AE 센서 부착법에 따른 치아/복합레진의 파괴 신호 분석

Analysis of Fracture Signals from Tooth/Composite Restoration According to AE Sensor Attachment

  • 구자욱 (한양대학교 대학원 기계공학과) ;
  • 최낙삼 (한양대학교 대학원 기계공학과)
  • Gu, Ja-Uk (Department of Mechanical Engineering, Hanyang University) ;
  • Choi, Nak-Sam (Department of Mechanical Engineering, Hanyang University)
  • 투고 : 2011.08.12
  • 심사 : 2011.10.07
  • 발행 : 2011.10.30

초록

본 연구에서는 치아 시편에 AE 센서를 직접 부착하는 방법과 웨이브 가이드(waveguide)를 사용하는 방법을 이용하여 치아에 충전된 치과용 복합레진의 광중합 수축에 따른 AE 신호를 검출하여 해석하였다. PMMA, 스테인리스 스틸, 인간 치아 시편을 사용하여 AE hit와 AE 진폭(amplitude) 거동을 비교하였다. 웨이브 가이드를 사용한 경우 전파 중에 발생하는 반사파에 의한 파형의 변형으로 진폭 및 hit 수의 감소가 나타났으나, 시편의 재질에 따른 신호의 발생빈도와 1차 중심주파수의 대역은 웨이브 가이드 사용 여부에 따라 차이가 없었다.

Acoustic emission(AE) signals during the polymerization shrinkage of composite resin subjected to the LED light exposure were detected through a wave guide method and a direct sensor attachment method. For PMMA, human tooth, stainless steel substrate, data of AE hits and amplitudes were compared. For the test using the wave guide, AE amplitudes decreased because of the attenuant wave. However, AE hits and 1st peak frequency distribution were not different according to the sensor attachments. Through the experiments, wave guide could be used for a nondestructive evaluation of the marginal disintegrative fracture of dental restoration.

키워드

참고문헌

  1. J. R. Bausch, K. de Lange and C. L. Davidson, "Clinical significance of polymerization shrinkage of composite resins," Journal of Prosthetic Dentistry, Vol. 48, No. 1, pp. 59-67 (1982) https://doi.org/10.1016/0022-3913(82)90048-8
  2. C. J. Kleverlaan and A. J. Feilzer, "Polymerization shrinkage and contraction stress of dental resin composites," Dental Materials, Vol. 21, No. 12, pp. 1150-1157 (2005) https://doi.org/10.1016/j.dental.2005.02.004
  3. N. Iile, K. H. Kunzelmann and R. Hickel, "Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage," Dental Materials, Vol. 22, No. 7, pp. 593-601 (2006) https://doi.org/10.1016/j.dental.2005.05.014
  4. H. Sano, T. Shono, H. Sonoda, T. Takatsu, Bernard Ciucchi, Ricardo Carvalho and David H. Pashley, "Relationship between surface area for adhesion and tensile bond strength-Evaluation of a micro-tensile bond test," Dental Materials, Vol. 10, No. 4, pp. 236-240, (1994) https://doi.org/10.1016/0109-5641(94)90067-1
  5. T. Takemori, H. Chigira, K. Itoh and H. Hisamitsu, "Factors affecting tensile bond strength of composite to dentin," Dental Materials, Vol. 9, No. 2, pp. 136-138, (1993) https://doi.org/10.1016/0109-5641(93)90090-D
  6. I. Krejci, M. Besek and F. Lutz, "Clinical and SEM study of Tetric resin composite in posterior teeth: 12-month results", American Journal of Dentistry, Vol. 7, No. 1, pp. 27-30, (1999)
  7. A. K. Bedran de Castro, L. A. Pimenta, C. M. Amaral and G. M. Ambrosano, "Evaluation of microleakage in cervical margins of various posterior restorative systems", Journal Of Esthetic And Restorative Dentistry, Vol. 14, pp. 107-114, (2002) https://doi.org/10.1111/j.1708-8240.2002.tb00159.x
  8. 구자욱, 최낙삼, Kazuo Arakawa, "음향방출법을 이용한 치아/복합레진 수복재의 계면부 파괴해석", 한국복합재료학회지, 제22권 제6호, pp. 45-51, (2009)
  9. 최낙삼, 김영복, 이덕보, "열-음향방출 기법을 이용한 복합재료의 미세손상 검출 및 평가," 한국복합재료학회지, 제16권, 제1호, pp. 26-33 (2003)
  10. N.-S. Choi, S.-C. Woo and K.-Y. Rhee, "Effects of fiber orientation on the acoustic emission and fracture characteristics of composite laminates," Journal of Materials Science, Vol. 42, pp. 1162-1168 (2007) https://doi.org/10.1007/s10853-006-1445-1