DOI QR코드

DOI QR Code

Design Process of Fixing Pipe in Guide Pipe-Anchor System for Cable-Stayed Bridge

사장교 가이드 파이프 앵커 형식에서의 정착강관 설계절차

  • 홍성남 (성균관대학교 과학기술연구소) ;
  • 박선규 (성균관대학교 사회환경시스템공학과) ;
  • 박병건 (삼성물산)
  • Received : 2011.04.27
  • Accepted : 2011.06.07
  • Published : 2011.07.30

Abstract

These days, many cable-stayed bridges were constructed in accordance with the trend in Korea. At the moment, construction technology of cable-stayed bridges has been remarkably developed but design technology still relies upon foreign technology very much. The cable anchor system that is one of key technologies of cable-stayed bridge brings powerful cable tension to produce local stress concentration and to disturb stress seriously, so for safety must be designed by a local detailed analysis is required. But without a clear design standard or design theory relying on F.E.M, and engineers don't understand theoretical basic mechanism of cable anchor system. As a result, engineers can be lose their judgement. Accordingly, this study examined theoretical design flow of fixing pipe in guide pipe-anchor system and additional considerations, in accordance with design standards at home and abroad to keep them in order and to suggest supplementary design flow.

최근 들어 인천대교 등 다수의 사장교가 공용 또는 시공 중에 있으며 이러한 시점에서 국내 사장교의 기술력을 살펴본다면 시공기술은 눈에 띄게 발전하였지만 설계기술은 아직 국외 의존도가 매우 높은 실정이다. 사장교 핵심설계요소들 중 케이블 정착구조는 강력한 케이블 장력의 작용으로 국부적인 응력집중현상이 발생하므로 안전성 확보를 위해서는 반드시 국부상세해석에 의한 설계가 요구된다. 하지만 명확한 설계기준이나 이론적 설계 없이 유한요소해석에만 의존하여 설계하는 실정이며 정착구조의 이론적 기본메커니즘을 이해하지 못한 채 유한요소해석 결과에만 의존, 엔지니어의 판단력이 흐려지는 부작용을 가져오고 있다. 이에 따라 본 연구에서는 케이블 정착구조 가이드 파이프앵커 형식 중 정착강관의 기존 이론적인 설계절차를 나타내고 추가적으로 고려해야 할 사항들을 국내외 설계기준에 따라 정리하고 보완 설계절차를 제시하였다.

Keywords

References

  1. 교량설계핵심기술연구단, 도로교설계기준해설, 2008.
  2. 공병승, 박지호, 한정진, "사장교의 케이블 정착구에 관한 구조해석 연구", 한국강구조학회 학술발표논문집, 2006, pp.638-642.
  3. 공병승, 홍남식, "해상 사장교의 Pipe형 케이블 정착구에 관한 구조해석", 한국해양공학회지, 19권, 5호, 2005, pp.34-42.
  4. 박지호, 사장교의 보강형 케이블 정착구 형식별 응력해석 연구, 동서대학교 대학원 석사학위논문, 2007.
  5. 방명석, 박영환, 김영진. 안일상, 박종섭, 장대교량의 설계 및 시공에 관한 연구, 한국건설기술연구원, 1995.
  6. 윤성우, Pipe Anchor 형식의 사장교 보강형 케이블 정착구의 피로강도 수치해석 연구, 동서대학교 대학원 석사학위논문, 2005.
  7. 일본도로협회, 도로교시방서.동해설(II.강교편), 2002.
  8. 한국건설기술연구원, 사장교의 파이프 앵커형식 설계기준 지침, 1997.
  9. 한국전력공사 제1건설처, 영흥도 화력발전소 진입도로 및 교량(2개소) 설계기술 용역 구조 및 수리계산서(I), 1995.
  10. 한진중공업, 유신코퍼레이션, 한국종합기술개발공사, 강사장교-기술과 변천, 도서출판과학기술, 2003.
  11. 한진중공업, 유신코퍼레이션, 한국종합기술개발공사, 사장교의 기본계획 설계법, 도서출판과학기술, 2003.
  12. Incheon Bridge Project, Design Package No. 16 Cable-Stayed Bridge , 2006.
  13. PTI, Recommendations for stay cable design, testing and installation, 5th Edition, 2007.
  14. CEB-FIP, Acceptance of stay cable systems using prestressing steels, 2005.