참고문헌
- A. H. Seok and C. H. Lee, “A Study on the Wear Behavior of Plasma Sprayed WC-12% Co/NiCrSiB Mixed Coating,” J. Kor. Inst. Met & Meter., 36 [6] 943-51 (1998).
- B.-Y. Kim, D. Y. Lee, Y.-N. Kim, M.-S. Jeon, J. K. Song, S. Y. Kim, and K. Y. Kim, “Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings. I. Physical Properties of PEO Layer(in Korean),” J. Kor. Ceram. Soc., 47 [3] 256-61 (2010). https://doi.org/10.4191/KCERS.2010.47.3.256
- B.-Y. Kim, D. Y. Lee, M. C. Shin, H.-G. Shin, B.-K. Kim, S. Y. Kim, and K. Y. Kim, “Effect of Al Alloy Composition on Physical and Crystallographical Properties of Plasma Electrolytic Oxidized Coatings II. Crystallographic Analysis of PEO Layer(in Korean),” J. Kor. Ceram. Soc., 47 [4] 283-89 (2010). https://doi.org/10.4191/KCERS.2010.47.4.283
- L. Pawlowsky, The Science and Engineering of Thermal Spray Coatings; pp. 28-52, John Wiley & Sons, New York, 1995.
- S. Sampath, H. Herman, and S. Rangaswamy, pp. 48 in Proc. of 1st National Thermal Spray Conf., Orlando, 1987.
- H. L. Filmer, J. Hochstrasser, A. R. Nicoll, and S. Rangaswamy, “Plasma Spray Deposition of Alumina-Based Ceramic Coatings,” Am. Ceram. Soc. Bull., 69 [12] 1955-58 (1990).
- T. C. Willis, J. White, R. M. Jordan, and I. R. Hyghes, pp. 21 in 3rd Inter. Conf. on Solidification Processing, Sheffield, U.K., 1987.
- R. A. Pike, V. M. Patarini, R. Zatorski, and F. P. Lamm, “Plasma-sprayed Coatings as Adherend Surface Pretreatments,” Inter. J. Adhesion and Adhesives, 12 [4] 227-31 (1992). https://doi.org/10.1016/0143-7496(92)90058-4
-
J. Carr and J. Jones, pp. 43 in Post Densified
$Cr_2O_3$ Coatings for Adiabatic Engine, Kaman Science. Corp. 1990. - B. Kubota, “Decomposition of Higher Oxide of Chromium Under Various Pressures of Oxygen,” J. Am. Ceram. Soc., 44 [5] 239-48 (1961). https://doi.org/10.1111/j.1151-2916.1961.tb15368.x
- K. W. Jzwiak, W. lgnaczak, D. Dominiak, and T. P. Maniecki, “Thermal Stability of Bulk and Silica Supported Chromium Trioxide,” Appl. Catal. A, 253 33-45 (2004).
- A. Rahman, M. H. Mohamed, M. Ahmed, and A. M. Aitami, “Characterization of Chromia/Alumina Catalysts by X-ray Photoelectron Spectroscopy, Proton Induced X-ray Emission and Thermogravimetric Analysis,” Appl. Catal. A, 121 203-16 (1995). https://doi.org/10.1016/0926-860X(94)00204-5
- F. R. Feret, D. Roy, and C. Boulager, “Determination of Alpha and Beta Alumina in Ceramic Alumina by X-ray Diffraction,” Spectrochem. Acta B, 55 1051-61 (2000). https://doi.org/10.1016/S0584-8547(00)00225-1
- Y. K. Park, G. S. Choi, and D. H. Lee, “Effects of Spraying Conditions on the Porosity and Hardness of Plasma Sprayed MgO Stabilized Zirconia Thermal Barrier Coatings,” Kor. J. Mater. Res., 2 [2] 85-94 (1992).
- J. R. Davis, pp. 45 in Handbook of Thermal Spray Technology, ASM International, Ohio, USA, 2004.
- H. Kim, S. Odoul, C. H. Kim, and Y. G. Kwon, “Electrical Insulation Properties of the Plasma Sprayed Ceramic Coatings,” J. Kor. Inst. Met & Meter., 39 [3] 321-27 (2001).
- B. H. Kim and D. S. Suhr, “Effect of Particle Size on the Characterization of Plasma Sprayed Al2O3 Coating Layer,” Kor. J. Mater. Res., 9 [4] 428-33 (1999).