Abstract
In hardware design, its stability and reliability are important, because a hardware error can cause serious damages or disaster. To improve stability and reliability, this paper presents the implementation of the hardware verification system using the fault injection method in PC environment. This paper presents a verification platform that can verify hardware system reliably and effectively, through a process to generate faults as well as insert input signals into the actual running system environment. The verification system is configured to connect a PC with a digital I/O card, and it can transmit or receive signals from the target system, as a verifier's intention. In addition, it can generate faults and inject them into the target system. And it can be monitored by displaying the received signals from the target system to the graphical wave signals. We can evaluate its reliability by analyzing the graphical wave signals. In this paper, the proposed verification system has been applied to the FPGA firmware of a nuclear power plant control system. As a result, we found its usefulness and reliability.
본 논문에서는, 오류가 발생되어 심각한 피해와 문제의 우려가 있는 하드웨어에 대한 안정성 및 신뢰성을 높이기 위해 PC에서 결함 주입 방법을 이용한 검증시스템의 구현 방법을 제시한다. 검증시스템은 PC에 디지털 I/O 카드를 연결하여 대상 하드웨어 시스템에 소프트웨어 및 하드웨어 방법으로 신호를 입력할 수 있으며, 결함을 생성하여 입력할 수도 있다. 그리고 대상 하드웨어 시스템에서 출력되는 신호를 디지털 웨이브폼 그래프로 모니터링이 가능하도록 구현하여 입력 신호에 따른 출력 신호를 비교하여 신뢰성을 평가할 수 있다. 검증시스템을 이용하여 원자력 발전소 시스템 계통장치 FPGA 펌웨어를 테스트 및 검증하였으며, 소프트웨어 방법과 실장테스트 방법에서의 문제점을 해결하여 신뢰성 있는 결과를 얻을 수 있었다.