References
- Larminie, J. and Dicks, A., 2000, “Fuel Cell System Explained,” John Wiley & Sons, Ltd., Toronto.
- Zhang, L., Pan, M. and Quan, S., 2008, “Model Predictive Control of Water Management in PEMFC,” J. of Power Source, Vol. 180, pp. 322-329. https://doi.org/10.1016/j.jpowsour.2008.01.088
- Vasu, G.., Tangirala, A. K., Viswanathan, B. and Dhathathreyan, K. S., 2008, “Continuous Bubble Humidification and Control of Relative Humidity of H2 for a PEMFC System,” Int. J. Hydrogen Energy, Vol. 33, pp. 4640-4648. https://doi.org/10.1016/j.ijhydene.2008.05.051
- Yang, T., Shi, P. and Du, C., 2006, “Study on Selfhumidified PEMFC with Reactant Circulation,” Electrochimica Acta, Vol. 51, pp. 5618-5625. https://doi.org/10.1016/j.electacta.2006.02.036
- Cave, P., and Merida, W., 2008, “Water Flux in Membrane Fuel Cell Humidifiers: Flow Rate and Channel Location Effects,” J. of Power Sources, Vol. 175, pp. 408-418. https://doi.org/10.1016/j.jpowsour.2007.08.103
- Park, S.-K., Choe, S.-Y. and Choi, S.-H., 2008, “Dynamic Modeling and Analysis of a Shell-and-tube Type Gas-to-gas Membrane Humidifier for PEM Fuel Cell Application,” Int. J. of Hydrogen Energy, Vol. 33, pp. 2273-2282. https://doi.org/10.1016/j.ijhydene.2008.02.058
- Chen, D., Li, W. and Peng, H., 2008, “An Experimental Study and Model Validation of a Membrane Humidifier for PEM Fuel Cell Humidification Control,” J. of Power Sources, Vol. 180, pp. 461-467. https://doi.org/10.1016/j.jpowsour.2008.02.055
- Chen, D. and Peng, H., 2005, “A Thermodynamic Model of Membrane Humidifiers for PEM Fuel Cell Humidification Control,” J. of Dynamic System, Measurement, and Control, Vol. 127, pp. 424-432. https://doi.org/10.1115/1.1978910
- Jung, S. H., Kim, S. L., Kim, M. S., Park, Y. and Lim, T. W., 2007, “Experimental Study of Gas Humidification with Injectors for Automotive PEM Fuel Cell Systems,” J. of Power Sources, Vol. 170, pp. 324-333. https://doi.org/10.1016/j.jpowsour.2007.04.013
- Huizing, R., Fowler, M., Merida, W. and Dean, J., 2008, “Design Methodology for Membrane-based Plate-and-frame Fuel Cell Humidifiers,” J. of Power Sources, Vol. 180, pp. 265-275. https://doi.org/10.1016/j.jpowsour.2008.01.046
- Thanapalan, K. K. T., Liu, G. P., Willians, J. G., Wang, B. and Rees, D., 2009, ”Review and Analysis of Fuel Cell System Modeling and Control,” Int. J of Computer Aided Engineering and Technology, Vol. 1, No. 2, pp. 145-157 https://doi.org/10.1504/IJCAET.2009.022783
- Bao, C., Ouyang, M. and Yi, B., 2006, “Modeling and Control of Air Stream and Hydrogen Flow with Recirculation in a PEM fuel Cell System – I. Controloriented Modeling,” Int. J. of Hydrogen Energy, Vol. 31, pp. 1879-1896. https://doi.org/10.1016/j.ijhydene.2006.02.031
- Vasu, G. and Tangirala, A. K., 2008, “Control of Air Flow Rate with Stack Voltage Measurement for a PEM Fuel Cell,” Int. Conf. on Fundamentals & Developments of Fuel Cells, Nancy, France.
- Pukrushpan, J. T., Peng, H. and Stefanopoulou, A. G.., 2002, “Simulation and Analysis of Transient Fuel Cell System Performance Based on a Dynamic Reactant Flow Model,” Proc. of IMECE, New Orleans, USA.
Cited by
- Numerical Study of Characteristic of Heat and Mass Transfer in Planar Membrane Humidifier According to Flow Direction vol.37, pp.5, 2013, https://doi.org/10.3795/KSME-B.2013.37.5.503