신재생에너지 (New & Renewable Energy)

  • 제7권3호
  • /
  • Pages.74-82
  • /
  • 2011
  • /
  • 1738-3935(pISSN)
  • /
  • 2713-9999(eISSN)
한국신·재생에너지학회 (Korean Society for New and Renewable Energy)
권호 표지
DOI QR코드

DOI QR Code

슬라이딩 모드제어 기법을 이용한 풍력 터빈의 최대 출력 제어 방법에 대한 검토

Examination on the Maximum-Cp Control of Wind Turbine by Sliding Mode Control

  • 신윤호 (한국기계연구원 시스템다이나믹스실) ;
  • 문석준 (한국기계연구원 시스템다이나믹스연구실) ;
  • 남용윤 (한국기계연구원 시스템신뢰성연구실) ;
  • 김창현 (한국기계연구원 자기부상연구실) ;
  • 류지윤 ((주)유니슨 풍력연구소)
  • 투고 : 2011.07.15
  • 심사 : 2011.08.22
  • 발행 : 2011.09.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Because concern on the problem of the limited energy is growing and the wind energy is considered as one of the biggest solutions, the researches on the wind energy and turbine are accomplished vigorously. The simulation tools on the non-linear characteristics of wind turbine system are various and it could describe the non-linear characteristics well but, the tool and methodology to apply non-linear control theory rarely exist. In this paper, the application procedure of sliding mode control theory to 2-DOF non-linear wind turbine system is suggested and the application results of it are also shown as compared with a torque loop control theory.

키워드

참고문헌

  1. Yoon-Su Nam, "Wind Turbine Control", GS InterVision, ISBN 978-89-93668-33-9, 2009.
  2. Henrik Bindner, "Active Control: Wind Turbine Model", Riso-R-920(EN) pp.1-32, 1999.
  3. Dewey H. Hodges & Mayuresh Patil, "Multi-Flexible- Body Analysis for Application to Wind-Turbine Control Design", 19th ASME Wind Energy Symposium, Jan. 10-13, 2000.
  4. L. Hannefors & H.P. Nee, "Model-based Current Control of AC Machines Using the Internal Model Control Method", IEEE Trans, Ind. Applicat., Vol. 34, No. 1, pp. 133-141, Jan./Feb. 1998. https://doi.org/10.1109/28.658735
  5. W.S. Kim, G.H. Sim, K.B. Lee, B.C. Jeong, S.H. Song, "Sliding-mode Based Direct Power Control of a Doubly Fed Induction Generator for Wind Turbines", Trans. of KIPE, Vol. 13, No. 2, pp. 152-162, 2008.
  6. Garrad Hassan & Partners Ltd., "Bladed User Manual Version 4.0", 2010.
  7. Jason M. Jonkman, Marshall L. Buhl Jr., "FAST User's Guide", Technical Report of NREL, 2005.
  8. International Electrotechnical Commision, "Wind Turbine Generator Systems, Part 1: Safety Requirements", IEC 61400-1, 2005.
  9. Iulian Menteanu, Antonetal Luliana Bratcu, Nicolaos- Antonio Cutululis, Emil Ceanga, "Optimal Control of Wind Energy Systems", Springer, ISBN 978-1-84996-724-2, 2010.
  10. Jean-Jacques E, Slotine, Weiping Li, "Applied Nonlinear Control", Prentice-Hall Inc., ISBN 0-13-040049-1, 1991.

피인용 문헌

  1. Derivation of 4 degrees of freedom nonlinear wind turbine model using effective mass and stiffness for simulation of control algorithm vol.5, pp.5, 2011, https://doi.org/10.1063/1.4826703