perfluorocyclobutane aromatic ether polymers for optical waveguide applications", Macromolecules, 36, 8001 (2003). https://doi.org/10.1021/ma034467g
- X. Shang, S. Tian, L. Kong, and Y. Meng, "Synthesis and characterization of sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane", J. Membr. Sci., 266, 94 (2005). https://doi.org/10.1016/j.memsci.2005.05.014
- D. A. Babb, B. R. Ezzell, K. S. Clement, W. F. Richey, and A. P. Kennedy, "Perfluorocyclobutane aromatic ether polymers", J. Polym. Sci., Part A: Polym. Chem., 31, 3465 (1995).
- A. P. Kennedy, D. A. Babb, J. N. Bremmer, and A. J. Pasztor Jr., "Perfluorocyclobutane aromatic ether polymers. II. thermal/oxidative stability and decomposition of a thermoset polymer", J. Polym. Sci. Part A: Polym. Chem., 33, 1859 (1995). https://doi.org/10.1002/pola.1995.080331113
- A. S. Badami, O. Lane, H. S. Lee, A. Roy, and J. E. McGrath, "Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic-hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells", J. Membr. Sci., 333, 1 (2009). https://doi.org/10.1016/j.memsci.2008.12.066
- T. Erdogan, E. E. Unveren, T. Y. Inan, and B. Birkan, "Well-defined block copolymer ionomers and their blend membranes for proton exchange membrane fuel cell", J. Membr. Sci., 344, 172, (2009). https://doi.org/10.1016/j.memsci.2009.07.048