DOI QR코드

DOI QR Code

Economic Order Quantity(EOQ) Determination Process for Construction Material considering Demand Variation and Stockyard Availability

일일 수요량 변동성과 가용야적면적을 고려한 건설 자재의 경제적주문량(EOQ) 산정 프로세스

  • Received : 2010.07.15
  • Accepted : 2010.10.27
  • Published : 2011.01.31

Abstract

Part of material and inventory management is one of important factor for business interests. But importance of material and inventory management in domestic construction project has been relatively devalued. The existing study of inventory has been studied with limited individual factor about inventory management. Therefore construction material management needs improvement via an accurate prediction with whole and systematic process viewpoint. and existing theory of material and inventory introduction to construction from manufacturing needs reflecting characteristics about construction project. This paper suggests material management process for economic material management. This paper to make a unit curtain wall of case construction project comparison between total cost of existing material management process and total cost of economic order quantity of proposal material management process To verify usefulness of order point and order quantity determination process.

자재 및 재고관리에 관한 부분은 전 산업 분야에서 기업의 이익을 위해 고려되는 주요 요소 중 하나이지만 국내 건설 프로젝트에서는 조달 관리의 중요성이 상대적으로 평가절하 되어왔고 기존의 재고관리에 관한 연구는 개별 요소로 한정되어 많이 연구되었으며 제조업의 이론을 도입하는 단계에 머물렀다. 따라서 건설 프로젝트의 자재 및 재고관리를 전체적인 프로세스 관점에서 바라보고 개선하며 기존 이론의 도입에 더하여 건설 프로젝트 특성 반영이 필요하다. 본 연구에서는 계획 단계의 현장 관점에서 야적장의 면적과 재고량을 이용하여 경제적주문량을 결정하는 자재관리 프로세스를 제안하고 이를 건설 현장의 기존 프로세스와 비교하여 그 유용성을 검증하였다.

Keywords

References

  1. 강현구, 하영서, 임철우, 김창덕, 유정호(2008)." RFID 기술적용에 따른 유닛타입 커튼월 공사의 효율성 분석", 제9권, 제3호, 한국건설관리학회 눈문집, pp. 206-213.
  2. 김길선, 김재환, 김의탁, 서창적, 어윤양, 유시정, 우한주, 황복주 (2004). 디지털 시대의 생산시스템과 SCM, 범문사,
  3. 박대홍, 김재준, 이현수(2001)," 건설현장자원소요예측시스템에 관한 연구", 제17권, 제11호, 대한건축학회 논문집, pp97-105.
  4. 송영웅, 최윤기(2003)," 비용 일정 통합관리를 이용한 자원 소요 계획에 관한 연구", 제4권, 제1호, 한국건설관리학회 논문집, pp106-113.
  5. 윤상국(2001)." JIT 구매와 가격 할인이 있는 EOQ의 재고 비용에 대한 비교 분석", 석사학위논문
  6. 이상범 (2004)." 건설자재의 적정 리드타임 산정에 관한 연구", 제4권, 제1호, 한국건축시공학회 논문집, pp. 105-110.
  7. 이재명, 김창덕, 유정호 (2007)," 야적장 크기를 고려한 철근의 경제적 주문량(EOQ) 산정, 한국건설관리학회학술발표논문집, pp549-552.
  8. 이재명, 유정호, 김창덕, 이광재, 임병수 (2008)," 건설 현장 자재수요 변동을 고려한 주문시점 산정 방법", 제24권, 제10호, 대한건축학회논문집, pp117-125.
  9. 이재명, 유정호, 김창덕(2009)," 동적 자재 정보기반 주문량 산정 방법", 제25권, 제12호, 대한건축학회 논문집, pp145-153
  10. 이현수, 송상훈, 김우영(2002)," 정보 분석을 통한 자재관리 프로세스 재설계", 제18권, 제11호, 대한건축학회논문집, pp125-132.
  11. Richard B. Chase, F.Robert Jacobs (2007), "operations and supply management", 한경사,