DOI QR코드

DOI QR Code

특별직교이방성 적층판의 고유진동수에 대한 형상비의 영향

The Influence of the Aspect Ratio on the Natural Frequency of the Specially Orthotropic Laminated Plates

  • 한봉구 (서울과학기술대학교 건설공학부) ;
  • 김덕현 (서울과학기술대학교 건설공학부)
  • 투고 : 2011.01.03
  • 심사 : 2011.09.02
  • 발행 : 2011.11.30

초록

건설기술자들에게는 첨단 복합재료구조에 대한 이론이 너무 어려워서 간단하면서도 쉽게 적용할 수 있는 정확한 방법을 필요로 하고 있다. 단순지지된 적층판을 특별직교이방성 적층판 이론에 의하여 해석하였다. 본 연구에서는 형상비를 1 : 1 ~ 1 : 5 까지 변화시켜가며 해석을 수행하였다. 대부분의 교량이나 건물의 상판은 형상비가 큰 경우가 많은데, 이런 구조물의 평형방정식에 대한 종방항 모멘트항($M_x$)의 영향은 매우 작아서, 더욱 간단한 해석이 가능하다. 본 논문에서는 특별직교이방성 적층판의 고유진동수에 대한 형상비의 영향을 연구하였으며 이 방법을 사용하면 충분히 정확한 값을 산출할 수 있다. 본 논문의 연구의 결과는 단순지지된 특별직교이방성 적층판의 해석에 이용할 수 있다.

Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms($M_x$) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.

키워드

참고문헌

  1. Ashton, J. E., "Anisotropic Plate Analysis- Boundary Condition", Jour. of Composite Materials, April, 1970, pp.162-171,
  2. Goldberg, John E. and Kim, D. H., "The Effect of Neglecting the Radial Moment Term in Analyzing a Sectorial Plate by Means of Finite Differences", Proc, of the Seventh International Symposium on Space Technology and Sciences, Tokyo, Japan, 1967.
  3. Han, B. K. and Kim D. H., "Analysis of Steel Bridges by Means of Specially Orthotropic Plate Theory", Jour. of KSSC, vol 13, No. 1, 2001, pp.61-69.
  4. Han, B. K, and Kim, D. H., "Analysis of Prstressed Concrete Slab Bridge by Beam Theory", Jour. of KISM, vol. 7, No. 2, 2003, pp.115-124.
  5. Han, B. K, and Kim, D. H., "Simple Method of Analysis for Reinforced Concrete Slab Bridges", Jour. of KISM, vol. 7, No. 4, 2003, pp.110-118.
  6. Han, B. K. and Suk, J. W., "The Influence of the Aspect Ratio on the Natural Frequency of the Composite Laminated Plates", Jour. of the Korean Society for Advanced Composite Structures, vol. 1, No. 2, 2010, pp.14-18.
  7. Kim. D. H., "A Method of Vibration Analysis of Irreqularly Shaped Structural Members", Proceedings, International Symposium on Engineering Problems in Creating Coastal Industrial Sites, Seoul, Korea, October, 1974.
  8. Kim, D. H., "Simple Method of Anaysis for Preliminary Design of Certain Composite Laminated Primary Structures for Civil Construction II", Journal of Materials Processing Technology, 55, Elsevier, London, 1993.
  9. Kim, D. H., "Composite Structure for Civil and Architectural Engineering", E & FN Spon, 1st edition, London, 1995,
  10. Pagano, N. J., "Exact Solution for Rectangular Bidirectional Composites and Sandwich Plates", Jour. of Composites Materials, vol. 4, No. 1, 1970, pp.20-34. https://doi.org/10.1177/002199837000400102
  11. Stephen P. Timoshenko, and S. Woinowsky- krieger, "Theory of Plates and Shells, Second Edition", Mcgraw Hill Book Co., 1989.
  12. Whitney, J. M. and Leissa, A. W., "Analysis of a Simply Supported Laminated Anisotropic Rectangular Plate", Jour. of AIAA, vol. 8, No. 1, 1970, pp.28-33, 1970. https://doi.org/10.2514/3.5601