참고문헌
- K. Kwak, Y. S. Shin, H. J. Kim, H. Y. Kim, 1999, Some Remarks on the Experiment and Finite Element Analysis to Evaluate to Forming Limit of Sheet Metals, Trans. Mater. Process., Vol. 9, No. 4, pp. 379-388.
- Y. K. Ko, J. S. Lee, H. Hun, H. K. Kim, S. H. Park, 2005, Prediction of Fracture in Hub-Hole Expansion Process using New Ductile fracture Criterion, Proc. Kor. Soc. Tech. Plast. Conf., pp. 163-169.
- M. Nurcheshmeh, D. E. Green, Investigation on the Strain-Path Dependency of Stress-Based Forming Limit Curves, Int. J. Mat. Form., Vol. 3.
- International Standard, ISO 12004-2:2008 (E).
- M. G. Cockcroft, D. J. Latham, 1968, Ductility and the Workability of Metals, J. Inst. Met., Vol. 96, pp. 33-39.
- J. R. Rice, D. M. Tracey, On the Ductile Enlargement of Voids in triaxial Stress Fields, 1969, J. Mech. Phys. Solids, Vol 17. pp. 201-217. https://doi.org/10.1016/0022-5096(69)90033-7
- P. Brozzo, B. Deluka, and R. Rendina, 1972, A new method for the prediction of formability in metal sheets, Proceedings of the Seventh Biennial Conference on Sheet Metal Forming and Formability, International Deep Drawing Research Group.
- M. L. Wilkins, R. D. Streit, J. E. Reaugh, 1980, Cumulative-strain-damage model of ductile fracture: simulation and prediction of engineering fracture tests, Technical Report UCRL-53058, Lawrence Livermore National Laboratory.
- PAM-STAMP 2G 2009 User’s Guide, ESI Group.
- H. Y. Kim, J. G. Choi, K. W. Lee, T. J. Yeo, 2008, Cumulative Impact Damage Evaluation of Automotive Aluminum Bumper Beam, Int. J. Mod. Phys. B 22 , pp. 1584-1591. https://doi.org/10.1142/S0217979208047110
- F. Djavanroodi , A. Derogar, 2010, Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets, Mater. Des., Vol. 31, No. 10, pp. 4866-4875. https://doi.org/10.1016/j.matdes.2010.05.030
피인용 문헌
- Investigation of Cracking Condition during Press Forming of Extruded Aluminum Sheets vol.38, pp.3, 2014, https://doi.org/10.3795/KSME-A.2014.38.3.251